Fire Stopping in Carntyne
We carry out fire-rated and intumescent sealing of service penetrations and linear gaps in Carntyne. Send photographs or drawings for a fixed quote.
- Open linear gaps along the top of fire-resisting walls
- Openings found when ceilings come down for a refit
- Penetration schedules that need working through
Need fire stopping in Carntyne?
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Fire stopping in Carntyne
Our applicators are CSCS-carded, and we are CHAS accredited and a Constructionline member. We don’t hold a third-party fire-stopping installer certificate, and we won’t pretend otherwise. We install the specified fire-rated sealant to its tested detail, and our workmanship carries a 12-month guarantee. We work on pipe penetrations, joints between fire-resisting walls and floors and cable penetrations, and the failures we are asked to look at most are improvised or mixed-product fire seals and unsealed joints where partitions meet the slab. One point of contact handles commercial sealant work in Carntyne from the first photos to the final walk-round, whether it’s one building or several.
Under Scotland’s building standards, a service penetration should keep at least the fire resistance duration of the wall or floor it passes through. In Carntyne, penetrations get the fire-rated sealant the specification asks for, built to its tested arrangement.
What our 12-month guarantee covers is the way we did the job: the preparation, the sealing and the tooling. Damage, later alterations by others and movement beyond what the joint was designed for sit outside it.
- Place
- Carntyne (G33, G32, G31)
- Region
- Glasgow
- Guarantee
- 12 months on our workmanship
- Quote
- Fixed quote, scope in writing
- Phone
- 01277 525 020
- Last updated
- 3 November 2026
Surface by surface
Small ducts
Small ductwork can sometimes be sealed with sealant where the tested detail includes it. Larger or fire-rated ductwork normally needs a different solution set by the designer, and we’ll say if that applies.
Risers and ceiling voids
Risers and ceiling voids hold most of a building’s service penetrations. Access is often tight, so we agree it with you in advance.
Where services cross fire walls in Carntyne
In Scotland, clause 2.1.14 of the non-domestic Technical Handbook expects service penetrations to keep at least the fire resistance duration of the wall or floor, with proprietary products, intumescent ones included, tested for their end use. Where fire-rated sealant is specified, that’s what we install, to the tested detail. A 2-mile radius around Carntyne takes in several hotels. A hotel refit often runs new services through compartment walls between bedrooms and corridors, and each opening needs the specified seal.
For an estates team at a campus like University of Strathclyde, 1 mile north-west of Carntyne, summer M&E works are usually followed by a round of penetration sealing. Tenant changes at centres like The Forge Shopping Centre, 0.6 miles to the south-west of Carntyne, often mean new services through walls between units. For a unit at a site such as Carntyne Industrial Estate, which lies south-east of Carntyne, new power or data runs between office and warehouse can breach a compartment wall.
Carntyne is about 3 miles east of Glasgow, in Glasgow. We send applicators to Carntyne for service penetrations, handled exactly as we handle every other area. Carntyne is one of 171 places in Glasgow on our list for service penetrations.
Business premises anywhere in G33, G32 and G31 are within our area. Among the streets we cover are Rigby Avenue, Penicuik Lane and Grierson Lane. Just outside Carntyne, we also work in Riddrie (1 mile north), Lightburn (1 mile east), Cranhill (1 mile east), Greenfield (1 mile south-east) and Parkhead (1 mile south-west). A short drive away, we cover Glasgow (3 miles west), Hillhead (4 miles west), Dowanhill (5 miles west), Woodlands (4 miles west), Woodside (3 miles west) and North Kelvinside (4 miles west).
Local landmarks in Carntyne
Around Carntyne, our work takes us to commercial buildings near Whitehill Secondary School and Parkhead Library. The nearest railway station is Carntyne station, roughly 0.5 miles south-east. A little further out are Parkhead Hospital (0.6 miles south-west) and Bishop's Castle (1.8 miles west). Green spaces nearby include Hogganfield Loch and Lenzie Moss.
Also in Carntyne
Your questions answered
How do Scotland’s building standards affect fire-rated sealant in Carntyne?
Scotland’s non-domestic Technical Handbook covers it in clause 2.1.14: penetrations keep at least the element’s fire resistance duration, with products tested for their end use. Design sits with the designer and the verifier; installation to the tested detail is our part.
Do you seal service penetrations in hotels around Carntyne?
Yes. We install fire-rated and intumescent sealant where it is specified. We match the product to the wall or floor and the services, and say if something other than sealant is needed.
Do you take on small jobs?
Small jobs are welcome alongside larger packages. Send details for a fixed quote.
What site paperwork can you supply?
Tell us what site paperwork you need (RAMS, insurance certificate, CSCS details) and we’ll confirm with the quote.
How do you choose the sealant?
If the job is specified, we follow the specification. Otherwise, we recommend a product to suit the joint’s movement, the substrate and the conditions, following the manufacturer’s guidance.
Are you CHAS accredited and on Constructionline?
Yes. We are CHAS accredited and a Constructionline member.
Can you work to our specification?
Yes. We follow the specification, along with the manufacturer’s installation guidance, and any queries are raised before we start.
For managing agents and facilities managers
As a CHAS accredited contractor and Constructionline member, we are straightforward to vet for your supplier list. Our insurance certificate can be sent along with the quote.
Main contractors use us as their sealant subcontractor. Programme, specification and site rules come first, and our applicators hold CSCS cards.
On site: what to expect
Before we leave any area, we remove the tape, clean down and inspect every joint, ready for your sign-off. If an area should be left alone while the sealant cures, we say how long and put signs out. Work on a big city site in Scotland usually involves inductions and permits. Pass on the site’s contractor rules when you get in touch.
- First we confirm the product and tested details named in the specification.
- We sort the openings by the detail each one needs.
- Improvised fillers and failed sealant are removed.
- Where the detail needs backing, it goes in at the stated depth.
- We gun the sealant in to the specified depth around each service and tool it.
- We walk the completed areas with you and confirm the records agreed at quote stage.
What we need from you
- Confirm the product named in the specification
- Arrange parking or a loading space
- Send asbestos survey details if the building is pre-2000
Request a quote
Quotes are fixed against the scope you send, so the cost is agreed before work starts. To start the process, phone 01277 525 020 or use the quote form.
Advice
Maintenance after handover
To get the most from the new sealant:
- File the specified details where the next contractor can find them
- Ask which product is in place before decorating
- Settle who seals which penetrations at the start of a project
- Report damaged or disturbed seals as soon as they’re spotted
Don’t patch a fire-rated seal with anything outside its tested detail. Repairs need the same product and detail as the original.
Ask every contractor who works in risers or voids to report openings they create. Small habits like this stop openings building up.
Why act early in Carntyne
An improvised seal can look finished while offering no tested performance. Correcting it means cutting it out and starting again with the specified product, and doing it once, properly, is cheaper. Getting access arranged for a building in Carntyne takes time, so it makes sense to renew every failing joint while it’s in place.
Whether it’s a single area or a whole estate, the same things set the price: scope, access, product and programme. Call for a quote, and you will have a fixed figure to work with.
Why appoint us
- Public liability insurance in place
- Failed material removed, not covered up
- Constructionline member for supplier checks
- Fixed quotes based on photographs, drawings or a visit
When to bring in a specialist
The visible bead is only part of the job. Backing rod, primer where specified and a joint designed to move with the building are where general trades tend to cut corners.
For most general trades, sealant is a sideline. A specialist prepares properly, controls joint depth and picks a product with the right movement class.