Fire-rated sealing and fire stopping in Kelvinside, Glasgow
Planning work on a service penetration in Kelvinside? We look at it, seal it with the right product and hand it over with a 12-month guarantee.
- Improvised or mixed-product fire seals
- Builders’ foam or ordinary silicone in compartment walls
- Head-of-wall gaps with no fire seal
Fire stopping for businesses in Kelvinside
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Compartment walls and floors in Kelvinside
The area within 2 miles of Kelvinside holds plenty of hotels. Bedroom-to-corridor walls in hotels are normally fire-resisting, so new cabling or pipework through them has to be sealed to the tested detail. Scotland has its own building standards: the non-domestic Technical Handbook (clause 2.1.14) says service penetrations should be fire stopped to at least the fire resistance duration of the wall or floor, with products tested for that end use. We install fire-rated sealant to that tested detail where it is specified.
At a college such as Glasgow Clyde College - Anniesland Campus, 0.6 miles to the west of Kelvinside, checking penetration seals after summer M&E works is good practice. Shop fits on retail sites such as West End Retail Park, 0.8 miles south of Kelvinside, can bring new services through fire-resisting walls between units, to be sealed with the specified product. At a healthcare site like Nuffield Health Glasgow Hospital, under half a mile north of Kelvinside, new services through compartment walls are a constant, and each needs the specified seal.
Kelvinside is about 2 miles north-west of Glasgow, in Glasgow. Our applicators travel to Kelvinside for work on service penetrations, handled exactly as we handle every other area. 171 places across Glasgow fall within our area, Kelvinside among them.
If you need fire stopping in G12, G11 and G20, the process matches everywhere else we work: details, then a fixed price, then sealing and a 12-month guarantee. We cover commercial and managed buildings on Kew Lane, Ford Road and Dudley Lane. Just outside Kelvinside, we also work in Hyndland (1 mile south-west), Dowanhill (1 mile south), Kelvindale (1 mile north-west), Partickhill (1 mile south) and Partick (1 mile south). Bigger towns within reach include Calton (3 miles south-east), Langside (4 miles south), Yoker (3 miles west), Mount Florida (5 miles south-east), Hillpark (5 miles south) and Shawlands (4 miles south).
Local landmarks in Kelvinside
Around Kelvinside, our work takes us to commercial buildings near Dawsholm Park, Church Street Primary School and Glasgow University Library and the streets around them. You’ll also find The Esquire House (0.7 miles north-west) and St Peter's Boys School (0.8 miles south). Kelvinside has its own railway station: Hyndland station. Other landmarks nearby include Glasgow Museum of Transport (1.1 miles south) and Chinatown (2 miles south-east). The countryside around Kelvinside includes Castle Hill and Kilmardinny.
Fire stopping in Kelvinside, done properly
We are commercial sealant applicators, CHAS accredited and a Constructionline member, with CSCS-carded applicators on site. We don’t hold a third-party fire-stopping installer certificate and we’d rather say that up front. We install the specified fire-rated sealant to its tested detail, and our workmanship carries a 12-month guarantee. If you are dealing with openings found when ceilings come down for a refit and seals that don’t match their tested detail, we can put it right. A single leaking joint is often how a building in Kelvinside first comes to us: we look at the rest while we’re there and tell you what we find.
In Scotland’s cities, university, hospital and office estates see services added year after year, and each new run of cable or pipe through a compartment wall needs sealing. Intumescent sealant goes in where the specification calls for it, with backing and depth as tested.
Guaranteed is the last step of every job. You get a 12-month guarantee on our workmanship, and the quote explains what it covers.
- Place
- Kelvinside (G12, G11, G20)
- Wider area
- Glasgow
- Guarantee
- 12 months on every job
- Quotes
- Quoted before any work starts
- Call
- 01277 525 020
- Updated
- 3 November 2026
Diagnose, treat, sign off
We follow your site rules from the start: signing in, inductions and any permit to work. Once we’re cleared to begin, the joints are worked through in the order agreed with your site contact. University, hospital and office estates in Scotland’s cities have their own permits, inductions and sign-in rules. Pass on the site’s contractor rules when you get in touch.
- We read the specification, drawings or penetration schedule you send and raise any questions before we price.
- Every penetration is compared with its detail: wall or floor type, service, gap size and depth.
- Anything that doesn’t belong in the opening, such as expanding foam or general-purpose filler, is removed.
- Mineral wool or other backing goes in wherever the detail asks.
- Fire-rated or intumescent sealant is gunned in to the specified depth, then tooled.
- Openings that need a collar, wrap, batt or other product are flagged to you rather than filled with sealant.
Preparing the site
- Flag any permit to work we’ll need
- Tell us which areas need to stay in use
- Arrange parking or a loading space
Quotes
Pricing a project or setting a maintenance budget? We will quote against your scope and drawings you can plan around. If you have questions first, give us a call on 01277 525 020 or send details through our quote form.
Related advice
Common questions from Kelvinside clients
Is hospital work, at somewhere like Nuffield Health Glasgow Hospital, something you do?
Yes, provided the work is planned with the site’s estates team. We follow the site’s permits, sign-in and infection-control procedures in every area.
How do the Scottish rules apply to fire-rated sealing in Kelvinside?
Scotland’s non-domestic Technical Handbook covers it in clause 2.1.14: penetrations keep at least the element’s fire resistance duration, with products tested for their end use. The detail is set by the designer and goes through the warrant process; we install the specified product to its tested detail.
Is any job too small?
We quote for single jobs as well as large packages and programmes. Photos and a description are enough to start.
When can you be on site?
Give us your site hours and any access windows in your enquiry, and we’ll plan around them. You can reach the office between 8am and 5pm, Monday to Friday.
Is colour matching possible?
It depends on the product. Some ranges are wide, others limited, so we will confirm the colours available for the specified product with the quote.
How many days will you need on site?
It depends on the scope, though a typical visit typically takes anything from one day to a planned run of visits, depending on the number of seals and the access. For bigger or phased jobs, we will set out a timescale with the quote.
Do you work to architects’ specifications?
Yes. Include it with the drawings when you ask for a quote, and the quote will be based on it.
When it isn’t the sealant
A few problems need another trade or a different fix, and we say so rather than covering them up:
- Openings that need collars, wraps, batts or boards rather than sealant
- Gaps in walls that were never built as compartment walls
- Deciding what a wall or floor needs, which belongs to the designer
If you’re not sure, just phone 01277 525 020 or send photos by email and we will give you a straight answer before you book.
Surfaces we seal
- Service gaps in risers
- Small duct penetrations where the tested detail allows
- Linear gaps at wall heads
- Pipe penetrations
- Cable penetrations
- Joints between fire-resisting walls and floors
Aftercare for building managers
Every sealant joint needs some looking after, and their life depends on movement, exposure, cleaning and use. We suggest:
- Foam or ordinary sealant is never a fire-seal repair
- Keep product data and details in the fire safety file
- Leave fire sealant to cure fully before covering it
- Treat an open penetration as a priority repair
Once the seals are in, tell other trades they exist and must not be disturbed. If a seal has to be opened for a new service, it should be reinstated to the same detail, by someone who knows the system.
A simple record of seal locations and products helps. When a new service goes through, everyone knows which product and detail to match, which saves guesswork.
Nearby places to Kelvinside
Other services in Kelvinside
Owners, agents and contractors
Building owners and managing agents use us on sealant work across single buildings or whole portfolios around Kelvinside. One quote can cover more than one site, so there’s one set of paperwork to deal with.
FMs need a contractor who is easy to get on site. Tell us what site paperwork you need, such as RAMS, an insurance certificate or CSCS details, and we’ll confirm with the quote.
Should maintenance staff do it?
Certain joints really need a specialist: fire-rated seals that must follow a tested detail, trafficked floor joints and external movement joints among them. Getting these wrong typically costs more in the end than doing them right.
There’s also the paperwork. Main contractors and clients often ask for CSCS cards, RAMS and insurance details, and our CSCS-carded applicators are used to working under those rules.
Different surfaces, different methods
Risers and ceiling voids
Voids hide a lot of unsealed openings. We work through the areas on your schedule methodically.
Metal pipes
Copper and steel pipes are a common service penetration for fire-rated sealant. Pipe diameter, annular gap, sealant depth and any pipe insulation all have to match the detail and we confirm each before sealing.