Scotland

Fire Stopping in Glasgow

We cover 171 towns and villages in Glasgow for fire stopping, with failed joints always cut out and a 12-month guarantee on our workmanship.

Fire Stopping in Glasgow

Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.

About fire stopping in Glasgow

We should be clear about what we do and don’t do. The designer, fire engineer or building control decides which fire stopping is required; sign-off sits with them too. We fit the specified fire-rated sealant following that specification and the maker’s installation guidance on sites in Glasgow. Most enquiries involve open linear gaps along the top of fire-resisting walls and openings left by services added after handover, on joints between fire-resisting walls and floors, cable penetrations and service gaps in risers.

Inspect, seal, sign off: every visit follows that pattern. First comes an inspection and agreement on scope, then we prepare and seal each joint with the specified product, and the job ends with a walk round and sign-off.

  1. First we go through the drawings, schedule or specification for the seals and raise any questions before we price.
  2. Every penetration is compared with its detail: wall or floor type, service, gap size and depth.
  3. Anything that doesn’t belong in the opening, such as expanding foam or general-purpose filler, is removed.
  4. We fit the backing the detail asks for, to the stated depth.
  5. Fire-rated or intumescent sealant is gunned in to the specified depth, then tooled.
  6. If an opening needs something other than sealant, we tell you instead of improvising.

What affects the price in Glasgow

Quantities, awkward access and phased working all shape the price. So do site requirements such as inductions and permits.

Why appoint us

  • Health and safety: CHAS accredited
  • One phone line for London, the South East and Scotland
  • A fixed quote before work starts
  • Specification-led, product-correct work

Getting a fixed quote

Need a figure for a tender or a budget? We’ll quote against your scope and drawings you can plan around. If you have questions first, call the office on 01277 525 020 or send photos by email.

Local landmarks in Glasgow

In Glasgow, that means premises near Stirling's Library, St Vincent Street Church and Craigholme School. Other local landmarks include Old Toll Bar (less than half a mile south-west), Glasgow (less than half a mile south-west), Glasgow Academy (0.7 miles north) and Kelvingrove Park (1.1 miles north-west). There’s a railway station in Glasgow itself: Anderston station. Other landmarks nearby include NHS Louisa Jordan (0.7 miles north-west) and Princes Square (0.8 miles east). For a walk, there’s Hogganfield Loch and Cathkin Braes.

  • Nearby schools include Our Lady and St Margaret's Primary School (less than half a mile south-west)

Fire-resisting walls and floors across Glasgow

From Hillhead, Dowanhill and Woodlands to smaller places, buildings across Glasgow are divided into fire compartments. Where fire-rated sealant is the specified product for a service penetration or linear gap, we install it to the manufacturer’s tested detail.

Across Glasgow, outside sealant work is planned around the weather, with a little give in the programme for wet or frosty days.

Glasgow: Hospital estates such as West Glasgow Ambulatory Care Hospital (1.2 miles north-west of Glasgow) are divided into fire compartments, and any service penetration through them should be sealed to the specified, tested detail. On estates like Kingston Bridge Trading Estate, less than half a mile to the south-west of Glasgow, the wall between office and warehouse is often fire-resisting, and cables through it need the specified seal.

Should maintenance staff do it?

There’s also the paperwork. Many sites expect CSCS cards, RAMS and proof of insurance, and our CSCS-carded applicators are used to working under those rules.

General builders and handymen seal joints, but it isn’t their main trade. A specialist brings correct preparation, depth control with backing rod and a product suited to that particular joint, which is what makes a joint last.

Commercial clients in Glasgow

Whether you are a managing agent, a property factor or an owner’s representative: send details, get a fixed quote, we seal, guaranteed. We can agree access arrangements and keyholder contacts beforehand.

Housing associations and managing agents often need work done across blocks and communal areas. Work can be phased so residents and staff keep access throughout, with each stage agreed with your site contact.

Different surfaces, different methods

Plastic pipes

Plastic pipes soften and collapse in a fire. Some intumescent sealants are tested on smaller plastic pipes, though larger ones typically call for a collar or wrap. We check the pipe material and diameter against the detail before we start.

Risers and ceiling voids

Service risers and the voids above ceilings are where openings collect. Access is often tight, so we agree it with you in advance, including keys, permits and any isolations.

Maintenance after handover

For the best life from the joints:

  • Look above ceilings when tiles are lifted for other jobs
  • Record which product was used where
  • Agree the fire-stopping specification before services go in
  • Leave fire sealant to cure fully before covering it

Allow the manufacturer’s stated cure time before boxing in or decorating. Not every fire-rated product can be painted.

A simple record of seal locations and products helps. It tells the next contractor exactly what to reinstate, which saves guesswork.

What affects the price in Glasgow

We price every job individually. The main factors are:

  • Distance, for remote addresses
  • Access and working height
  • The product specified
  • Quantities, in metres or numbers

No two sites price the same: joint size, product, access and site hours all play a part. Send the details and a fixed figure follows.

Sending details for a quote

Whether it’s one area or a whole building, the same details help:

  • The type of building and who uses it
  • When you need the work done
  • The asbestos register, for older buildings
  • Access details, including height

Photos, drawings or a schedule of the joints and a fixed quote comes back to you. Where a site visit makes more sense, we will arrange one.

FAQs: Glasgow

How do we ask for a quote?

There are four steps: send details, receive a fixed quote, we carry out the work, and it’s guaranteed. Step one needs little more than photographs and a postcode.

Can you tell us what fire stopping our building needs?

No, that isn’t our role. Once you have a specification, we can price and install the sealant elements of it and point out anything needing another product.

When is resealing likely to be due?

There’s no fixed lifespan: movement, exposure, cleaning, traffic and the product all play a part. Treat them as maintenance items and inspect them regularly.

How long does a job like this take?

That varies with the scale of the job, though a typical visit typically takes anything from one day to a planned run of visits, depending on the number of seals and the access. Larger or phased jobs take longer, and we will give you a timescale with the quote.

Will you quote for a small job?

Whatever the size, the process is the same: details, then a fixed price, then sealing, then a 12-month guarantee.

What happens if old sealant might contain asbestos?

Some older mastics, especially in pre-2000 buildings, can contain asbestos. Before we disturb old sealant in an older building, we ask to see the asbestos register or survey, and work stops until any suspect material has been tested. Removing asbestos is a job for asbestos specialists, not us.

Is your workmanship covered by a guarantee?

Yes. Our workmanship is backed for 12 months on every job.

Every town and village in Glasgow

A

B

C

D

E

F

G

H

I

J

K

L

M

N

O

P

Q

R

S

T

W

Y

Accreditations

Trusted. Accredited. Insured.