Fire stopping in Springboig
Commercial sealant work in Springboig for contractors, FMs and building owners: fire-rated and intumescent sealing of service penetrations and linear gaps, quoted at a fixed price.
- Fire-stopping items raised at inspection or handover
- Openings found when ceilings come down for a refit
- Damaged fire seals in risers and voids
Fire stopping for Springboig sites
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Fire stopping in Springboig, done properly
The test standards are BS EN 1366-3 for penetration seals and BS EN 1366-4 for linear joints, with results classified under BS EN 13501-2. A rating such as EI 60 only holds when the product is installed as it was tested. Reproducing the tested arrangement on site is the part we take care of. We work on joints between fire-resisting walls and floors, linear gaps at wall heads and service gaps in risers, and what we are called in for most is unsealed joints where partitions meet the slab and seals disturbed by maintenance and left open. Whoever orders the work in Springboig, the brief is normally the same: a clear scope, tidy work and joints that don’t fail again.
Scotland’s non-domestic Technical Handbook says a service penetration ought to match, as a minimum, how long the wall or floor resists fire. In Springboig, penetrations get the fire-rated sealant the specification asks for, built to its tested arrangement.
Every job is signed off with a 12-month guarantee. It’s a plain promise: if our work fails within that year, we put it right.
- Place
- Springboig (G32, G33)
- Wider area
- Glasgow
- Cover
- A 12-month guarantee
- Quotes
- A fixed quote before we start
- Phone
- 01277 525 020
- Page updated
- 3 November 2026
Surface by surface
Drylining partitions
Drylined fire walls are tested in a particular build-up. We check that the product’s detail covers that partition type and board thickness before sealing.
Linear joints
Head-of-wall gaps, slab edges and wall junctions are linear joints. Their tested detail, under BS EN 1366-4, sets the width, depth, backing and movement allowed, and we work within it.
Quoting for work in Springboig
We price every job individually. The main factors are:
- Backing rod, priming and other preparation
- How much existing material needs removing
- How accessible the joints are
- Quantities, in metres or numbers
Quantities, awkward access and phased working all shape the price. So do site requirements such as inductions and permits, along with the time of year for external work.
Details that help us quote
A few photographs plus some basic facts will normally do. It helps to include:
- Approximate linear metres or a joint schedule
- Your programme or deadline
- Whether the building will be occupied during the work
- The product your specification calls for
If there’s a specification, drawings or a tender package, send it with your enquiry, and we will price the work to it. For smaller jobs, photos and a description will do.
Also near Springboig
More services for Springboig
After the work
Cleaning and maintenance staff play a part too. Pass these on to them:
- Keep general-purpose fillers away from compartment walls
- Record which product was used where
- Get seals inspected before ceilings and boxing close
- Put resealing into every M&E and fit-out package
After the work, brief anyone else working in the area that the openings are now sealed. Any seal cut back for a new service needs reinstating to its tested detail using the same product.
Keep a register of where seals are and what they are made of. When a new service goes through, everyone knows which product and detail to match, which saves guesswork.
Diagnose, treat, sign off
Site rules come first: sign-in, induction and whatever permit system the building uses. Once we are cleared to begin, we take the joints in the sequence agreed with you, and each area is checked before we leave it. In a Scottish city, kerbside space and loading need planning, especially near the centre. Shared closes, stairs and the property factor may need to be part of the plan.
- We read the specification, drawings or penetration schedule you send.
- Every penetration is compared with its detail: wall or floor type, service, gap size and depth.
- Anything that doesn’t belong in the opening, such as expanding foam or general-purpose filler, is removed.
- We fit the backing the detail asks for, to the stated depth.
- Fire-rated or intumescent sealant is gunned in to the specified depth, then tooled.
- If an opening needs something other than sealant, we tell you instead of improvising.
What we need from you
- Tell us what induction or permit system the site runs
- Tell staff and tenants when we’ll be in
- Clear stock, furniture or equipment away from the joints
Request a quote
Need a figure for a tender or a budget? We will quote against your scope and drawings that you can work with. If you have questions first, call the office on 01277 525 020 or send details through our quote form.
Advice
FAQs: Springboig
Would you work within a site like Lightburn Hospital?
Yes, provided the work is planned with the site’s estates team. Each area is agreed with the ward or department and the estates team in advance.
Will you take on work at estates like Queenslie Industrial Estate, close to Springboig?
Yes. We cover Springboig and the area around it, including industrial estates, business parks and retail parks such as Queenslie Industrial Estate. Photos and a short description are enough for a first look.
What does an EI 60 rating mean?
In short, BS EN 1366-3 and 1366-4 are the fire tests and BS EN 13501-2 is how results are classified. EI 60 means integrity and insulation for 60 minutes in the tested arrangement and the installation has to match the test.
How many days will you need on site?
The duration is planned around your programme and the access we’re given. We will give you an estimate of time on site when we quote.
What will the job cost?
It depends on the job: quantities, access, the product and any phasing. Call for a quote.
Can one quote cover more than one building?
Yes. We take on portfolio and planned maintenance work, with each site phased to suit its occupants.
How do you choose the sealant?
The specification comes first, if there is one. If there isn’t one, it comes down to the joint: how much it moves, what it bonds to and whether it’s wet, trafficked or fire-rated.
Why it’s worth doing now in Springboig
An open or wrongly sealed service penetration lets fire and smoke reach the next compartment much sooner than the building was designed for. Putting it right is normally a modest job when the openings are accessible. Left until ceilings are closed or a tenant moves in, the same work costs more access and more disruption. Getting access arranged for a building in Springboig takes time, so deal with all failing joints while access is up.
The price depends on the quantity of joints, what has to come out first and how the joints are reached. Call for a fixed quote when you’re ready.
Why appoint us
- Sealing commercial buildings since 2005
- A Constructionline member, so easy to vet
- Failed material removed, not covered up
- Specification-led, product-correct work
Service penetrations in Springboig buildings
Scottish guidance (non-domestic Technical Handbook, clause 2.1.14) asks that penetrations match at least the fire resistance period of the element they pass through, with products tested for that end use. Where fire-rated sealant is specified, that’s what we install, to the tested detail.
Shop fits in centres such as The Forge Shopping Centre (to the west of Springboig) can bring new services through fire-resisting walls between units, which then need the specified seal. Industrial units on estates such as Queenslie Industrial Estate, 0.7 miles north-east of Springboig, often separate offices from warehouse space with fire-resisting walls, and new services through them need the specified seal. On a hospital site such as Lightburn Hospital, which lies north-west of Springboig, fire-rated sealant goes in where the specification calls for it, with the work planned around the estates team’s permits.
Springboig is about 3 miles north of Cambuslang, in Glasgow. Springboig sits inside our coverage, with the same fixed quotes and 12-month guarantee as everywhere else. Across Glasgow, 171 places are covered, Springboig among them.
Anyone looking for fire stopping in G32 and G33 gets the same process as the rest of our area: details, then a fixed price, then sealing and a 12-month guarantee. Among the streets we cover are Glen Road, Glen Avenue and Monach Road, and sites on any of them can send details for a fixed quote. Nearby places we also cover include Budhill (1 mile south-west), Greenfield (1 mile south-west), Lightburn (1 mile west), Sandyhills (1 mile south-east) and Cranhill (1 mile north-west) for service penetrations. A short drive away, we cover Glasgow (5 miles west), Hillhead (5 miles west), Dowanhill (6 miles west), Woodlands (5 miles west), Woodside (5 miles west) and North Kelvinside (5 miles west).
Near you in Springboig
Locally, jobs take us to sites close to Eastbank Academy and Parkhead Library. There’s a railway station in Springboig itself: Shettleston station. Nearby you will also find Lightburn Hospital (under half a mile west) and Tollcross Museum (1 mile south-west). Green spaces nearby include Lenzie Moss and Hogganfield Loch.
When it isn’t the sealant
We check first that sealant really is the fix. It won’t put right:
- Fire doors, dampers or other fire safety equipment
- Gaps in walls that were never built as compartment walls
- Large openings beyond what any sealant detail covers
If you are not sure, just give us a call on 01277 525 020 or email the details over and we’ll give you a straight answer before you book.
What we seal
- Joints between fire-resisting walls and floors
- Linear gaps at wall heads
- Small duct penetrations where the tested detail allows
- Service gaps in risers
- Pipe penetrations
- Cable penetrations