Fire stopping in Pollokshields
Fire-rated and intumescent sealing of service penetrations and linear gaps across Pollokshields, by CSCS-carded applicators. Fully insured and CHAS accredited.
- Unsealed joints where partitions meet the slab
- Hidden openings found during inspections
- Fire stopping installed outside its tested range
Fire stopping in Pollokshields
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Do you need fire stopping in Pollokshields?
Damage plays a part too. Maintenance work can knock a seal, cut it back for an extra cable or remove it with an old pipe.
These are often picked up first by site or facilities staff:
- Fire stopping installed outside its tested range
- Snag lists that include open service penetrations
- Old intumescent sealant that has split away
- Unsealed joints where partitions meet the slab
For a site team at a college like Glasgow Clyde College - Langside Campus, 1.1 miles to the south-east of Pollokshields, fire-rated sealing is best scheduled after the summer works.
What to look for in a quote
- How joint depth will be controlled
- Will CSCS-carded applicators be on site?
- What site paperwork they can supply
- What level of public liability insurance do they hold?
About our fire stopping in Pollokshields
Penetration seals are fire tested to BS EN 1366-3 and linear joint seals to BS EN 1366-4, with results classified under BS EN 13501-2. A rating such as EI 60 only holds when the product is installed as it was tested. So our job is to reproduce that arrangement faithfully. If you have builders’ foam or ordinary silicone in compartment walls and snag lists that include open service penetrations, we can help, whatever the surface. Whoever orders the work in Pollokshields, the brief is typically the same: a fixed quote, no surprises on site and a 12-month guarantee behind the result.
In Scotland’s cities, university, hospital and office estates see services added year after year, and new cabling and pipework through compartment walls is a common reason fire stopping gets breached. New openings are closed with the specified fire-rated product, following its test evidence.
We stand by our work: 12 months, guaranteed. That covers our preparation and application, and if something we did falls short, we return to it.
- Location
- Pollokshields (G41, G42, G5)
- Region
- Glasgow
- Guarantee
- 12 months on every job
- Quotes
- Quoted before any work starts
- Phone
- 01277 525 020
- Page updated
- 3 November 2026
Work for main contractors and building owners
Hospitality, education, healthcare, office and retail clients book us directly too. We plan around the way the building is used, so guests, pupils, patients or staff are disturbed as little as possible.
CHAS accredited and a Constructionline member, we make supplier vetting simple. We’re fully insured, and our insurance certificate can go with the quote.
Towns and villages near Pollokshields
Also in Pollokshields
Quoting for work in Pollokshields
These are the things that shape the price:
- Location, for remote and island sites
- Whether old sealant has to be cut out first
- Access and working height
- Joint width, depth and condition
We don’t publish prices, since every building and every scope is different. Call for a quote.
Details that help us quote
We can often quote from photographs and a few details. It helps to include:
- Asbestos survey details if the building is older
- The type of building and who uses it
- Clear photographs of the problem areas
- Specification clauses that apply
Photos, drawings or a schedule of the joints and a fixed quote comes back to you. Where a site visit makes more sense, we’ll arrange one.
Different surfaces, different methods
Plastic pipes
Plastic pipes soften and collapse in a fire. Some intumescent sealants are tested on smaller plastic pipes, though larger ones normally call for a collar or wrap. We check the pipe material and diameter against the detail before we start.
Linear joints
Head-of-wall gaps, slab edges and wall junctions are linear joints. BS EN 1366-4 testing sets the joint widths, depths, backing and movement a seal covers, and we work within it.
Honest limits
We check first that sealant really is the fix. It won’t put right:
- Plastic pipes whose detail calls for a collar or wrap
- Issuing fire ratings or certificates for seals
- Fire risk assessments, a job for a competent assessor
If you are not sure, just give us a call on 01277 525 020 or use the quote form and we will give you a straight answer before you book.
Surfaces we seal
- Small duct penetrations where the tested detail allows
- Joints between fire-resisting walls and floors
- Linear gaps at wall heads
- Service gaps in risers
- Cable penetrations
- Pipe penetrations
How a job runs
We bring the products specified for the job, along with primers and backing rod. Any old material is cut back to clean, sound faces, primer goes on where the manufacturer specifies it, and the sealant is tooled off neatly. Give us the access times and building rules for your premises in Pollokshields, and we will plan the work to suit, phased where areas need to stay in use.
- First we go through the drawings, schedule or specification for the seals.
- On site, each opening is checked against the tested detail it is meant to follow.
- Anything that doesn’t belong in the opening, such as expanding foam or general-purpose filler, is removed.
- We fit the backing the detail asks for, to the stated depth.
- Fire-rated or intumescent sealant is gunned in to the specified depth, then tooled.
- Openings that need a collar, wrap, batt or other product are flagged to you rather than filled with sealant.
Before we start on site
- Clear stock, furniture or equipment away from the joints
- Point out parking and an unloading spot
- Let building users know which areas are affected
Quotes
Need a figure for a tender or a budget? We’ll quote against your scope and drawings you can plan around. If you have questions first, give us a call on 01277 525 020 or email the details over.
Related advice
Your questions answered
Can you work at a site such as Centurion Business Park, by Pollokshields?
Yes. Our area takes in Pollokshields and its surroundings, with estates and business parks such as Centurion Business Park included. A few photographs and the unit address let us price the work.
How do the Scottish rules apply to fire-rated sealing in Pollokshields?
Scotland’s non-domestic Technical Handbook covers it in clause 2.1.14: penetrations keep at least the element’s fire resistance duration, with products tested for their end use. The detail is set by the designer and goes through the warrant process; we install the specified product to its tested detail.
Can the building stay open while you work?
Yes, with some planning. We agree a sequence with your contact so just one area at a time is disrupted.
Can you fit around our working hours?
The office is staffed Monday to Friday, from 8am until 5pm. Let us know your site hours and access windows, and the work will be planned around them.
When is resealing likely to be due?
There’s no fixed lifespan: movement, exposure, cleaning, traffic and the product all play a part. Sealant joints are maintenance items, so inspect them regularly.
Are you fully insured?
Yes. We’re fully insured, and the certificate can go with your quote.
Is the work guaranteed?
Yes, for 12 months. If our installation fails in that time, we return and fix it.
Fire stopping around Pollokshields: points for this area
Under the Scottish non-domestic Technical Handbook, clause 2.1.14, penetrations should be fire stopped to at least the wall or floor’s fire resistance duration, with proprietary products, intumescent ones included, tested for their end use. We install what’s specified, to the product’s tested detail. There are three care or nursing homes within about 2 miles of Pollokshields. Care homes rely on fire-resisting walls and floors, and maintenance work that breaks through them leaves openings to seal.
Shop fits in centres such as Crown Street Retail Park (to the east of Pollokshields) can bring new services through fire-resisting walls between units, which then need the specified seal. On a hospital site such as New Victoria Hospital, which lies south-east of Pollokshields, fire-rated sealant goes in where the specification calls for it, with the work planned around the estates team’s permits.
Pollokshields is about 1 mile south of Glasgow, in Glasgow. Our applicators travel to Pollokshields for work on service penetrations, handled exactly as we handle every other area. Pollokshields is one of 171 places we cover in Glasgow.
Anyone looking for fire stopping in G41, G42 and G5 gets the same process as the rest of our area: details, then a fixed price, then sealing and a 12-month guarantee. Streets here include Bruce Road, Minard Road and Leslie Road. Sites close to Pollokshields are covered too, including Strathbungo (1 mile south-east), Crossmyloof (1 mile south-west), Kinning Park (1 mile north-west), Govanhill (1 mile east) and Crosshill (1 mile south-east). Further afield, our area takes in Dowanhill (3 miles north), North Kelvinside (3 miles north), Partickhill (3 miles north-west), Kelvinside (3 miles north), Hyndland (3 miles north-west) and Wyndford (3 miles north).
Local landmarks in Pollokshields
We work on buildings around Shawlands Academy, Glasgow Women's Library and 51 pub, among other places. Nearby too are Queen's Park (0.8 miles south-east) and Our Lady and St Margaret's Primary School (0.7 miles north). There’s a railway station in Pollokshields itself: Pollokshields West station. Other landmarks nearby include Princes Square (1.6 miles north-east) and Scotland Street School Museum (0.7 miles north). The countryside around Pollokshields includes Hogganfield Loch and Cathkin Braes.