Fire stopping in Blochairn
Work needed on a service penetration in Blochairn? We look at it, seal it with the right product and hand it over with a 12-month guarantee.
- Unsealed joints where partitions meet the slab
- Hidden openings found during inspections
- Fire stopping installed outside its tested range
Fire stopping near Blochairn
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
About our fire stopping in Blochairn
It helps to set out our role at the start. Deciding the specification sits with the designer, the fire engineer and building control; sign-off sits with them too. We fit the specified fire-rated sealant following that specification and the maker’s installation guidance on buildings around Blochairn. We work on small duct penetrations where the tested detail allows, linear gaps at wall heads and joints between fire-resisting walls and floors, and what we are called in for most is fire-stopping items raised at inspection or handover and fire seals cut back for extra cables and never reinstated. Most enquiries from Blochairn start with one failed joint and grow into a wider look at the building: we check the joints around it and give you an honest view of what needs doing now and what can wait.
Scotland’s non-domestic Technical Handbook says a service penetration ought to match, as a minimum, how long the wall or floor resists fire. For a building in Blochairn, specified fire-rated sealant is installed as the maker’s tested detail describes.
We stand by our work: 12 months, guaranteed. That covers our preparation and application, and if something we did falls short, we return to it.
- Place
- Blochairn (G31, G21, G58)
- Wider area
- Glasgow
- Guarantee
- 12 months on our workmanship
- Price
- A fixed quote before we start
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
Honest limits
Sealant solves a lot, but not everything, and we are upfront when that’s the case. These need a different solution:
- Fire risk assessments, a job for a competent assessor
- Approving the work on behalf of building control
- Construction that lacks the fire resistance the seal relies on
If you are not sure, just speak to us on 01277 525 020 or email a schedule or drawings and we will give you a straight answer before you book.
Where we work in Blochairn
- Joints between fire-resisting walls and floors
- Service gaps in risers
- Cable penetrations
- Small duct penetrations where the tested detail allows
- Pipe penetrations
- Linear gaps at wall heads
Site staff or a sealant specialist?
Using site staff can make sense for a small touch-up, but larger jobs are different: a specialist brings efficiency, a consistent finish and a 12-month guarantee.
Site maintenance staff can often handle a short internal joint. The usual problems come from preparation: sealing over old material, sealing onto damp or dusty surfaces, or a product that can’t take the movement.
Questions we’re asked in Blochairn
Will you plan work around the academic year at somewhere like University of Strathclyde?
Yes. We plan campus work around teaching, exams and residence turnarounds. Any paperwork you need, from RAMS to our insurance certificate and CSCS details, is confirmed with the quote.
Can you work at a site such as Blochairn Industrial Estate, by Blochairn?
Yes. Estates, retail parks and business parks around Blochairn, Blochairn Industrial Estate among them, are all within reach. Send details of the unit and the work through our quote form for a quick quote.
What will the job cost?
That depends on the job: the volume of work, the access, the specified product and how it’s phased. Call for a fixed quote.
What about RAMS and site documents?
Each site asks for different documents, so tell us what you need and we will confirm it when we quote.
Do you take on multi-site work?
Yes. We take on portfolio and planned maintenance work, planned site by site to suit how each building is used.
Is fire stopping in Scotland covered by different guidance?
Our area runs from Greater London and the South East to every part of Scotland. Scotland’s non-domestic Technical Handbook, clause 2.1.14, expects service penetrations to be fire stopped to at least the wall or floor’s fire resistance.
Can you quote from photographs?
Photos, drawings or a schedule are often enough to quote. If the job needs a look first, we will arrange a visit.
Compartments and services around Blochairn
The area within 2 miles of Blochairn holds a good number of hotels. Hotels are divided into compartments, and refurbishments that add pipes and cables through bedroom and corridor walls leave gaps to close. Scottish guidance (non-domestic Technical Handbook, clause 2.1.14) asks that penetrations match at least the fire resistance period of the element they pass through, using products tested for the way they’re used. We install what’s specified, to the product’s tested detail.
Campus buildings at universities such as University of Strathclyde, 0.6 miles to the east of Blochairn, see constant changes to data and services, and fire-rated sealant goes in around new penetrations where it is specified. For a site team at a college like Glasgow Kelvin College - Springburn Campus, which lies north-west of Blochairn, fire-rated sealing is best scheduled after the summer works. Industrial units on estates such as Blochairn Industrial Estate, less than half a mile to the north-east of Blochairn, often separate offices from warehouse space with fire-resisting walls, and new services through them need the specified seal.
Blochairn is about 2 miles north-east of Glasgow, in Glasgow. Across the G31 postcode area, it works the same way: details in, fixed quote out, then sealing and a 12-month guarantee. Blochairn is one of 171 places we cover in Glasgow for service penetrations.
Postcode districts covered here: G31, G21 and G58. Streets here include Townmill Road, Blochairn Road and Petershill Road. You’ll find Blochairn on or near the M8 and A8. We also cover Old Balornock (1 mile west), Germiston (1 mile north-east), Royston (1 mile west), Dennistoun (1 mile south) and Provanmill (1 mile north-east). Further afield, our area takes in Hillhead (3 miles west), Dowanhill (3 miles west), Partickhill (4 miles west), Yorkhill (3 miles west), Kelvinside (4 miles west) and Hyndland (4 miles west).
Around Blochairn
Around Blochairn, our work takes us to commercial buildings near Andersonian Library and Springburn Park and the streets around them. Blochairn’s nearest station is Alexandra Parade station, roughly 0.5 miles south-east of the centre. Well-known places in the area include Bishop's Castle (0.9 miles south-west) and Glasgow Royal Infirmary Museum (0.8 miles south-west). Open spaces near Blochairn include Lenzie Moss and Hogganfield Loch.
Also near Blochairn
Also in Blochairn
Owners, agents and contractors
CHAS accredited and a Constructionline member, we’re straightforward to vet for your supplier list. We’re fully insured, and our insurance certificate can go with the quote.
FMs need a contractor who is easy to get on site. Let us know the documents you need (RAMS, insurance certificate, CSCS details) and we’ll confirm them with the quote.
On site: what to expect
Our CSCS-carded applicators arrive with the sealants, primers and backing rod the job calls for. Joint faces are cleaned back to sound, dry surfaces, primer goes on where the manufacturer specifies it, and each bead is tooled to a neat concave finish. Give us the access times and building rules for your premises in Blochairn, and we’ll plan the work to suit, phased where areas need to stay in use.
- We ask for the product and detail your designer has specified.
- We sort the openings by the detail each one needs.
- Old or wrong materials are cut out.
- Mineral wool or other backing is fitted where required.
- Fire-rated or intumescent sealant goes in around the services and is tooled off.
- We walk the completed areas with you and confirm the records agreed at quote stage.
Getting the site ready
- Tell staff and tenants when we will be in
- Arrange parking or a loading space
- Send asbestos survey details if the building is pre-2000
Quotes
Send details, get a quote, we seal, guaranteed: that’s how every job runs. To take the first step, ring 01277 525 020 or send details through our quote form.
Read more
Looking after the joints
For the best life from the joints:
- Ask which product is in place before decorating
- Get seals inspected before ceilings and boxing close
- Check risers and ceiling voids after each round of works
- Brief every trade that openings they make must be sealed
Never top up a fire seal with foam, ordinary silicone or filler. A repair should use the original product, installed the same way, or a new specification from the designer.
A simple record of seal locations and products helps. When a new service goes through, everyone knows which product and detail to match.
What affects the price in Blochairn
A fixed quote reflects the actual work. It allows for:
- Working within restricted access windows
- The product specified
- How much existing material needs removing
- How accessible the joints are
Quantities, awkward access and phased working all shape the price. So do site requirements such as inductions and permits.
Details that help us quote
For an accurate fixed quote, we need a clear picture of the site. Send us:
- A wide shot and a close-up of the area
- The product your specification calls for
- Your programme or deadline
- Access details, including height
For a fixed quote, call the office on 01277 525 020 or use the quote form, telling us the site location and the nature of the job. You can also send details through our quote form.