Fire-rated sealing and fire stopping in Broomhill, Glasgow
Work needed on a service penetration in Broomhill? We assess it, carry out the work and guarantee our workmanship for 12 months.
- Penetration schedules that need working through
- Seals disturbed by maintenance and left open
- Fire stopping installed outside its tested range
Fire stopping for businesses in Broomhill
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Questions we are asked in Broomhill
What do Scotland’s building standards say about service penetrations in Broomhill?
Scotland’s non-domestic Technical Handbook covers it in clause 2.1.14: penetrations keep at least the element’s fire resistance duration, with products tested for their end use. We install what has been specified, to the manufacturer’s tested detail, while design and approval sit with the designer and the verifier.
Will you take on work at estates like Meadow Road Industrial Estate, close to Broomhill?
Yes. Our area takes in Broomhill and its surroundings, with estates and business parks such as Meadow Road Industrial Estate included. A few photos and the unit address let us price the work.
How do I request a quote?
The quote form is the simplest route, though you can also call 01277 525 020 or email us. Include photographs or drawings if you have them.
Do you need to see the site first?
It depends on the job. Straightforward work can often be priced from photographs and measurements, while larger or less clear jobs get a site visit first.
Who decides which product is used?
A specification, where there is one, decides it. If there isn’t one, it comes down to the joint: how much it moves, what it bonds to and whether it’s wet, trafficked or fire-rated.
Is colour matching possible?
Often, yes. Sealants are made in a wide range of standard colours, and matching to RAL references or nearby finishes is commonly requested. We confirm what’s available for the specified product when we quote.
Is Broomhill in your area?
Yes. We cover Broomhill and the rest of Glasgow. For a quote, speak to us on 01277 525 020 or email a schedule or drawings.
Fire stopping in Broomhill
Facilities managers in Broomhill often find open service penetrations when ceilings come down for other work. Where the walls and floors already have a fire-stopping specification, we can work to it. With no specification in place, the first step sits with your designer or fire engineer, not with us. The enquiries we see most involve unsealed joints where partitions meet the slab and builders’ foam or ordinary silicone in compartment walls, on service gaps in risers, small duct penetrations where the tested detail allows and joints between fire-resisting walls and floors. Whoever orders the work in Broomhill, the brief is usually the same: a fixed quote, no surprises on site and a 12-month guarantee behind the result.
Older stone and tenement buildings in Scotland’s cities have usually been re-serviced many times. Before sealing, we confirm the wall or floor and the services passing through, so the product matches the detail.
Building owners and contractors get the same cover: twelve months on the work we carried out. It doesn’t extend to damage, faults in the building or work by others, and we’re upfront about that.
- Where
- Broomhill (G11, G14, G12)
- Wider area
- Glasgow
- Guarantee
- 12 months on our workmanship
- Quote
- Quoted before any work starts
- Telephone
- 01277 525 020
- Updated
- 3 November 2026
From enquiry to sign-off
Our CSCS-carded applicators arrive with the sealants, primers and backing rod the job calls for. Joint faces are cleaned back to sound, dry surfaces, primer goes on where the manufacturer specifies it, and each bead is tooled to a neat concave finish. For premises in Broomhill, tell us about access times, shared entrances and any building rules, so the work can be phased and areas kept in use.
- First we confirm the product and tested details named in the specification.
- Openings are measured and grouped by detail.
- Improvised fillers and failed sealant are removed.
- Where the detail needs backing, it goes in at the stated depth.
- We gun the sealant in to the specified depth around each service and tool it.
- Completed areas are checked with you, with the records agreed when we quoted.
Getting the site ready
- Let us know about inductions and permits
- Warn occupants and staff about the work
- Point out parking and an unloading spot
Quotes
Quotes are fixed against the scope you send, so the cost is agreed before work starts. To ask for one, call 01277 525 020 or email a schedule or drawings.
Read more
Where services cross fire walls in Broomhill
Two care or nursing homes sit less than 2 miles from Broomhill. In a care home, any new pipe or cable through a fire-resisting wall should be sealed to the specified detail. We install fire-rated sealant to the tested detail where it is specified. The area within 2 miles of Broomhill holds a good number of hotels. A hotel refit often runs new services through compartment walls between bedrooms and corridors, and each opening needs the specified seal.
For an estates team at a campus like University of Glasgow Gilmorehill Campus, 1.4 miles east of Broomhill, summer M&E works are usually followed by a round of penetration sealing. Theatres, wards and plant rooms at sites like Gartnavel Royal Hospital (to the north of Broomhill) all have compartment walls crossed by services.
Broomhill is about 2 miles east of Renfrew, in Glasgow. Businesses, contractors and managing agents in Broomhill use us for work on service penetrations, as part of our coverage of Glasgow. Our Glasgow coverage takes in 171 places.
Anyone looking for fire stopping in G11, G14 and G12 gets the same process as the rest of our area: details, then a fixed price, then sealing and a 12-month guarantee. We cover commercial and managed buildings on Crow Road, Dyce Lane and Morna Lane and the roads nearby. Being close to the A739 and A814, Broomhill is easy to get to with materials and equipment. Nearby places we also cover include Thornwood (1 mile south-east), Whiteinch (1 mile south-west), Hyndland (1 mile east), Partickhill (1 mile east) and Partick (1 mile south-east). Bigger towns within reach include Calton (4 miles south-east), Langside (4 miles south-east), Cowcaddens (3 miles east), Mount Florida (5 miles south-east), Hillpark (4 miles south) and Shawlands (4 miles south-east).
Local landmarks in Broomhill
In Broomhill, that means premises near Victoria Park, St Peter's Boys School and Glasgow University Library. Other local landmarks include Ladywell School (less than half a mile south-west) and The Esquire House (0.9 miles north). Broomhill has its own railway station: Hyndland station. Other landmarks nearby include Glasgow Museum of Transport (1.2 miles south-east) and Braehead (1.6 miles west). For a walk, there’s Kilmardinny and Castle Hill.
Commercial clients in Broomhill
We take on planned maintenance as well as one-off repairs: working through a building or an estate in stages that fit your budget. Sites in Broomhill can sit alongside others in a wider programme across Glasgow.
Hospitality, education, healthcare, office and retail clients come to us directly as well. We plan around the way the building is used, so the building keeps working while we do.
What happens if it’s left?
A seal that doesn’t match its tested detail gives false comfort. Correcting it means cutting it out and starting again with the specified product, so it makes sense to get it right first time. Failed sealant in a shared building in Broomhill can affect more than one owner. Fixing it promptly keeps repairs small.
Access can matter as much as the joints themselves: joints within easy reach take less time than ones that need access equipment. Mention the access as part of your enquiry.
Why us?
- Health and safety: CHAS accredited
- Joints cleaned back to sound surfaces
- Sealing commercial buildings since 2005
- Fully insured
Doing it in-house
Certain joints really need a specialist: for instance fire-rated seals that must match a tested detail, trafficked floor joints and external movement joints. A poor seal in places like these tends to cost more to put right later.
Site maintenance staff can often handle a short internal joint. The usual problems come from preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.
What sealant work can’t fix
Sealant solves a lot, but not everything, and we’re upfront when that’s the case. It won’t fix:
- Large openings beyond what any sealant detail covers
- Approving the work on behalf of building control
- Designing or specifying fire stopping, which sits with the designer or fire engineer
Not sure which it is? You can speak to us on 01277 525 020 or send photos by email and we’ll tell you honestly.
Joints and surfaces we work on
- Pipe penetrations
- Cable penetrations
- Service gaps in risers
- Joints between fire-resisting walls and floors
- Small duct penetrations where the tested detail allows
- Linear gaps at wall heads
What we’re called out for in Broomhill
Head-of-wall joints and wall-to-wall junctions are frequent weak points. Movement in the frame or slab can open the joint, and a product not tested for that movement may crack. The tested detail for a linear joint states the width and movement it covers.
Things that usually lead to an enquiry:
- Openings left by services added after handover
- Unsealed penetrations discovered above suspended ceilings
- Non-fire-rated filler around services
- Unsealed joints where partitions meet the slab
At a college such as Glasgow Clyde College - Anniesland Campus, which lies north of Broomhill, checking penetration seals after summer M&E works is good practice.
Comparing quotes
- Whether primer will be used where the manufacturer specifies it
- Their pre-qualification and accreditations
- How they handle RAMS and site documents
- How long is the guarantee, and what does it include?