Fire-rated sealing and fire stopping in Parkhouse, Glasgow
Our CSCS-carded applicators take on fire-rated and intumescent sealing of service penetrations and linear gaps in Parkhouse and the surrounding area. Send photographs or drawings for a fixed quote.
- Unsealed penetrations discovered above suspended ceilings
- Damaged fire seals in risers and voids
- Openings left by services added after handover
Fire stopping for Parkhouse sites
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
From enquiry to sign-off
The first thing on site is a walk round with your contact, agreeing which joints are in scope, where to start and what must stay open. After that, any old or failed material is removed, each joint is prepared and the new sealant goes in. City jobs in Parkhouse typically need parking and loading planned. Tenement closes, shared stairs and factor approvals may also be involved.
- We read the specification, drawings or penetration schedule you send.
- Every penetration is compared with its detail: wall or floor type, service, gap size and depth.
- Anything that doesn’t belong in the opening, such as expanding foam or general-purpose filler, is removed.
- Mineral wool or other backing goes in wherever the detail asks.
- We apply the specified sealant to the depth and around the services as the detail shows.
- Openings that need a collar, wrap, batt or other product are flagged to you rather than filled with sealant.
Before we start on site
- Explain the parking and delivery arrangements
- Tell us your opening times and when work is allowed
- Send asbestos survey details if the building is pre-2000
Ask for a quote
To get a fixed quote, call 01277 525 020 or email the details over, telling us the site location and the nature of the job. Our quote form is another easy route.
Advice
Fire stopping for commercial buildings in Parkhouse
On a fit-out or refurbishment, we follow the services contractors floor by floor. We work from your penetration schedule or marked-up drawings. Tell us what records you need and we’ll confirm with the quote. Site teams most often ask us about non-fire-rated filler around services and openings left by services added after handover, across joints between fire-resisting walls and floors, service gaps in risers and cable penetrations. Looking for mastic applicators who cover Parkhouse? We have been sealing commercial buildings since 2005.
In Scotland’s cities, university, hospital and office estates see services added year after year, and each new run of cable or pipe through a compartment wall needs sealing. Intumescent sealant goes in where the specification calls for it, with backing and depth as tested.
We stand behind the joints we seal: 12 months, guaranteed. It covers how we prepared and applied the sealant, and if something we did falls short, we return to it.
- Place
- Parkhouse (G53, G78)
- Wider area
- Glasgow
- Guarantee
- 12 months on our workmanship
- Quotes
- A fixed quote before we start
- Call
- 01277 525 020
- Page updated
- 3 November 2026
Site staff or a sealant specialist?
For a quick touch-up, site staff may be fine, but larger jobs are different: a specialist works through quantities efficiently, leaves a consistent finish and backs it with a 12-month guarantee.
Some joints are best left to specialists: for example fire-rated seals that must match a tested detail, trafficked floor joints and external movement joints. Getting these wrong usually costs more in the end than doing them right.
Also near Parkhouse
Also in Parkhouse
Surface by surface
Metal pipes
Copper and steel pipes are a common service penetration for fire-rated sealant. The tested detail sets the pipe size range, gap, depth and whether insulation can stay on, so we check each one.
Cables and cable bundles
New data and power cables are the most common breach we see. Openings around new cables are resealed to the detail, and we tell you if the bundle exceeds what sealant covers.
Keeping the joints sound
A few simple habits keep the new joints working:
- Ask which product is in place before decorating
- Arrange inspection before areas are covered up
- Ask the designer to confirm details early on refits
- Treat an open penetration as a priority repair
Keep the product data and installation details with the building’s fire safety information. Anyone resealing later needs to know which product and detail were used.
Regular walk-rounds of service areas are worth the time. Catching a damaged seal early keeps the fix small.
What we can’t put right
Sealant solves a lot, but not everything, and we’d rather tell you before you spend money. These need a different solution:
- Approving the work on behalf of building control
- Deciding what a wall or floor needs, which belongs to the designer
- Construction that lacks the fire resistance the seal relies on
Not sure which it is? You can give us a call on 01277 525 020 or email a schedule or drawings and we’ll tell you honestly before you book.
Joints and surfaces we work on
- Small duct penetrations where the tested detail allows
- Cable penetrations
- Linear gaps at wall heads
- Service gaps in risers
- Joints between fire-resisting walls and floors
- Pipe penetrations
Common questions from Parkhouse clients
Can work at a site such as Glasgow Clyde College - Cardonald Campus fit around teaching?
Yes. We plan campus work around teaching, exams and residence turnarounds. Let us know which documents your site asks for, and we’ll confirm them alongside the quote.
Can you work in a care home near Parkhouse with residents in?
Yes. We work around residents’ routines, a room or two at a time. Noise and disruption are kept to a minimum.
Do you cover Parkhouse?
Yes. We take on work across Parkhouse, with one number for every area we cover.
Do you have third-party installer accreditation for fire stopping?
No, and we’d rather be clear about that. Some clients require third-party installer schemes even though the law doesn’t, so it’s worth checking what your contract says. Where it isn’t required, we install the specified sealant to the maker’s details.
When can the area be used after sealing?
That comes down to the sealant and the temperature. Some products skin over quickly but need longer to cure fully, so we’ll confirm the curing time on the day.
What do BS EN 1366-3 and BS EN 13501-2 mean?
The tests are BS EN 1366-3 for penetrations and BS EN 1366-4 for linear joints, and classification is to BS EN 13501-2. An EI 60 seal kept its integrity and insulation for 60 minutes as tested.
Does the weather affect the work?
Outside, yes. The joint has to be dry and within the product’s temperature range, so damp, frosty or very cold days can stop external work. Internal work is rarely affected.
What we are called out for in Parkhouse
Some service penetrations were never sealed at all because they sat out of sight above a ceiling or inside a riser. They come to light during inspections, refits or when another trade lifts a tile.
Things that usually lead to an enquiry:
- Service penetrations left open after M&E works
- Fire stopping installed outside its tested range
- Builders’ foam or ordinary silicone in compartment walls
- Fire sealant pulled out of the opening
For a site team at a college like Glasgow Clyde College - Cardonald Campus, 2.6 miles north of Parkhouse, fire-rated sealing is best scheduled after the summer works.
Questions to ask before you book
- How they handle RAMS and site documents
- Their public liability cover
- Their pre-qualification and accreditations
- Which product they’ll use, and why it suits the joint
Fire stopping around Parkhouse: points for this area
In Scotland, clause 2.1.14 of the non-domestic Technical Handbook expects service penetrations to keep at least the fire resistance duration of the wall or floor, and products should be tested for their end use. We install fire-rated sealant to that tested detail where it is specified. Parkhouse has two care or nursing homes no more than 2 miles away. In a care home, any new pipe or cable through a fire-resisting wall should be sealed to the specified detail. We install fire-rated sealant to the tested detail where it is specified.
On a hospital site such as Leverndale Hospital, 2.1 miles north of Parkhouse, fire-rated sealant goes in where the specification calls for it, with the work planned around the estates team’s permits. Schools such as Barrhead High School often have new data and services installed during holidays, and penetrations through fire-resisting walls should be checked afterwards.
Parkhouse is about 1 mile east of Barrhead, in Glasgow. Our applicators travel to Parkhouse for work on service penetrations. Our Glasgow coverage takes in 171 places, large and small.
Business premises anywhere in G53 and G78 are within our area. Buildings on Whithope Road, Corselet Road and Waukglen Road are within our area. Nearby places we also cover include South Nitshill (1 mile north), Darnley (1 mile north-east), Southpark Village (1 mile east), Nitshill (1 mile south-west) and Priesthill (1 mile north) for service penetrations. A short drive away, we cover Glasgow (5 miles north-east), Hillhead (6 miles north-east), Dowanhill (5 miles north-east), Woodlands (6 miles north-east), Woodside (6 miles north-east) and North Kelvinside (6 miles north-east).
Local landmarks in Parkhouse
We work on buildings around Rouken Glen, among other places. The nearest railway station is Nitshill station, about 0.5 miles north of the centre. Well-known places in the area include Silverburn Shopping Centre (1.4 miles north-east) and Pollock Castle (1.5 miles south). The countryside around Parkhouse includes Neilston Pad and Brother Loch.