Fire Stopping in Moorepark
Sealant work in Moorepark for main contractors, managing agents and facilities managers: fire-rated and intumescent sealing of service penetrations and linear gaps, with a fixed quote first.
- Unsealed joints where partitions meet the slab
- Openings left by services added after handover
- Improvised or mixed-product fire seals
Fire stopping for Moorepark sites
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Owners, agents and contractors
Whether you are a managing agent, a property factor or an owner’s representative: send details, get a fixed quote, we seal, guaranteed. Keys, access and contacts can be agreed in advance.
Blocks and communal areas make up much of the work for housing associations and agents. We phase the work so people keep access, and each stage is agreed with your contact.
Fire stopping for commercial buildings in Moorepark
We should be clear about what we do and don’t do. The designer, fire engineer or building control decides which fire stopping is required. We fit the specified fire-rated sealant following that specification and the maker’s installation guidance on buildings around Moorepark. We work on pipe penetrations, cable penetrations and linear gaps at wall heads, and what we are called in for most is penetration schedules that need working through and non-fire-rated filler around services. Whether you call it commercial sealant work, mastic application or joint sealing, the work in Moorepark is the same: the right product in a properly prepared joint.
Scotland’s non-domestic Technical Handbook says a service penetration ought to match, as a minimum, how long the wall or floor resists fire. For a building in Moorepark, specified fire-rated sealant is installed as the maker’s tested detail describes.
What our 12-month guarantee covers is the way we did the job: the preparation, the sealing and the tooling. Damage, later alterations by others and movement beyond what the joint was designed for sit outside it.
- Place
- Moorepark (G51, G52, G41)
- Region
- Glasgow
- Guarantee
- A 12-month guarantee
- Quote
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Updated
- 3 November 2026
What the job involves on each surface
Linear joints
Head-of-wall gaps, slab edges and wall junctions are linear joints. Their tested detail, under BS EN 1366-4, sets the width, depth, backing and movement allowed and the installation has to fit inside those limits.
Cables and cable bundles
New data and power cables are the most common breach we see. Openings around new cables are resealed to the detail.
Other services in Moorepark
Maintenance after handover
Every sealant joint needs some looking after, and their life depends on movement, exposure, cleaning and use. We suggest:
- Look above ceilings when tiles are lifted for other jobs
- Agree the fire-stopping specification before services go in
- File the specified details where the next contractor can find them
- Put resealing into every M&E and fit-out package
New services after handover are a common way fire stopping gets breached. A short check at the end of each job saves a long hunt later.
Regular walk-rounds of service areas are worth the time. Catching a damaged seal early keeps the fix small.
From enquiry to sign-off
We bring the products specified for the job, along with primers and backing rod. Joint faces are cleaned back to sound, dry surfaces, primer goes on where the manufacturer specifies it, and each bead is tooled to a neat concave finish. University, hospital and office estates in Scotland’s cities have their own permits, inductions and sign-in rules. Pass on the site’s contractor rules when you get in touch.
- The specification and schedule come first, so we know which details apply.
- Access, permits and the order of areas are agreed with the site team.
- Each opening is checked for wall or floor type, service, gap and depth.
- Foam, ordinary sealant and debris come out.
- The specified backing and sealant go in to depth and are finished neatly.
- We tell you about openings that need a different product.
Before we start on site
- Arrange parking or a loading space
- Tell us what induction or permit system the site runs
- Tell staff and tenants when we’ll be in
Getting a fixed quote
To get a fixed quote, phone 01277 525 020 or email us. Our quote form is another easy route.
Read more
What sets the cost
These are the things that shape the price:
- Joint width, depth and condition
- How much existing material needs removing
- Working within restricted access windows
- How much there is to seal
Pricing service penetrations depends on quantities, condition and access, and any specification that applies. Call for a quote.
What to include in your enquiry
We can often quote from photographs and a few details. Please tell us:
- What the building is and how it’s used
- Where the site is, with the postcode
- Rough lengths or quantities, or drawings if you have them
- When you need the work done
The quickest route to a quote is a few photos and the site postcode. Upload them with the quote form, or speak to us on 01277 525 020 or email drawings and photos to discuss it first.
Signs you need fire stopping in Moorepark
Some seals fail because the wrong product went in: builders’ foam or ordinary silicone used to fill a hole. The opening looks sealed but has no fire test evidence behind it and has to be removed.
It’s worth sending us details if you spot any of the following:
- Fire seals cut back for extra cables and never reinstated
- Seals that don’t match their tested detail
- Unsealed joints where partitions meet the slab
- Old intumescent sealant that has split away
At a healthcare site like West Glasgow Ambulatory Care Hospital, which lies north-east of Moorepark, new services through compartment walls are a constant, and each needs the specified seal.
Before you book anyone
- Will CSCS-carded applicators be on site?
- Health and safety accreditation such as CHAS
- Their public liability cover
- How they’ll work around occupants
Your questions answered
How do the Scottish rules apply to fire-rated sealing in Moorepark?
Scotland’s non-domestic Technical Handbook covers it in clause 2.1.14: penetrations keep at least the element’s fire resistance duration, with products tested for their end use. We install what has been specified, to the manufacturer’s tested detail, while design and approval sit with the designer and the verifier.
Can you seal around new services in a hotel near Moorepark?
Yes, to the specification and the product’s tested detail. Work is done room by room so the hotel keeps trading; design and sign-off stay with the designer and building control.
Does the weather affect the work?
It can, for external work. Wet joints and cold, damp or frosty conditions stop the sealant bonding properly, so external work may be moved if conditions aren’t right. Indoors, the weather is rarely a problem.
Can you follow the specification on our project?
Yes. Send it with your enquiry, and the quote will be based on it, flagging anything that needs clarifying.
Can one quote cover more than one building?
Yes. Several buildings can share a single quote, with one point of contact.
Do you have public liability insurance?
Yes. Our insurance certificate can be sent alongside the quote.
Do you guarantee your work?
Yes. Our workmanship is backed for 12 months.
Compartments and services around Moorepark
Scottish guidance (non-domestic Technical Handbook, clause 2.1.14) asks that penetrations match at least the fire resistance period of the element they pass through, and products should be tested for their end use. Our part is installing the specified fire-rated sealant to its tested detail. Plenty of hotels sit less than 2 miles from Moorepark. In hotels, bedroom and corridor walls are normally fire-resisting, so services added in a refit need sealing with the specified product.
At a college such as Glasgow Clyde College - Cardonald Campus (1.4 miles south-west of Moorepark), checking penetration seals after summer M&E works is good practice. Offices at parks like Ibrox Business Park, under half a mile south-east of Moorepark, are re-cabled with each new tenant, and compartment walls need sealing afterwards to the tested detail.
Moorepark is about 1 mile west of Glasgow, in Glasgow. Any commercial site in Moorepark is covered, whether it’s a single job or part of a planned programme. Across Glasgow, 171 places are covered, Moorepark among them.
Anyone looking for fire stopping in G51, G52 and G41 gets the same process as the rest of our area: details, then a fixed price, then sealing and a 12-month guarantee. Buildings on Luss Road, Skene Road and Govan Road are within our area for service penetrations. Close to Moorepark, our area also takes in Ibrox (1 mile south-east), Govan (1 mile north), Bellahouston (1 mile south-east), Craigton (1 mile south-west) and Dumbreck (1 mile south). A short drive away, we cover Calton (3 miles east), Yoker (4 miles north-west), High Ruchill (3 miles north-east), Mount Florida (3 miles south-east), Hillpark (3 miles south) and Townhead (3 miles east).
Around Moorepark
Recent enquiries here include premises near Isabella Elder Rose Garden, St Peter's Boys School and Glasgow University Library. For rail, the closest station is Dumbreck station, roughly 0.9 miles south-east. A little further out are Partick Castle (0.9 miles north) and Glasgow Science Centre (0.7 miles east). Green spaces nearby include Kilmardinny.