Fire stopping in Kelvindale
Fire-rated and intumescent sealing of service penetrations and linear gaps across Kelvindale, carried out by CSCS-carded applicators. Fully insured and CHAS accredited.
- Hidden openings found during inspections
- Fire sealant pulled out of the opening
- Fire stopping installed outside its tested range
Fire stopping for Kelvindale sites
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Cost factors for service penetrations
There’s no standard rate for sealant work, since sites vary so much. What we look at:
- Which sealant the job calls for
- Access and working height
- Distance, for remote addresses
- The total length or number of joints
Quantities, awkward access and phased working all shape the price. Site requirements like inductions and permits play a part as well.
Details that help us quote
Diagnosis starts before we arrive. Let us know:
- Photos of the joints, close up and from further back
- The product your specification calls for
- How the joints are reached, and at what height
- Approximate linear metres or a joint schedule
Let us know the site, the scope and your timescale, and a fixed quote will follow. The easiest way is to call the office on 01277 525 020 or email drawings and photos.
Fire stopping in Kelvindale, done properly
We are commercial sealant applicators, CHAS accredited and a Constructionline member, with CSCS-carded applicators on site. We hold no third-party fire-stopping installer certificate. What we offer is careful installation of the specified sealant to its tested detail, with a 12-month guarantee on our workmanship. If you have fire stopping installed outside its tested range and unsealed penetrations discovered above suspended ceilings, we can help, whatever the surface. Sealant contractors, mastic applicators, sealant specialists: whatever the job title on the order, the work in Kelvindale is the same: failed joints cut out, faces prepared and the right sealant laid to the right depth.
Scotland’s non-domestic Technical Handbook says a service penetration ought to match, as a minimum, how long the wall or floor resists fire. In Kelvindale, penetrations get the fire-rated sealant the specification asks for, built to its tested arrangement.
Every job we finish is backed by a 12-month workmanship guarantee, wherever the site is. If a joint we sealed fails because of how it was installed, we come back and put it right.
- Location
- Kelvindale (G12, G20, G13)
- Region
- Glasgow
- Guarantee
- A 12-month guarantee
- Quotes
- Quoted before any work starts
- Phone
- 01277 525 020
- Updated
- 3 November 2026
Questions about Kelvindale
What do Scotland’s building standards say about service penetrations in Kelvindale?
The non-domestic Technical Handbook, clause 2.1.14, expects a penetration to keep at least the wall or floor’s fire resistance period, with proprietary products tested for the use they’re put to. Design sits with the designer and the verifier; installation to the tested detail is our part.
Could you schedule work at a campus like University of Glasgow Garscube Campus for the vacation?
Yes. Education sites normally want the work in vacations or in phases during term, and we plan to suit. Tell us which site documents you need, such as RAMS, our insurance certificate or CSCS details, and they’re confirmed with the quote.
Is colour matching possible?
In many cases, yes. Many products come in a range of standard colours, and matching to RAL references or surrounding finishes is often possible. We confirm what’s available for the specified product when we quote.
How do I request a quote?
The quote form is the simplest route, though you can also call the office on 01277 525 020 or use the quote form. Include photographs or drawings if you have them.
Can you fit around our working hours?
Mention the site’s hours and access windows in your enquiry, and we’ll schedule the work to suit. You can reach the office between 8am and 5pm, Monday to Friday.
How soon can the area be used again?
Curing time varies by product, and we confirm it on the day.
Can you work to our specification?
Yes. We follow the specification, along with the manufacturer’s installation guidance, and any queries are raised before we start.
Different surfaces, different methods
Cables and cable bundles
Cable penetrations are frequently sealed with fire-rated sealant where the detail allows. Bundle size, cable type and the space between cables all matter.
Linear joints
Head-of-wall gaps, slab edges and wall junctions are linear joints. BS EN 1366-4 testing sets the joint widths, depths, backing and movement a seal covers, and we work within it.
Also near Kelvindale
More services for Kelvindale
From enquiry to sign-off
Our CSCS-carded applicators arrive with the sealants, primers and backing rod the job calls for. Any old material is cut back to clean, sound faces, the manufacturer’s primer is applied where it’s called for, and each bead is tooled to a neat concave finish. Work on a big city site in Scotland typically involves inductions and permits. Pass on the site’s contractor rules when you get in touch.
- We read the specification, drawings or penetration schedule you send and raise any questions before we price.
- Every penetration is compared with its detail: wall or floor type, service, gap size and depth.
- Anything that doesn’t belong in the opening, such as expanding foam or general-purpose filler, is removed.
- Mineral wool or other backing goes in wherever the detail asks.
- We apply the specified sealant to the depth and around the services as the detail shows.
- Openings that need a collar, wrap, batt or other product are flagged to you rather than filled with sealant.
Preparing the site
- Confirm the product named in the specification
- Share your working hours and any access restrictions
- Let us know about inductions and permits
Getting a fixed quote
To get a fixed quote, call the office on 01277 525 020 or send photos by email with the site address and an outline of the work. Our quote form is another easy route.
Advice
Compartment walls and floors in Kelvindale
In Scotland, clause 2.1.14 of the non-domestic Technical Handbook expects service penetrations to keep at least the fire resistance duration of the wall or floor, and products should be tested for their end use. Our part is installing the specified fire-rated sealant to its tested detail. Three care or nursing homes sit less than 2 miles from Kelvindale. In a care home, any new pipe or cable through a fire-resisting wall should be sealed to the specified detail.
Tenant changes at centres like West End Retail Park (1.2 miles south of Kelvindale) often mean new services through walls between units. Wherever services are added at a hospital such as Nuffield Health Glasgow Hospital (to the south-east of Kelvindale) the compartment line has to be made good with the specified product.
Kelvindale is about 2 miles south of Bearsden, in Glasgow. Our applicators travel to Kelvindale for work on service penetrations, handled exactly as we handle every other area. Kelvindale is one of 171 places we cover in Glasgow for service penetrations.
We cover the G12, G20 and G13 postcode districts for service penetrations. We cover commercial and managed buildings on Cowal Road, Foulis Lane and Temple Road and the roads nearby. Nearby places we also cover include Kelvinside (1 mile south-east), Dawsholm (1 mile north), Anniesland Cross (1 mile west), Temple (1 mile west) and Hyndland (1 mile south) for service penetrations. Bigger towns within reach include Glasgow (3 miles south-east), Calton (4 miles south-east), Blythswood Hill (3 miles south-east), Langside (5 miles south), Yoker (3 miles west) and Mount Florida (5 miles south-east).
Landmarks near Kelvindale
We work on buildings around Glasgow University Library, The Esquire House and Dawsholm Park, among other places. Kelvindale has its own railway station: Kelvindale station. Other landmarks nearby include Gartnavel General Hospital (0.5 miles south) and Glasgow Museum of Transport (1.6 miles south). Open spaces near Kelvindale include Kilmardinny and Castle Hill.
When to call us in Kelvindale
Some service penetrations were never sealed at all. They come to light during inspections, refits or when another trade lifts a tile.
If one of these sounds familiar, it’s time for a closer look:
- Openings found when ceilings come down for a refit
- Openings left by services added after handover
- Expanding foam used as fire stopping
- Seals that don’t match their tested detail
Where a unit on an estate such as Dalsholm Industrial Estate, which lies north of Kelvindale, has fire-resisting walls between offices and warehouse, any new service through them should be sealed to the tested detail.
What your quote should include
- Whether old or failed sealant will be cut out, not overlaid
- What the guarantee covers, and for how long
- Do they follow the manufacturer’s priming guidance?
- Whether their applicators hold CSCS cards
What sealant work can’t fix
We check first that sealant really is the fix. It won’t put right:
- Signing off or certifying a building’s fire stopping
- Designing or specifying fire stopping, which sits with the designer or fire engineer
- Plastic pipes whose detail calls for a collar or wrap
If you’re not sure, just speak to us on 01277 525 020 or email the details over and we will give you a straight answer.
What we seal
- Service gaps in risers
- Small duct penetrations where the tested detail allows
- Cable penetrations
- Joints between fire-resisting walls and floors
- Linear gaps at wall heads
- Pipe penetrations
Why deal with it now?
It is cheaper to seal service penetrations as each services package finishes than to come back for them later. Openings are visible, access is open and nothing has to be taken down. In a tenement or shared city building, water from a failed joint can reach other owners’ property, which makes early repair simpler for everyone. Acting early avoids disputes and bigger repairs.
We don’t publish prices, since every building and every scope is different. Call for a quote and we’ll price your job on its own details.
Why choose Mastic Doctor in Kelvindale
- Joints cleaned back to sound surfaces
- Health and safety: CHAS accredited
- One phone line for London, the South East and Scotland
- 12-month guarantee on workmanship
Read our cost guide or how we’re accredited.