Fire Stopping in Old Balornock
Work needed on a service penetration in Old Balornock? We assess it, carry out the work and guarantee our workmanship for 12 months.
- Unsealed penetrations discovered above suspended ceilings
- Fire seals cut back for extra cables and never reinstated
- Non-fire-rated filler around services
Fire stopping near Old Balornock
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
About our fire stopping in Old Balornock
No fire sealant works on its own: the evidence covers a specific product, wall or floor type, service, gap, depth and backing. We match each opening to that detail before any sealant goes in, and raise it with you if it falls outside. We work on service gaps in risers, linear gaps at wall heads and pipe penetrations, and the failures we are asked to look at most are fire seals cut back for extra cables and never reinstated and open linear gaps along the top of fire-resisting walls. For commercial sealant work in Old Balornock, you deal with one contact from quote to sign-off, for single jobs and planned programmes alike.
Large city estates in Scotland, from universities to hospitals and offices, are re-serviced constantly, and each new run of cable or pipe through a compartment wall needs sealing. Intumescent sealant goes in where the specification calls for it, with backing and depth as tested.
We stand behind the joints we seal with a 12-month guarantee. That covers our preparation and application, and if something we did falls short, we return to it.
- Where
- Old Balornock (G31, G21, G4)
- Region
- Glasgow
- Cover
- 12 months on every job
- Quote
- Quoted before any work starts
- Call
- 01277 525 020
- Last updated
- 3 November 2026
How the quote is worked out
What shapes the price:
- Whether old sealant has to be cut out first
- Travel to remote or island sites
- Whether the work must be split into stages
- Specialist products, such as fire-rated or hygienic sealants
Access often affects the price as much as the sealing: easy-to-reach joints are quicker than those that need equipment to get to. Mention the access as part of your enquiry.
What to include in your enquiry
Good information means a firmer quote. When you get in touch, include:
- The type of building and who uses it
- The site address and postcode
- When you need the work done
- Any specification or named product
For a fixed quote, call 01277 525 020 or email drawings and photos with the site address and an outline of the work. You can also send details through our quote form.
Places near Old Balornock
Also in Old Balornock
Maintenance after handover
For the best life from the joints:
- Agree the fire-stopping specification before services go in
- Include service cupboards in routine inspections
- Flag new cables with no seal around them
- Ask which product is in place before decorating
New services after handover are a common way fire stopping gets breached. A short check at the end of each job saves a long hunt later.
On fit-outs, get the fire-stopping specification agreed before the services go in. The designer can then choose details that suit the services planned, and installation follows the programme.
Compartments and services around Old Balornock
Scottish guidance (non-domestic Technical Handbook, clause 2.1.14) asks that penetrations match at least the fire resistance period of the element they pass through, and products should be tested for their end use. We install fire-rated sealant to that tested detail where it is specified. A 2-mile radius around Old Balornock takes in plenty of hotels. Hotels are divided into compartments, and refurbishments that add pipes and cables through bedroom and corridor walls leave gaps to close.
For a hospital such as Glasgow Royal Infirmary, which lies south-west of Old Balornock, penetration sealing is usually phased ward by ward, with infection-control rules agreed first. At a college such as Glasgow Kelvin College - Springburn Campus, which lies north-west of Old Balornock, checking penetration seals after summer M&E works is good practice. For an estates team at a campus like University of Strathclyde (0.8 miles east of Old Balornock), summer M&E works are normally followed by a round of penetration sealing.
Old Balornock is about 2 miles north-east of Glasgow, in Glasgow. Our applicators travel to Old Balornock for work on service penetrations, handled exactly as we handle every other area. Our Glasgow coverage takes in 171 places.
If you need fire stopping in G31, G21 and G4, the process matches everywhere else we work: details, then a fixed price, then sealing and a 12-month guarantee. For a building on Townmill Road, Royston Square and Blochairn Road or nearby, send details and we’ll quote for service penetrations. Access to Old Balornock is via the M8 and A8 among other routes. We also cover Blochairn (1 mile east), Germiston (1 mile north-east), Royston (1 mile west), Dennistoun (1 mile south) and Sighthill (1 mile west) for service penetrations. Further afield, our area takes in Hillhead (3 miles west), Dowanhill (3 miles west), Partickhill (3 miles west), Yorkhill (3 miles west), Kelvinside (3 miles west) and Hyndland (4 miles west).
Near you in Old Balornock
Recent enquiries here include premises near Andersonian Library and Springburn Park and the streets around them. The closest station to Old Balornock is Barnhill station, roughly 0.6 miles north of the centre. Nearby you’ll also find The Forge Shopping Centre (1.4 miles south-east) and Canniesburn Hospital (0.6 miles south-west). Green spaces nearby include Lenzie Moss and Hogganfield Loch.
Should maintenance staff do it?
Site maintenance staff can often handle a short internal joint. The usual problems come from preparation: sealing over old material, sealing onto damp or dusty surfaces, or a product that can’t take the movement.
There’s also the paperwork. Main contractors and clients often ask for CSCS cards, RAMS and insurance details, and we’ll confirm the paperwork you need with the quote.
Why act early in Old Balornock
Sealing behind the M&E trades area by area beats a sweep at the end. Openings are visible, access is open and nothing has to be taken down, and the right detail can be checked at the time. In a Scottish city, access often needs scaffold, permits or factor approval, so deal with all failing joints while access is up.
No two sites price the same: joint size, product, access and site hours all play a part. A fixed quote follows once we understand the job.
What you get with us
- 12 months’ guarantee on every job
- Fully insured, including public liability cover
- Old sealant cut out, never sealed over
- Constructionline member for supplier checks
When something else is needed
We check first that sealant really is the fix. It isn’t the answer for:
- Walls or floors that aren’t fire-resisting to begin with
- Reviewing a building’s overall fire safety
- Writing the fire-stopping specification
If in doubt, ring 01277 525 020 or email us and we will say what we think before you book.
Joints and surfaces we work on
- Small duct penetrations where the tested detail allows
- Cable penetrations
- Service gaps in risers
- Linear gaps at wall heads
- Joints between fire-resisting walls and floors
- Pipe penetrations
Diagnose, treat, sign off
Diagnose, treat, sign off: that’s the shape of every visit. First comes an inspection and agreement on scope, then we prepare and seal each joint with the specified product, and we finish with a walk round so the work can be signed off. City jobs in Old Balornock usually need parking and loading planned. Tenement closes, shared stairs and factor approvals may also be involved.
- We read the specification, drawings or penetration schedule you send.
- On site, each opening is checked against the tested detail it is meant to follow.
- Unsuitable fillers and loose debris are taken out of each opening.
- We fit the backing the detail asks for, to the stated depth.
- We apply the specified sealant to the depth and around the services as the detail shows.
- Openings that need a collar, wrap, batt or other product are flagged to you rather than filled with sealant.
Preparing the site
- For older buildings, check the asbestos register before work
- Let building users know which areas are affected
- Explain the parking and delivery arrangements
Getting a fixed quote
Tell us about the building, the joints and when you need the work done, and a fixed quote will follow. The easiest way is to phone 01277 525 020 or use the quote form.
Related advice
Questions about Old Balornock
Do you cover business parks and estates near Old Balornock, such as Blochairn Industrial Estate?
Yes. Our area takes in Old Balornock and its surroundings, with estates and business parks such as Blochairn Industrial Estate included. Photos and a short description are enough for a first look.
Can you work around term dates at a campus such as University of Strathclyde?
Yes. We plan campus work around teaching, exams and residence turnarounds. We are CHAS accredited and a Constructionline member, and paperwork such as RAMS is confirmed with the quote.
Is any job too small?
Small jobs are welcome alongside larger packages. Photos and a description are enough to start.
What about RAMS and site documents?
Tell us what site paperwork you need (RAMS, insurance certificate, CSCS details) and we will confirm with the quote.
Is your workmanship covered by a guarantee?
Yes. Our workmanship is backed for 12 months on every job.
Do the same rules apply to fire stopping in Scotland?
Building standards in Scotland are separate from England’s, and England uses Approved Document B. Wherever the site is, our work follows the specification and the tested detail.
Can you seal any opening with fire-rated sealant?
No. Sealant is the right product only where the tested detail says so. Collars, wraps, batts and boards exist for openings sealant doesn’t cover.