Fire stopping in Muirend
Sealant work in Muirend for main contractors, managing agents and facilities managers: fire-rated and intumescent sealing of service penetrations and linear gaps, with a fixed quote first.
- Head-of-wall gaps with no fire seal
- Openings left by services added after handover
- Old intumescent sealant that has split away
Fire stopping for businesses in Muirend
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Fire stopping for commercial buildings in Muirend
A fire-rated sealant is only one part of a tested system: the evidence covers a specific product, wall or floor type, service, gap, depth and backing. We match each opening to that detail before any sealant goes in, and we say so if it doesn’t fit. We work on cable penetrations, service gaps in risers and pipe penetrations, and the usual reasons a site gets in touch are hidden openings found during inspections and openings left by services added after handover. For commercial sealant work in Muirend, you deal with one contact from quote to sign-off, for single jobs and planned programmes alike.
Large city estates in Scotland, from universities to hospitals and offices, are re-serviced constantly, and each new run of cable or pipe through a compartment wall needs sealing. New openings are closed with the specified fire-rated product, following its test evidence.
We sign every job off with a 12-month guarantee. It’s a plain promise: if our work fails within that year, we put it right.
- Where
- Muirend (G43, G44, G46)
- Wider area
- Glasgow
- Cover
- 12 months on every job
- Quotes
- A fixed quote before we start
- Call
- 01277 525 020
- Updated
- 3 November 2026
After the work
Every sealant joint needs some looking after, and how long they last depends on how they’re treated. Our advice:
- Check with the data sheet before painting over fire sealant
- Brief every trade that openings they make must be sealed
- Foam or ordinary sealant is never a fire-seal repair
- Look above ceilings when tiles are lifted for other jobs
After the work, brief anyone else working in the area that the openings are now sealed. Any seal cut back for a new service needs reinstating to its tested detail, by someone who knows the system.
Specify fire stopping early on refits, not as an afterthought. The designer can then choose details that suit the services planned, and installation follows the programme.
Other services in Muirend
What sets the cost
What shapes the price:
- Whether the work must be split into stages
- Travel to remote or island sites
- Backing rod, priming and other preparation
- Access and working height
What a job costs comes down to the quantity of joints, how much old material needs removing and the access. Call for a quote once you have the details.
Details that help us quote
Good information means a firmer quote. Helpful details to send:
- The site address and postcode
- What the building is and how it’s used
- The product your specification calls for
- When you need the work done
For a fixed quote, call 01277 525 020 or email us. You can also send details through our quote form.
Fire-rated sealing for Muirend buildings
A 2-mile radius around Muirend takes in several hotels. In hotels, bedroom and corridor walls are usually fire-resisting, so services added in a refit need sealing with the specified product. Scotland has its own building standards: the non-domestic Technical Handbook (clause 2.1.14) says service penetrations should be fire stopped to at least the fire resistance duration of the wall or floor, using products tested for the way they’re used. We install what’s specified, to the product’s tested detail.
For a unit at a site such as Auldhouse Retail Park (0.9 miles north-west of Muirend), any new service through a fire-resisting wall should be sealed to the tested detail. For a hotel such as Orchard Park Hotel (0.9 miles south-west of Muirend), penetration seals are worth checking after any refit or services upgrade.
Muirend is about 3 miles south of Glasgow, in Glasgow. We cover commercial sites throughout Muirend, whether it’s a single job or part of a planned programme. Muirend is one of 171 places in Glasgow on our list.
We cover the G43, G44 and G46 postcode districts for service penetrations. We cover commercial and managed buildings on Briar Road, Broom Road and Elrig Road and the roads nearby. We also cover Newlands (1 mile north-west), Merrylee (1 mile west), Cathcart (1 mile north-east), Hillpark (1 mile west) and Langside (1 mile north) for service penetrations. A short drive away, we cover Glasgow (3 miles north), Hillhead (4 miles north), Dowanhill (5 miles north), Woodlands (4 miles north), Woodside (4 miles north) and North Kelvinside (5 miles north).
Around Muirend
Recent enquiries here include premises near Couper Institute and Library and Queen's Park. There’s a railway station in Muirend itself: Muirend station. A little further out are Silverburn Shopping Centre (2.5 miles west) and Scottish Football Museum (1.4 miles north-east). Open spaces near Muirend include Cathkin Braes.
Why deal with it now?
A seal that doesn’t match its tested detail gives false comfort. Correcting it means cutting it out and starting again with the specified product, so it makes sense to get it right first time. In a Scottish city, access often needs scaffold, permits or factor approval, so it makes sense to renew every failing joint while it’s in place.
There’s no price list, because the scope varies so much from one building to the next. Call for a quote and we will price your job on its own details.
What you get with us
- One number for every site we cover
- Fully insured
- Failed material removed, not covered up
- Commercial sealant work since 2005
Read how commercial sealant jobs are priced or our accreditations and insurance.
Doing it in-house
What you see is the finished bead, but most of the work is hidden. Correct depth, the right primer and a sealant matched to the movement are easy to get wrong without experience.
Paperwork matters too. Many sites expect CSCS cards, RAMS and proof of insurance, and we will confirm the paperwork you need with the quote.
How a job runs
A typical day starts with protection: tape along each joint edge and covers over finishes, stock and equipment close by. On site, the work usually takes longer where risers, ceiling voids or occupied floors have to be worked through in sequence, and we clear our waste as we work. In a Scottish city, kerbside space and loading need planning, especially near the centre. Tenement closes, shared stairs and factor approvals may also be involved.
- We read the specification, drawings or penetration schedule you send and ask about anything unclear.
- Every penetration is compared with its detail: wall or floor type, service, gap size and depth.
- Unsuitable fillers and loose debris are taken out of each opening.
- We fit the backing the detail asks for, to the stated depth.
- Fire-rated or intumescent sealant is gunned in to the specified depth, then tooled.
- If an opening needs something other than sealant, we tell you instead of improvising.
Getting the site ready
- Have the specification and drawings to hand
- Move anything stored against the joints
- Send asbestos survey details if the building is pre-2000
Getting a fixed quote
Tell us about the building, the joints and when you need the work done, and we’ll put a fixed quote together. To get it moving, speak to us on 01277 525 020 or send details through our quote form.
Read more
Common problems we fix in Muirend
When a seal departs from its tested detail, the evidence no longer covers it. An oversized gap, too shallow a bead, missing backing or two makers’ products combined are what we find most often.
Things that normally lead to an enquiry:
- Open linear gaps along the top of fire-resisting walls
- Snag lists that include open service penetrations
- Openings left by services added after handover
- Seals that don’t match their tested detail
For an estates team at a campus like University of Strathclyde (3.7 miles north of Muirend), summer M&E works are usually followed by a round of penetration sealing.
What your quote should include
- How joint depth will be controlled
- Will RAMS and insurance details be available?
- Which product they’ll use, and why it suits the joint
- How they’ll work around occupants
Common questions from Muirend clients
Can you work on a hospital site such as New Victoria Hospital?
Yes. We work in healthcare settings as well as offices and schools. We follow the site’s permits, sign-in and infection-control procedures in every area.
Do you cover business parks and estates near Muirend, such as Auldhouse Retail Park?
Yes. We cover Muirend and the area around it, including industrial estates, business parks and retail parks such as Auldhouse Retail Park. Send details of the unit and the work through our quote form for a quick quote.
Will you just go over the old sealant?
No. We cut the old material out and clean the joint back before sealing, since fresh sealant will not bond reliably to aged material.
Can you fire stop behind the services contractors?
Yes, provided a specification covers them. Openings left by new services are among the most common jobs we see and we close them with the specified product.
Is the work guaranteed?
Yes. Workmanship is guaranteed for 12 months.
Can you follow the specification on our project?
Yes. Include it with the drawings when you ask for a quote, and we’ll price the work to it.
When can the area be used after sealing?
The product and site conditions decide that. Some products skin over quickly but need longer to cure fully, so we’ll confirm the curing time on the day.