Fire stopping in Polmadie
Fire-rated and intumescent sealing of service penetrations and linear gaps in Polmadie and across Glasgow. CHAS accredited and fully insured, with a 12-month guarantee.
- Fire-stopping items raised at inspection or handover
- Open linear gaps along the top of fire-resisting walls
- Fire seals cut back for extra cables and never reinstated
Fire stopping for businesses in Polmadie
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
When it isn’t the sealant
Being straight saves everyone time. Fresh joints won’t solve:
- Reviewing a building’s overall fire safety
- Large openings beyond what any sealant detail covers
- Signing off or certifying a building’s fire stopping
If you’re not sure, just phone 01277 525 020 or email a schedule or drawings and we will give you a straight answer.
Surfaces we seal
- Small duct penetrations where the tested detail allows
- Pipe penetrations
- Cable penetrations
- Service gaps in risers
- Linear gaps at wall heads
- Joints between fire-resisting walls and floors
How we handle fire stopping in Polmadie
We are commercial sealant applicators, CHAS accredited and a Constructionline member, with CSCS-carded applicators on site. We hold no third-party fire-stopping installer certificate and we’d rather say that up front. What we offer is careful installation of the specified sealant to its tested detail, with a 12-month guarantee on our workmanship. The enquiries we see most involve builders’ foam or ordinary silicone in compartment walls and fire seals cut back for extra cables and never reinstated, on joints between fire-resisting walls and floors, linear gaps at wall heads and pipe penetrations. Most enquiries from Polmadie start with one failed joint and grow into a wider look at the building: we check the joints around it and give you an honest view of what needs doing now and what can wait.
Under Scotland’s building standards, a service penetration should keep at least the fire resistance duration of the wall or floor it passes through. For a building in Polmadie, specified fire-rated sealant is installed as the maker’s tested detail describes.
Every job we finish is backed by a 12-month workmanship guarantee, wherever the site is. If a joint we sealed fails because of how it was installed, we come back and put it right.
- Place
- Polmadie (G44, G73, G45)
- Wider area
- Glasgow
- Cover
- A 12-month guarantee
- Quotes
- A fixed quote before we start
- Phone
- 01277 525 020
- Page updated
- 3 November 2026
Places near Polmadie
What else we do in Polmadie
Do you need fire stopping in Polmadie?
Fire stopping can get squeezed at the end of a programme, or done by whoever is on site. That is when untested combinations creep in, which then have to be put right.
Clients typically get in touch after noticing something like this:
- Open linear gaps along the top of fire-resisting walls
- Seals disturbed by maintenance and left open
- Improvised or mixed-product fire seals
- Fire sealant pulled out of the opening
At a college such as Glasgow Clyde College - Langside Campus (1.3 miles north-west of Polmadie), checking penetration seals after summer M&E works is good practice.
Comparing quotes
- Is depth set with backing rod, or bond-breaker tape in shallow joints?
- How the existing material will be dealt with
- Proof of insurance
- Whether their applicators hold CSCS cards
On site: what to expect
Before any cutting starts, the area is protected: masking tape along the joint edges and sheeting over anything nearby. On site, the work usually takes anything from one day to a planned run of visits, depending on the number of seals and the access, and our waste is bagged and taken away as we go. For premises in Polmadie, tell us about access times, shared entrances and any building rules, and we’ll plan the work to suit, phased where areas need to stay in use.
- We ask for the product and detail your designer has specified.
- We sort the openings by the detail each one needs.
- Improvised fillers and failed sealant are removed.
- Mineral wool or other backing is fitted where required.
- Fire-rated or intumescent sealant goes in around the services and is tooled off.
- We walk the completed areas with you and confirm the records agreed at quote stage.
Before we start on site
- Point out any areas we must not close
- Move anything stored against the joints
- Send your site hours and access windows
Quotes
A good quote starts with a clear picture: the joints involved, quantities, access and the product called for. Send what you have, and we will arrange a site visit if anything is unclear.
Related advice
How the job changes by surface
Masonry and concrete
Core-drilled holes are neat; broken-out ones rarely are. The gap is measured at the widest point so we know it sits within the tested range, and any outside it are raised with you.
Risers and ceiling voids
Risers and ceiling voids hold most of a building’s service penetrations. Access is often tight, so we agree it with you in advance, including keys, permits and any isolations.
Should maintenance staff do it?
There’s also the paperwork. Many sites expect CSCS cards, RAMS and proof of insurance, and our CSCS-carded applicators are used to working under those rules.
The visible bead is only part of the job. Correct depth, the right primer and a sealant matched to the movement are where general trades tend to cut corners.
Looking after the joints
Sealant joints are maintenance items, and how long they last depends on how they’re treated. We suggest:
- Make fire stopping part of every scope that crosses a fire-resisting wall
- Ask the designer to confirm details early on refits
- Treat an open penetration as a priority repair
- File the specified details where the next contractor can find them
After the work, brief anyone else working in the area that the openings are now sealed. Any seal cut back for a new service needs reinstating to its tested detail.
Looking at service areas on a regular cycle pays off. Catching a damaged seal early keeps the fix small compared with dozens found at once.
Penetration seals near Polmadie
Polmadie has two care or nursing homes no more than 2 miles away. In a care home, any new pipe or cable through a fire-resisting wall should be sealed to the specified detail. Scottish guidance (non-domestic Technical Handbook, clause 2.1.14) asks that penetrations match at least the fire resistance period of the element they pass through, using products tested for the way they’re used. We install what’s specified, to the product’s tested detail.
Wherever services are added at a hospital such as New Victoria Hospital (1.4 miles north-west of Polmadie) the compartment line has to be made good with the specified product. Campus buildings at universities such as University of Strathclyde, 3.1 miles north of Polmadie, see constant changes to data and services, and fire-rated sealant goes in around new penetrations where it is specified.
Polmadie is about 3 miles north-east of Giffnock, in Glasgow. We cover Polmadie and the rest of Glasgow, and jobs here get the same fixed quote and 12-month guarantee as anywhere else. Our Glasgow coverage takes in 171 places, from busy centres to rural villages.
We cover the G44, G73 and G45 postcode districts. Among the streets we cover are Cavin Road, Menock Road and Spittal Road, and sites on any of them can send details for a fixed quote. Close to Polmadie, our area also takes in Croftfoot (1 mile south), King's Park (1 mile north-west), Spittal (1 mile east), Toryglen (1 mile north) and Simshill (1 mile south-west). Nearby towns on our patch include Glasgow (3 miles north-west), Hillhead (5 miles north-west), Dowanhill (5 miles north-west), Woodlands (4 miles north-west), Woodside (4 miles north) and North Kelvinside (5 miles north).
Landmarks near Polmadie
Around Polmadie, our work takes us to commercial buildings near Couper Institute and Library and Cathkin Park. Polmadie has its own railway station: Croftfoot station. A little further out are Scottish Football Museum (0.9 miles north-west) and New Victoria Hospital (1.4 miles north-west). The countryside around Polmadie includes Hogganfield Loch and Cathkin Braes.
Questions about Polmadie
Do you cover business parks and estates near Polmadie, such as Cathcart Court Industrial Estate?
Yes. We cover Polmadie and the area around it, including industrial estates, business parks and retail parks such as Cathcart Court Industrial Estate. Send details of the unit and the work through our quote form for a quick quote.
Do you work in occupied care homes around Polmadie?
Yes. We agree rooms and times with the manager and work a few areas at a time. Noise and disruption are kept to a minimum.
What about RAMS and site documents?
Requirements differ from site to site, so list what you need, whether RAMS, insurance or CSCS details, and we will confirm with the quote.
Do you work in Scotland as well as England?
Our work covers Greater London, the South East and every Scottish council area. In Scotland, clause 2.1.14 of the non-domestic Technical Handbook says service penetrations should keep at least the fire resistance of the wall or floor.
How do we ask for a quote?
There are four steps: send details, get a quote, we seal, guaranteed. Step one needs little more than photos and a postcode.
Do you cover Polmadie?
Yes. Polmadie is in our area, within our coverage of Greater London, South East England and Scotland. To discuss a job, phone 01277 525 020 or send details through our quote form.
Will you sign off the seals for us?
No. Sign-off isn’t ours to give, and we don’t hold a third-party installer certificate. Our part is fitting the specified product to its tested detail.