
Tollcross fire stopping
Fire-rated and intumescent sealing of service penetrations and linear gaps throughout Tollcross and nearby, by CSCS-carded applicators. CHAS accredited and fully insured.
- Unsealed openings around new pipes and cables
- Fire stopping installed outside its tested range
- Hidden openings found during inspections
Need fire stopping in Tollcross?
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
What affects the price in Tollcross
Before we quote, we look at:
- Specialist products, such as fire-rated or hygienic sealants
- The total length or number of joints
- How accessible the joints are
- Removal of failed or old sealant
The work involved drives the cost: stripping out, preparation, sealing, access and phasing. Call for a quote and we will explain how it’s made up.
Details that help us quote
To price the job accurately, we need to understand the site. Send us:
- Anything awkward about access or site hours
- A wide shot and a close-up of the area
- Your programme or deadline
- Approximate linear metres or a joint schedule
For a fixed quote, call 01277 525 020 or use the quote form, telling us the site location and the nature of the job. Our quote form is another easy route.
Fire stopping in Tollcross
Every service that crosses a compartment wall or floor leaves an opening, and that opening needs sealing to hold back fire and smoke. Our job is fitting fire-rated and intumescent sealant at those service penetrations, and along linear gaps, where it is the specified product. We work to the product’s tested detail for every seal, not a rule of thumb. We work on service gaps in risers, joints between fire-resisting walls and floors and small duct penetrations where the tested detail allows, and the failures we’re asked to look at most are fire-stopping items raised at inspection or handover and seals disturbed by maintenance and left open. For commercial sealant work in Tollcross, you deal with one contact from quote to sign-off, whether it’s one building or several.
Older stone and tenement buildings in Scotland’s cities have typically been re-serviced many times. Before sealing, we confirm the wall or floor and the services passing through, so the product matches the detail.
The 12-month guarantee is for workmanship rather than wear and tear. How long a sealant joint lasts depends on movement, exposure, cleaning and use, so we are clear about what is covered before work starts.
- Where
- Tollcross (G32, G31)
- Region
- Glasgow
- Cover
- 12 months on our workmanship
- Price
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026

Towns and villages near Tollcross
Other services in Tollcross
Site staff or a sealant specialist?
There’s also the paperwork. Main contractors and clients often ask for CSCS cards, RAMS and insurance details, and our CSCS-carded applicators are used to working under those rules.
Site maintenance staff can often handle a short internal joint. The usual problems come from preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.
What we are called out for in Tollcross
Most open service penetrations are left by later work. New cabling, rerouted pipework or a data route drilled through a riser leaves an opening that nobody returns to. Over a few years of fit-outs, a wall can collect a lot of these.
Most enquiries start with something like this:
- Penetration schedules that need working through
- Non-fire-rated filler around services
- Seals that don’t match their tested detail
- Open linear gaps along the top of fire-resisting walls
For a unit at a centre such as The Forge Shopping Centre, 1.3 miles to the north-west of Tollcross, penetration seals are worth checking after each shop fit.
Questions to ask before you book
- What level of public liability insurance do they hold?
- Who will actually carry out the work
- Which product they’ll use, and why it suits the joint
- Their plan for phasing and protecting the area
How a job runs
We follow your site rules from the start: signing in, inductions and any permit to work. With the paperwork done, we take the joints in the sequence agreed with you. University, hospital and office estates in Scotland’s cities have their own permits, inductions and sign-in rules. Tell us the rules and we will work to them.
- First we go through the drawings, schedule or specification for the seals and raise any questions before we price.
- On site, each opening is checked against the tested detail it is meant to follow.
- Anything that doesn’t belong in the opening, such as expanding foam or general-purpose filler, is removed.
- We fit the backing the detail asks for, to the stated depth.
- We apply the specified sealant to the depth and around the services as the detail shows.
- Openings that need a collar, wrap, batt or other product are flagged to you rather than filled with sealant.
What we need from you
- Clear stock, furniture or equipment away from the joints
- Tell staff and tenants when we’ll be in
- For older buildings, check the asbestos register before work
Request a quote
Tell us about the building, the joints and when you need the work done, and a fixed quote will follow. The easiest way is to phone 01277 525 020 or email the details over.
Advice
How the job changes by surface
Plastic pipes
Waste and drainage pipes through floors are a frequent case. The detail decides whether sealant alone is enough, and we won’t substitute it for a specified collar.
Drylining partitions
Drylined fire walls are tested in a particular build-up. We check that the product’s detail covers that partition type and board thickness before sealing.
Tollcross: questions and answers
Would you work within a site like Lightburn Hospital?
Yes, healthcare and care buildings are part of our work. The estates team’s permit system and infection-control rules come first, and the work is planned around them.
Could you schedule work at a campus like University of Strathclyde for the vacation?
Yes, holiday working periods are the norm on campus jobs. Any paperwork you need, from RAMS to our insurance certificate and CSCS details, is confirmed with the quote.
Is your workmanship covered by a guarantee?
Yes. It runs for twelve months and covers how we prepared and sealed the joints, but not damage, misuse or other trades’ work.
How many days will you need on site?
We plan the time on site around your programme and access. We will give you an estimate of time on site when we quote.
Will you just go over the old sealant?
No, never. Sealing over old material is one of the classic causes of early joint failure, so everything comes out first.
What do you charge?
There isn’t a price list, because every site is different. Send photos or drawings and we’ll price it at a fixed figure.
Will you quote for a small job?
Small jobs are welcome alongside larger packages. Send details for a fixed quote.
Compartments and services around Tollcross
Scotland has its own building standards: the non-domestic Technical Handbook (clause 2.1.14) says service penetrations should be fire stopped to at least the fire resistance duration of the wall or floor, using products tested for the way they’re used. Our part is installing the specified fire-rated sealant to its tested detail. A 2-mile radius around Tollcross takes in a number of hotels. Bedroom-to-corridor walls in hotels are normally fire-resisting, so new cabling or pipework through them has to be sealed to the tested detail.
Large healthcare estates like Lightburn Hospital, 1.2 miles north of Tollcross, change their services often, so penetration seals are worth checking after M&E work. At a college such as Glasgow Kelvin College - East End Campus, which lies north-west of Tollcross, checking penetration seals after summer M&E works is good practice.
Tollcross is about 2 miles north-west of Cambuslang, in Glasgow. Tollcross sits inside our coverage, and jobs here get the same fixed quote and 12-month guarantee as anywhere else. Across Glasgow, 171 places are covered, Tollcross among them.
If you need fire stopping in G32 and G31, the process matches everywhere else we work: details, then a fixed price, then sealing and a 12-month guarantee. Streets here include Dalbeth Road, Falside Road and Lloyd Avenue. Tollcross sits on or close to the A74, useful when we plan access and materials. Nearby places we also cover include Auchenshuggle (1 mile south-west), Shettleston (1 mile north), Budhill (1 mile north-east), Lilybank (1 mile west) and Greenfield (1 mile north). Bigger towns within reach include Glasgow (4 miles west), Hillhead (5 miles north-west), Dowanhill (6 miles north-west), Woodlands (5 miles north-west), Woodside (5 miles north-west) and North Kelvinside (5 miles north-west).
Landmarks near Tollcross
Recent enquiries here include premises near St Andrew's Secondary School, Carmyle Primary School and Parkhead Library. For rail, the closest station is Carntyne station, about 0.8 miles north of the centre. Well-known places in the area include Farme Castle (1.4 miles south-west) and The Forge Shopping Centre (1.3 miles north-west). Green spaces nearby include Cathkin Braes and Hogganfield Loch.
Keeping the joints sound
Sealant joints are maintenance items, and their life depends on movement, exposure, cleaning and use. We suggest:
- Have penetrations checked while they can still be seen
- Settle who seals which penetrations at the start of a project
- Treat an open penetration as a priority repair
- Leave fire sealant to cure fully before covering it
Store the specified product details somewhere the next contractor can find them. It makes later repairs much easier to match.
Make reporting new openings part of every permit to work in service areas. It costs little and catches breaches early.