Fire stopping in Hogganfield
Fire stopping for Hogganfield, from a contractor working since 2005. Fully insured, with a 12-month guarantee.
- Openings left by services added after handover
- Penetration schedules that need working through
- Seals disturbed by maintenance and left open
Fire stopping for Hogganfield sites
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
About our fire stopping in Hogganfield
Facilities managers in Hogganfield often find open service penetrations when ceilings come down for other work. If a specification already covers those walls and floors, we can reseal to it using the product and detail it sets out. Where there isn’t one, the designer or fire engineer needs to set one first. If you have unsealed joints where partitions meet the slab and fire-stopping items raised at inspection or handover, we can help. Most enquiries from Hogganfield start with one failed joint and grow into a wider look at the building: we look at the rest while we are there and tell you what we find.
Hotels and care homes around smaller places like Hogganfield often have services added during refurbishment. A round of checks after M&E work is good practice, and any gaps found are sealed where fire-rated sealant is specified.
The 12-month guarantee covers our workmanship: preparation, application and finish. It doesn’t extend to damage, other trades’ later work or movement the joint was never designed to take.
- Where
- Hogganfield (G33, G21)
- Region
- Glasgow
- Cover
- 12 months on every job
- Price
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Updated
- 3 November 2026
How the job changes by surface
Risers and ceiling voids
Service risers and the voids above ceilings are where openings collect. Access is often tight, so we agree it with you in advance.
Drylining partitions
Holes in board are often cut larger than needed. An oversized hole may be outside the sealant’s range.
Towns and villages near Hogganfield
What else we do in Hogganfield
Work for main contractors and building owners
Blocks and communal areas make up much of the work for housing associations and agents. We phase the work so people keep access, with each stage agreed with your site contact.
CHAS accredited and a Constructionline member, we make supplier vetting simple. Our insurance certificate can be sent along with the quote.
Questions we’re asked in Hogganfield
Will you take on work at estates like Glasgow North Retail Park, close to Hogganfield?
Yes, sites like Glasgow North Retail Park are within our area, along with the rest of Hogganfield. Send details of the unit and the work through our quote form for a quick quote.
How do Scotland’s building standards affect fire-rated sealant in Hogganfield?
The non-domestic Technical Handbook, clause 2.1.14, expects a penetration to keep at least the wall or floor’s fire resistance period, with proprietary products tested for the use they’re put to. Design sits with the designer and the verifier; installation to the tested detail is our part.
Will your applicators have CSCS cards?
Yes. Should the site need card details in advance, let us know and we will send them with the quote.
Can you send site paperwork?
Each site asks for different documents, so list what you need, whether RAMS, insurance or CSCS details, and we’ll confirm with the quote.
Do you offer coloured sealant?
In many cases, yes. Many products come in a range of standard colours, and matching to RAL references or surrounding finishes is often possible. We will confirm the colours available for the specified product.
Do you guarantee your work?
Yes, for 12 months. If a joint fails because of how we installed it, we come back and put it right.
Which sealant will you use?
A specification, where there is one, decides it. Without one, the joint decides: how much it moves, what it bonds to and whether it’s wet, trafficked or fire-rated.
Service penetrations in Hogganfield buildings
Under the Scottish non-domestic Technical Handbook, clause 2.1.14, penetrations should be fire stopped to at least the wall or floor’s fire resistance duration, with proprietary products, intumescent ones included, tested for their end use. Our part is installing the specified fire-rated sealant to its tested detail.
Large healthcare estates like Lightburn Hospital, 1.5 miles to the south of Hogganfield, change their services often, so penetration seals are worth checking after M&E work. For a site team at a college like Glasgow Kelvin College - East End Campus (1.9 miles south-west of Hogganfield), fire-rated sealing is best scheduled after the summer works. At a university such as University of Strathclyde, 1.1 miles to the south-west of Hogganfield, labs, lecture blocks and residences are re-serviced often, so penetration seals are best checked after M&E work.
Hogganfield is about 2 miles south-east of Bishopbriggs, in Glasgow. Anywhere in G33, the process is the same: details in, fixed quote out, then sealing and a 12-month guarantee. Hogganfield is one of 171 places we cover in Glasgow for service penetrations.
Anyone looking for fire stopping in G33 and G21 gets the same process as the rest of our area: details, then a fixed price, then sealing and a 12-month guarantee. If your site is on Station Road, Coshneuk Road and Cessnock Road or close by, send details and we’ll quote for service penetrations. You’ll find Hogganfield on or near the M80 and A80. Sites close to Hogganfield are covered too, including Millerston (1 mile north-east), Ruchazie (1 mile south), Craigend (1 mile south-east), Riddrie (1 mile south-west) and Robroyston (1 mile north). Nearby towns on our patch include Glasgow (4 miles south-west), Hillhead (4 miles west), Dowanhill (5 miles west), Woodlands (4 miles west), Woodside (4 miles west) and North Kelvinside (4 miles west).
What’s near Hogganfield
Around Hogganfield, our work takes us to commercial buildings near St Andrew's Secondary School and the streets around them. Hogganfield has its own railway station: Robroyston station. Other landmarks nearby include Lightburn Hospital (1.5 miles south) and Tollcross Museum (2.3 miles south). For a walk, there’s Lenzie Moss and Hogganfield Loch.
After the work
After handover, a little attention goes a long way:
- Record which product was used where
- Get seals inspected before ceilings and boxing close
- Flag new cables with no seal around them
- Put resealing into every M&E and fit-out package
During planned inspections, look at seals in risers, cupboards and voids. Watch for cracked sealant, new services with no seal and openings that have grown.
Make reporting new openings part of every permit to work in service areas. Small habits like this stop openings building up.
Why it’s worth doing now in Hogganfield
An open or wrongly sealed service penetration lets fire and smoke reach the next compartment much sooner than the building was designed for. Putting it right is typically a modest job when the openings are accessible. Left until ceilings are closed or a tenant moves in, the same work costs more access and more disruption. Around smaller places like Hogganfield, halls, stores and seasonal buildings may not be checked often, giving water time to get in. Resealing early avoids that.
Access often affects the price as much as the sealing: joints within easy reach take less time than ones that need access equipment. Tell us how the joints are reached and call for a quote.
Why clients in Hogganfield choose us
- Workmanship guaranteed for 12 months
- Fixed quotes based on photographs, drawings or a visit
- Constructionline member for supplier checks
- Work to your specification and the manufacturer’s guidance
Take a look at our cost guide and how we’re accredited.
How a job runs
A typical day starts with protection: masking tape along the joint edges and sheeting over anything nearby. The work itself normally takes anything from one day to a planned run of visits, depending on the number of seals and the access, and we clear our waste as we work. Travel to smaller Scottish places like Hogganfield is planned so the job is finished in one visit where possible, which is why we ask for photos and a full list first. External joints need a dry spell as well.
- We read the specification, drawings or penetration schedule you send and raise any questions before we price.
- Every penetration is compared with its detail: wall or floor type, service, gap size and depth.
- Unsuitable fillers and loose debris are taken out of each opening.
- We fit the backing the detail asks for, to the stated depth.
- Fire-rated or intumescent sealant is gunned in to the specified depth, then tooled.
- If an opening needs something other than sealant, we tell you instead of improvising.
What we need from you
- Arrange parking or a loading space
- Confirm the product named in the specification
- Let us know about inductions and permits
Getting a fixed quote
To get a fixed quote, call 01277 525 020 or email us. Our quote form is another easy route.
Advice
Site staff or a sealant specialist?
Redoing a failed joint normally costs more than getting it right at the outset, since all of it has to come out and the faces be cleaned back again. That’s why many clients bring in a specialist from the beginning.
Some joints are best left to specialists: fire-rated seals that must follow a tested detail, trafficked floor joints and external movement joints among them. A poor seal in places like these tends to cost more to put right later.