Fire stopping in Blairdardie
Planning work on a service penetration in Blairdardie? We look at it, seal it with the right product and hand it over with a 12-month guarantee.
- Fire seals cut back for extra cables and never reinstated
- Penetration schedules that need working through
- Seals that don’t match their tested detail
Fire stopping near Blairdardie
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Do you need fire stopping in Blairdardie?
Plenty of openings were simply never closed. Inspections, refurbishments and ceiling access normally bring them to light.
It’s worth sending us details if you spot any of the following:
- Snag lists that include open service penetrations
- Expanding foam used as fire stopping
- Service penetrations left open after M&E works
- Unsealed penetrations discovered above suspended ceilings
Shop fits on retail sites such as Great Western Retail Park (0.7 miles west of Blairdardie) can bring new services through fire-resisting walls between units, to be sealed with the specified product.
Comparing quotes
- Their plan for phasing and protecting the area
- What site paperwork they can supply
- Health and safety accreditation such as CHAS
- The terms of the workmanship guarantee
Fire stopping in Blairdardie, done properly
Opened ceilings and riser doors often reveal service openings nobody sealed. Where the walls and floors already have a fire-stopping specification, we can work to it using the product and detail it sets out. Where there isn’t one, the designer or fire engineer needs to set one first. Site teams most often ask us about builders’ foam or ordinary silicone in compartment walls and unsealed joints where partitions meet the slab, on linear gaps at wall heads, small duct penetrations where the tested detail allows and pipe penetrations. A specialist sealant contractor works differently from a general builder: in Blairdardie, that means joint design, primers and backing rod as standard.
In Scotland’s cities, university, hospital and office estates see services added year after year, and each new run of cable or pipe through a compartment wall needs sealing. New openings are closed with the specified fire-rated product, following its test evidence.
Every job is signed off with a 12-month guarantee. The promise is simple: if our work fails within that year, we put it right.
- Place
- Blairdardie (G13, G15, G61)
- Wider area
- Glasgow
- Guarantee
- 12 months on every job
- Price
- A fixed quote before we start
- Call
- 01277 525 020
- Updated
- 3 November 2026
Why it’s worth doing now in Blairdardie
Inspections and handover checks often pick up fire stopping. Late discoveries can delay handover while openings are reopened and resealed. In a Scottish city, access often needs scaffold, permits or factor approval, so deal with all failing joints while access is up.
Whether it’s a single area or a whole estate, the same things set the price: what’s in scope, how we reach it, what’s specified and when it needs doing. Call for a quote, and you will have a fixed figure to work with.
What you get with us
- Products installed to the manufacturer’s instructions
- CHAS accredited
- One number for every site we cover
- Work carried out by CSCS-carded applicators
Take a look at what affects the cost and how we’re accredited.
Doing it in-house
Redoing a failed joint typically costs more than getting it right at the outset, because the whole bead must be removed and the faces cleaned back again. That’s why many clients bring in a specialist from the beginning.
Using site staff can make sense for a small touch-up, but larger jobs are different: a specialist brings efficiency, a consistent finish and a 12-month guarantee.
Fire-rated sealing for Blairdardie buildings
In Scotland, clause 2.1.14 of the non-domestic Technical Handbook expects service penetrations to keep at least the fire resistance duration of the wall or floor, with proprietary products, intumescent ones included, tested for their end use. Where fire-rated sealant is specified, that’s what we install, to the tested detail. Blairdardie has several hotels close by, all within 2 miles. In hotels, bedroom and corridor walls are normally fire-resisting, so services added in a refit need sealing with the specified product.
At a college such as Glasgow Clyde College - Anniesland Campus, 1.8 miles south-east of Blairdardie, checking penetration seals after summer M&E works is good practice. At a healthcare site like Gartnavel Royal Hospital (2 miles south-east of Blairdardie), new services through compartment walls are a constant, and each needs the specified seal.
Blairdardie is about 2 miles south-west of Bearsden, in Glasgow. We cover Blairdardie, and jobs here get the same fixed quote and 12-month guarantee as anywhere else. We work across 171 places in Glasgow, from busy centres to rural villages.
Work on service penetrations is covered throughout G13, G15 and G61, whatever the building. We cover commercial and managed buildings on Mace Road, Fruin Road and Manor Road. Just outside Blairdardie, we also work in Drumchapel (1 mile north-west), Old Drumchapel (1 mile west), Westerton (1 mile north-east), Linnvale (1 mile west) and Drumry (1 mile west). Bigger towns within reach include Glasgow (5 miles south-east), Hillhead (3 miles south-east), Dowanhill (3 miles south-east), Woodlands (4 miles south-east), Woodside (4 miles south-east) and North Kelvinside (3 miles south-east).
Around Blairdardie
In Blairdardie, that means premises near Jordanhill College and Dawsholm Park, among other places. Blairdardie has its own railway station: Drumchapel station. A little further out are Drumchapel Hospital (under half a mile north) and Braehead (1.8 miles south). The countryside around Blairdardie includes Castle Hill and Kilmardinny.
On site: what to expect
Before any cutting starts, the area is protected: masking tape along the joint edges and sheeting over anything nearby. On site, the work typically takes a single visit for a short list of penetrations, or a phased programme for a whole building, and we clear our waste as we work. Work on a big city site in Scotland usually involves inductions and permits. Pass on the site’s contractor rules when you get in touch.
- We read the specification, drawings or penetration schedule you send and ask about anything unclear.
- On site, each opening is checked against the tested detail it is meant to follow.
- Anything that doesn’t belong in the opening, such as expanding foam or general-purpose filler, is removed.
- We fit the backing the detail asks for, to the stated depth.
- Fire-rated or intumescent sealant is gunned in to the specified depth, then tooled.
- Openings that need a collar, wrap, batt or other product are flagged to you rather than filled with sealant.
What we need from you
- Tell staff and tenants when we’ll be in
- Let us know about inductions and permits
- Explain the parking and delivery arrangements
Ask for a quote
Photos, drawings or a schedule of the joints and a fixed quote comes back to you. If the job needs a look first, we’ll arrange a site visit.
Read more
Also near Blairdardie
Other services in Blairdardie
How the job changes by surface
Small ducts
We seal around ducts only within what the tested detail covers. Dampers and ductwork systems themselves are outside our work.
Plastic pipes
Plastic pipes soften and collapse in a fire. Some intumescent sealants are tested on smaller plastic pipes. We confirm material and size first and tell you if sealant isn’t the right product.
Quoting for work in Blairdardie
Sealant work doesn’t have a standard rate, since sites vary so much. What we take into account:
- Joint width, depth and condition
- Location, for remote and island sites
- The total length or number of joints
- Site requirements such as inductions and permits
Access often affects the price as much as the sealing: easy-to-reach joints are quicker than those that need equipment to get to. Mention the access as part of your enquiry.
Details that help us quote
Whether it’s one area or a whole building, the same details help:
- How the joints are reached, and at what height
- Drawings or a marked-up plan, if available
- The type of building and who uses it
- When you need the work done
To get a fixed quote, call 01277 525 020 or email us. You can also send details through our quote form.
Questions about Blairdardie
Do you work in occupied care homes around Blairdardie?
Yes. We agree rooms and times with the manager and work a few areas at a time. Noise and disruption are kept to a minimum.
How do Scotland’s building standards affect fire-rated sealant in Blairdardie?
Under Scotland’s non-domestic Technical Handbook (clause 2.1.14), service penetrations should keep at least the wall or floor’s fire resistance duration, using products tested for their end use. The detail is set by the designer and goes through the warrant process; we install the specified product to its tested detail.
Do you guarantee your work?
Yes. It runs for twelve months and covers how we prepared and sealed the joints, but not damage, misuse or other trades’ work.
What will the job cost?
That depends on the job: quantities, access, the product and any phasing. Call for a quote and we’ll price it properly.
Can you quote from photographs?
Photos, drawings or a schedule are often enough to quote. If the job needs a look first, we will arrange a visit.
Is colour matching possible?
That depends on the product specified. Some ranges are wide, others limited, so we will confirm the colours available for the specified product with the quote.
Will you quote for a small job?
Small jobs are welcome alongside larger packages. Send details for a fixed quote.