Fire Stopping in Arden
We carry out fire-rated and intumescent sealing of service penetrations and linear gaps in Arden and the surrounding area. Send details for a fixed quote.
- Fire seals cut back for extra cables and never reinstated
- Improvised or mixed-product fire seals
- Fire-stopping items raised at inspection or handover
Fire stopping for businesses in Arden
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Fire-rated sealing for Arden buildings
A 2-mile radius around Arden takes in several hotels. Bedroom-to-corridor walls in hotels are normally fire-resisting, so new cabling or pipework through them has to be sealed to the tested detail. Scotland has its own building standards: the non-domestic Technical Handbook (clause 2.1.14) says service penetrations should be fire stopped to at least the fire resistance duration of the wall or floor, with products tested for that end use. Our part is installing the specified fire-rated sealant to its tested detail.
Where a unit on an estate such as Thornliebank Industrial Estate, under half a mile south-east of Arden, has fire-resisting walls between offices and warehouse, any new service through them should be sealed to the tested detail. Tenant changes at centres like Silverburn Shopping Centre, 1 mile north of Arden, often mean new services through walls between units.
Arden is about 2 miles north-west of Giffnock, in Glasgow. We cover Arden, with the same fixed quotes and 12-month guarantee as everywhere else. We work across 171 places in Glasgow, large and small.
Commercial sites across G46, G53 and G43 are covered for service penetrations. Among the streets we cover are Skibo Lane, Kilmuir Road and Hopeman Road, and sites on any of them can send details for a fixed quote. If your building is just outside Arden, we cover Carnwadric (1 mile east), Kennishead (1 mile north-east), Southpark Village (1 mile south-west), Darnley (1 mile west) and Thornliebank (1 mile south-east). Further afield, our area takes in Glasgow (4 miles north-east), Hillhead (5 miles north), Dowanhill (5 miles north), Woodlands (5 miles north-east), Woodside (5 miles north-east) and North Kelvinside (5 miles north-east).
Near you in Arden
In Arden, that means premises near Rouken Glen. There’s a railway station in Arden itself: Kennishead station. Well-known places in the area include Silverburn Shopping Centre (1 mile north) and Pollock Castle (2 miles south-west). The countryside around Arden includes Neilston Pad and Brother Loch.
Fire stopping for commercial buildings in Arden
We are commercial sealant applicators, CHAS accredited and a Constructionline member, with CSCS-carded applicators on site. We hold no third-party fire-stopping installer certificate. We install the specified fire-rated sealant to its tested detail, and our workmanship carries a 12-month guarantee. If you are dealing with unsealed openings around new pipes and cables and seals disturbed by maintenance and left open, we can put it right, on joints between fire-resisting walls and floors, linear gaps at wall heads and pipe penetrations alike. Searching for sealant specialists in Arden? We have been sealing commercial buildings since 2005.
Scotland’s non-domestic Technical Handbook says a service penetration ought to match, as a minimum, how long the wall or floor resists fire. For a building in Arden, specified fire-rated sealant is installed as the maker’s tested detail describes.
We stand by our work with a 12-month guarantee. It covers how we prepared and applied the sealant.
- Location
- Arden (G46, G53, G43)
- Wider area
- Glasgow
- Cover
- A 12-month guarantee
- Quote
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
More services for Arden
Different surfaces, different methods
Plastic pipes
Waste and drainage pipes through floors are a frequent case. Whether sealant alone is acceptable depends entirely on the tested detail.
Small ducts
Some fire-rated sealant details cover small ducts. Larger or fire-rated ductwork normally needs a different solution set by the designer and we flag that rather than guess.
What sealant work can’t fix
Some faults sit outside our scope, and we say so rather than covering them up:
- Signing off or certifying a building’s fire stopping
- Openings that need collars, wraps, batts or boards rather than sealant
- Fire doors, dampers or other fire safety equipment
If in doubt, give us a call on 01277 525 020 or email us and we’ll say what we think.
Where we work in Arden
- Joints between fire-resisting walls and floors
- Cable penetrations
- Pipe penetrations
- Service gaps in risers
- Small duct penetrations where the tested detail allows
- Linear gaps at wall heads
Building owners, agents and FMs in Arden
Housing associations and managing agents often need work done across blocks and communal areas. We phase the work so people keep access, and each stage is agreed with your contact.
Agents, factors and owners’ representatives all follow the same route: send details, get a fixed quote, we seal, guaranteed. Keys, access and contacts can be agreed in advance.
Aftercare for building managers
Every sealant joint needs some looking after, and their life depends on movement, exposure, cleaning and use. We suggest:
- Treat an open penetration as a priority repair
- Have penetrations checked while they can still be seen
- Keep general-purpose fillers away from compartment walls
- Keep product data and details in the fire safety file
After the work, brief anyone else working in the area that the openings are now sealed. If a seal has to be opened for a new service, it should be reinstated to the same detail.
A simple record of seal locations and products helps. When a new service goes through, everyone knows which product and detail to match, which saves guesswork.
From enquiry to sign-off
We schedule the visit to fit the site hours and access windows you give us. On the day, the work area is kept contained and tidy, and we check in with your contact before moving on to each new area. University, hospital and office estates in Scotland’s cities have their own permits, inductions and sign-in rules. Pass on the site’s contractor rules when you get in touch.
- First we confirm the product and tested details named in the specification.
- Openings are measured and grouped by detail.
- Improvised fillers and failed sealant are removed.
- Where the detail needs backing, it goes in at the stated depth.
- Fire-rated or intumescent sealant goes in around the services and is tooled off.
- Completed areas are checked with you, with the records agreed when we quoted.
Before we start on site
- Point out parking and an unloading spot
- Move anything stored against the joints
- Let building users know which areas are affected
Getting a fixed quote
A handful of photos and a postcode is the fastest way to a quote. Send them through the quote form, or phone 01277 525 020 or email the details over if you’d rather talk the job through.
Related advice
Common questions from Arden clients
Does your area include sites such as Thornliebank Industrial Estate, near Arden?
Yes. We cover Arden and the area around it, including industrial estates, business parks and retail parks such as Thornliebank Industrial Estate. Photos and a short description are enough for a first look.
What do Scotland’s building standards say about service penetrations in Arden?
Under Scotland’s non-domestic Technical Handbook (clause 2.1.14), service penetrations should keep at least the wall or floor’s fire resistance duration, using products tested for their end use. We install what has been specified, to the manufacturer’s tested detail, while design and approval sit with the designer and the verifier.
Will you quote for a small job?
Small jobs are welcome alongside larger packages. Photos and a description are enough to start.
Can you quote from photos?
Many jobs can be quoted from photographs, drawings or a joint schedule. Where they aren’t, we arrange a site visit before quoting.
Are you insured?
Yes. Our insurance certificate can be sent alongside the quote.
Is the work guaranteed?
Yes. The 12-month guarantee covers our preparation and application, but not damage, misuse or other trades’ work.
Can you work to our specification?
Yes. Send it with your enquiry, and the quote will be based on it, flagging anything that needs clarifying.
Signs you need fire stopping in Arden
Head-of-wall joints and wall-to-wall junctions are frequent weak points. Movement in the frame or slab can open the joint. Linear joint details set a width range and movement capability, and the seal has to sit within them.
Clients normally get in touch after noticing one or more of the following:
- Improvised or mixed-product fire seals
- Fire sealant pulled out of the opening
- Penetration schedules that need working through
- Fire seals cut back for extra cables and never reinstated
Wherever services are added at a hospital such as Leverndale Hospital (to the north-west of Arden) the compartment line has to be made good with the specified product.
Comparing quotes
- Will RAMS and insurance details be available?
- Their plan for phasing and protecting the area
- Health and safety accreditation such as CHAS
- The terms of the workmanship guarantee