Fire stopping in Gilshochill
Fire stopping for Gilshochill, from a contractor working since 2005. Fully insured and CHAS accredited.
- Snag lists that include open service penetrations
- Unsealed joints where partitions meet the slab
- Improvised or mixed-product fire seals
Fire stopping for businesses in Gilshochill
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Fire stopping in Gilshochill, done properly
Sealant is the specified answer for plenty of openings, such as metal pipes, cables and some small ducts where the detail covers them. Other openings need collars, wraps, batts, pillows or boards. If the detail calls for something other than sealant, we say so rather than force sealant into it. If you have penetration schedules that need working through and openings left by services added after handover, we can help, on cable penetrations, small duct penetrations where the tested detail allows and pipe penetrations alike. A single leaking joint is often how a building in Gilshochill first comes to us: we look at the rest while we’re there and tell you what we find.
Large city estates in Scotland, from universities to hospitals and offices, are re-serviced constantly, and each new run of cable or pipe through a compartment wall needs sealing. Intumescent sealant goes in where the specification calls for it, with backing and depth as tested.
The 12-month guarantee covers our workmanship: preparation, application and finish. It doesn’t extend to damage, other trades’ later work or movement the joint was never designed to take.
- Location
- Gilshochill (G20, G23, G22)
- Region
- Glasgow
- Cover
- 12 months on our workmanship
- Price
- A fixed quote before we start
- Phone
- 01277 525 020
- Last updated
- 3 November 2026
Building owners, agents and FMs in Gilshochill
Planned maintenance programmes are welcome: working through a building or an estate in stages that fit your budget. Gilshochill can form part of a wider programme across Glasgow.
Agents, factors and owners’ representatives all follow the same route: send the details, accept a fixed quote, and we carry out and guarantee the work. Keys, access and contacts can be agreed in advance.
Your questions answered
Could you schedule work at a campus like University of Glasgow Garscube Campus for the vacation?
Yes. We plan campus work around teaching, exams and residence turnarounds. Tell us which site documents you need, such as RAMS, our insurance certificate or CSCS details, and they’re confirmed with the quote.
Is Balmore Industrial Estate, near Gilshochill, within your area?
Yes. We cover Gilshochill and the area around it, including industrial estates, business parks and retail parks such as Balmore Industrial Estate. A few photographs and the unit address let us price the work.
Can you tell us what fire stopping our building needs?
No, that isn’t our role. Once you have a specification, we can price and install the sealant elements of it.
What happens if old sealant might contain asbestos?
Managing asbestos is the dutyholder’s responsibility, so for older buildings we ask for the asbestos register first. Work pauses if suspect material is found, until it has been tested.
Is the work guaranteed?
Yes. Our workmanship is backed for 12 months on every job.
How long does a job like this take?
That varies with the scale of the job, but the work typically takes anything from one day to a planned run of visits, depending on the number of seals and the access. For bigger or phased jobs, we will set out a timescale with the quote.
Is colour matching possible?
Often, yes. Sealants are made in a wide range of standard colours, and matching to RAL references or nearby finishes is commonly requested. We confirm what’s available for the specified product when we quote.
Also in Gilshochill
Leave it or put it right?
Fire stopping is a regular point raised at inspections and handover. Late discoveries can delay handover while openings are reopened and resealed, so earlier action pays back. In Gilshochill, as across Scotland, rain finds any gap, and failed external joints let it into stone walls and around frames. Resealing promptly protects the stone and the interior.
The price depends on how many linear metres there are, how much old material needs removing and how the joints are reached. Call for a quote when you are ready.
Why us?
- Fully insured
- Workmanship guaranteed for 12 months
- Constructionline member
- CHAS accredited contractor
Take a look at our cost guide or how we’re accredited.
Fire stopping around Gilshochill: points for this area
The area within 2 miles of Gilshochill holds a good number of hotels. In hotels, bedroom and corridor walls are normally fire-resisting, so services added in a refit need sealing with the specified product. Under the Scottish non-domestic Technical Handbook, clause 2.1.14, penetrations should be fire stopped to at least the wall or floor’s fire resistance duration, with proprietary products, intumescent ones included, tested for their end use. We install fire-rated sealant to that tested detail where it is specified.
Campus buildings at universities such as University of Glasgow Garscube Campus (to the west of Gilshochill) see constant changes to data and services, and fire-rated sealant goes in around new penetrations where it is specified. In a retail centre such as West End Retail Park, which lies south-west of Gilshochill, any fire-resisting wall between units that is crossed by new services needs sealing to the tested detail. At a healthcare site like Nuffield Health Glasgow Hospital, 1.2 miles to the south-west of Gilshochill, new services through compartment walls are a constant, and each needs the specified seal.
Gilshochill is about 3 miles south-east of Bearsden, in Glasgow. Anywhere in G20, the process is the same: send details, get a fixed quote, we seal, and the work is guaranteed. Gilshochill is one of 171 places we cover in Glasgow.
Postcode districts covered here: G20, G23 and G22 for service penetrations. We cover commercial and managed buildings on Cadder Road, Tresta Road and Maryhill Road and the roads nearby. Sites close to Gilshochill are covered too, including Cadder (1 mile north-east), High Ruchill (1 mile south), Maryhill (1 mile west), Botany (1 mile south-west) and Lambhill (1 mile east). Further afield, our area takes in Glasgow (3 miles south), Calton (3 miles south-east), Langside (5 miles south), Yoker (4 miles west), Mount Florida (5 miles south) and Hillpark (6 miles south).
Around Gilshochill
Recent enquiries here include premises near College of Piping, The Crosslands pub and Glasgow University Library, among other places. There’s a railway station in Gilshochill itself: Gilshochill station. Other landmarks nearby include Chinatown (2 miles south) and Glasgow Museum of Transport (2 miles south). The countryside around Gilshochill includes Lenzie Moss and Bardowie Loch.
When something else is needed
Being straight saves everyone time. New sealant won’t cure:
- Fire risk assessments, a job for a competent assessor
- Large openings beyond what any sealant detail covers
- Deciding what a wall or floor needs, which belongs to the designer
Not sure which it is? You can phone 01277 525 020 or use the quote form and we will tell you honestly.
Surfaces we seal
- Pipe penetrations
- Linear gaps at wall heads
- Small duct penetrations where the tested detail allows
- Service gaps in risers
- Joints between fire-resisting walls and floors
- Cable penetrations
Maintenance after handover
Keep the joints in good shape with a few simple steps:
- Record which product was used where
- Settle who seals which penetrations at the start of a project
- Look above ceilings when tiles are lifted for other jobs
- Make fire stopping part of every scope that crosses a fire-resisting wall
After the work, brief anyone else working in the area that the openings are now sealed. If a seal has to be opened for a new service, it should be reinstated to the same detail using the same product.
On fit-outs, get the fire-stopping specification agreed before the services go in. The designer can then choose details that suit the services planned, and installation follows the programme.
Surface by surface
Drylining partitions
Plasterboard partitions are tested as a specific construction. We check that the product’s detail covers that partition type and board thickness first.
Cables and cable bundles
Single cables and small bundles are often within a fire-rated sealant’s tested detail. The detail limits bundle size and the gaps between and around cables, so we check before sealing.
On site: what to expect
Occupied buildings need a little choreography. We sign and contain the area we’re in, with routes through the building left open and work section by section so the rest of the building stays in use. In a Scottish city, kerbside space and loading need planning, especially near the centre. Tenement closes, shared stairs and factor approvals may also be involved.
- We ask for the product and detail your designer has specified.
- Openings are measured and grouped by detail.
- Improvised fillers and failed sealant are removed.
- Mineral wool or other backing is fitted where required.
- We gun the sealant in to the specified depth around each service and tool it.
- We walk the completed areas with you and confirm the records agreed at quote stage.
What we need from you
- Point out any areas we must not close
- Have the specification and drawings to hand
- Send your site hours and access windows
Get a fixed quote
For a fixed quote, call the office on 01277 525 020 or email a schedule or drawings. You can also send details through our quote form.