The Mastic Doctor team standing beside their branded vans outside an office building
Glasgow · Scotland

Maryhill fire stopping

Fire-rated and intumescent sealing of service penetrations and linear gaps in Maryhill. CHAS accredited and fully insured, with a 12-month guarantee.

  • Head-of-wall gaps with no fire seal
  • Fire stopping installed outside its tested range
  • Service penetrations left open after M&E works
1
Send details
Drawings, photos, a joint schedule or a site visit.
2
Get a quote
One fixed quote covering the agreed scope.
3
We seal
The right sealant, to the right depth, neatly finished.
4
Guaranteed
Signed off, with 12 months’ guarantee.
South East, London & Scotland
CHAS & Constructionline
Fully insured: £5m PL

Fire stopping across Maryhill

Photos, a specification or a quick description of the joints is enough to start a fixed quote.

What we can’t put right

Our job is the joint, not everything around it. Sealant alone won’t deal with:

  • Reviewing a building’s overall fire safety
  • Gaps in walls that were never built as compartment walls
  • Signing off or certifying a building’s fire stopping

If you are not sure, just ring 01277 525 020 or email the details over and we will give you a straight answer before you book.

What we seal

  • Cable penetrations
  • Pipe penetrations
  • Service gaps in risers
  • Joints between fire-resisting walls and floors
  • Linear gaps at wall heads
  • Small duct penetrations where the tested detail allows

Fire stopping in Maryhill

No fire sealant works on its own: the evidence covers a specific product, wall or floor type, service, gap, depth and backing. We match each opening to that detail before any sealant goes in. We work on cable penetrations, joints between fire-resisting walls and floors and service gaps in risers, and what we’re called in for most is head-of-wall gaps with no fire seal and builders’ foam or ordinary silicone in compartment walls. A single leaking joint is often how a building in Maryhill first comes to us: we check the joints around it and give you an honest view of what needs doing now and what can wait.

Scotland’s non-domestic Technical Handbook says a service penetration ought to match, as a minimum, how long the wall or floor resists fire. For a building in Maryhill, specified fire-rated sealant is installed as the maker’s tested detail describes.

We stand behind the joints we seal with a 12-month guarantee. It covers how we prepared and applied the sealant, and we come back if anything isn’t right.

The Mastic Doctor team beside their liveried vans in front of an office building
Place
Maryhill (G20, G12, G23)
Wider area
Glasgow
Guarantee
12 months on our workmanship
Price
Fixed quote, scope in writing
Phone
01277 525 020
Last updated
3 November 2026

Why it’s worth doing now in Maryhill

The longer openings stay, the more there tend to be: each new service adds to the list. Keeping on top of it after each round of works keeps the job small. In Maryhill, as across Scotland, rain finds any gap, so a split or hardened joint lets water into the wall. Resealing promptly protects the stone and the interior.

Larger quantities, tricky access or phasing all shape the price. Site requirements like inductions and permits play a part as well, along with the time of year for external work.

Why us?

  • One phone line for London, the South East and Scotland
  • Work carried out by CSCS-carded applicators
  • A fixed quote before work starts
  • Work to your specification and the manufacturer’s guidance

Take a look at what affects the cost and our accreditations.

Fire stopping in Maryhill: the local picture

The 2 miles around Maryhill include three care or nursing homes. Care settings depend on compartmentation, so service penetrations made during maintenance or refurbishment need sealing with the specified product. Where that’s fire-rated sealant, we install it to the manufacturer’s tested detail. Under the Scottish non-domestic Technical Handbook, clause 2.1.14, penetrations should be fire stopped to at least the wall or floor’s fire resistance duration, with proprietary products, intumescent ones included, tested for their end use. Our part is installing the specified fire-rated sealant to its tested detail.

Tenant changes at centres like West End Retail Park, 1.6 miles to the south-west of Maryhill, often mean new services through walls between units. Large healthcare estates like Nuffield Health Glasgow Hospital (0.8 miles south-west of Maryhill) change their services often, so penetration seals are worth checking after M&E work. For an estates team at a campus like University of Glasgow Garscube Campus, 1 mile north-west of Maryhill, summer M&E works are normally followed by a round of penetration sealing.

Maryhill is about 2 miles south-east of Bearsden, in Glasgow. Looking for fire stopping in Maryhill? We can help. Maryhill is one of 171 places in Glasgow on our list.

If you need fire stopping in G20, G12 and G23, the process matches everywhere else we work: send details, get a quote, we seal, guaranteed. Streets here include Cowal Road, Cadder Road and Station Road, and sites on any of them can send details for a fixed quote. Main routes into Maryhill include the A81, which helps when planning parking and deliveries for the job. Sites close to Maryhill are covered too, including Botany (1 mile south), Wyndford (1 mile south), Gilshochill (1 mile east), High Ruchill (1 mile south-east) and Cadder (1 mile east). Further afield, our area takes in Glasgow (3 miles south), Calton (4 miles south-east), Langside (5 miles south), Yoker (3 miles west), Mount Florida (5 miles south) and Hillpark (6 miles south).

Local landmarks in Maryhill

Locally, jobs take us to sites close to Dawsholm Park, The Crosslands pub and Glasgow University Library, among other places. There’s a railway station in Maryhill itself: Summerston station. Other landmarks nearby include Glasgow Museum of Transport (1.8 miles south) and Chinatown (2.1 miles south-east). Open spaces near Maryhill include Castle Hill and Kilmardinny.

Map of Maryhill © OpenStreetMap contributors

Building owners, agents and FMs in Maryhill

Main contractors use us as their sealant subcontractor. Programme, specification and site rules come first, and our applicators hold CSCS cards.

Agents, factors and owners’ representatives all follow the same route: send details, get a fixed quote, we seal, guaranteed. We can agree access arrangements and keyholder contacts beforehand.

Maintenance after handover

Problems stay small when the joints are checked regularly. In particular:

  • Report damaged or disturbed seals as soon as they’re spotted
  • Look above ceilings when tiles are lifted for other jobs
  • Agree the fire-stopping specification before services go in
  • Arrange inspection before areas are covered up

Add risers, plant rooms and ceiling voids to routine fire-stopping checks. Look for cracks, unsealed new cables and gaps that have been enlarged, and report them promptly.

On fit-outs, get the fire-stopping specification agreed before the services go in. Details can then be picked to suit the actual pipes, cables and ducts, and installation follows the programme.

Different surfaces, different methods

Risers and ceiling voids

Voids hide a lot of unsealed openings. We work through the areas on your schedule methodically and tell you about openings outside the list.

Drylining partitions

Holes in board are often cut larger than needed. If the gap exceeds the tested range, sealant alone won’t do.

From enquiry to sign-off

At the end of each section, we remove the tape, clean down and inspect every joint with your site contact. Where the sealant needs time to cure before use, we tell you and sign the area. Give us the access times and building rules for your premises in Maryhill, and we’ll plan the work to suit, phased where areas need to stay in use.

  1. We start with your penetration schedule, drawings or specification.
  2. Access, permits and the order of areas are agreed with the site team.
  3. We compare every service penetration with its tested detail before sealing.
  4. Foam, ordinary sealant and debris come out first.
  5. Backing and fire-rated sealant are installed to the detail and tooled.
  6. We tell you about openings that need a different product.

Before we start on site

  • Share your working hours and any access restrictions
  • Tell us what induction or permit system the site runs
  • Let building users know which areas are affected

Ask for a quote

Tell us about the building, the joints and when you need the work done, and a fixed quote will follow. To get it moving, give us a call on 01277 525 020 or email us.

Ask for a quote

Related advice

FAQs: Maryhill

Can work in a care setting near Maryhill go ahead while residents are there?

Yes. We work around residents’ routines, a room or two at a time. We follow the home’s own procedures throughout.

Can you seal around new services in a hotel near Maryhill?

Yes, where the specification calls for fire-rated sealant. It goes in to the manufacturer’s tested detail for the wall or floor and the services passing through, and we’ll tell you if the detail calls for a collar, wrap or batt instead.

Can one quote cover more than one building?

Yes. Multi-site work and planned programmes are a core part of the service, with each site phased to suit its occupants.

Do you offer coloured sealant?

It depends on the product. Some ranges are wide, others limited, so we’ll confirm the colours available for the specified product with the quote.

Are you insured?

Yes. We’re fully insured, and the certificate can go with your quote.

Are you CHAS accredited and on Constructionline?

Yes. We are CHAS accredited, we are a Constructionline member and we use CSCS-carded applicators.

Does weather matter for sealant work?

It can, when the joints are outside. Sealant won’t bond properly to a wet or frosty joint, so we watch the forecast and rearrange outside work if we have to. Internal work is far less affected.

Accreditations

Trusted. Accredited. Insured.