South East England and London

Fire Stopping in East Sussex

Fire stopping in all 308 towns and villages of East Sussex, done properly, quoted before any work starts and a 12-month guarantee.

Need fire stopping in East Sussex?

Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.

Get a quick quote 01277 525 020

Fire stopping in every part of East Sussex

Fire-rated and intumescent sealing of service penetrations and linear gaps. Pick your town below to see the details for your area, and call or email us for a quote.

Main towns

How fire stopping works in East Sussex

Opened ceilings and riser doors often reveal service openings nobody sealed. Where the walls and floors already have a fire-stopping specification, we can work to it, matching the product and detail it names. Where there isn’t one, the designer or fire engineer needs to set one first. We work on small duct penetrations where the tested detail allows, pipe penetrations and service gaps in risers, and the usual reasons a site gets in touch are fire stopping installed outside its tested range and expanding foam used as fire stopping.

Before we leave any area, the masking comes off, the area is cleaned and every joint is checked. Where the sealant needs time to cure before use, we tell you and sign the area.

We ask for the product and detail your designer has specified.
We sort the openings by the detail each one needs.
Improvised fillers and failed sealant are removed.
Mineral wool or other backing is fitted where required.
Fire-rated or intumescent sealant goes in around the services and is tooled off.
We walk the completed areas with you and confirm the records agreed at quote stage.

Pricing in East Sussex

The work involved drives the cost: removing old material, preparing the joints, the product, the access and how the work is phased. Call for a fixed quote.

Why clients in East Sussex choose us

Work carried out by CSCS-carded applicators
Commercial sealant work since 2005
A Constructionline member, so easy to vet
12 months’ guarantee on every job

Quotes

Send us photos, drawings or a joint schedule and a fixed quote comes back to you. Where a site visit makes more sense, we’ll arrange one.

Around Eastbourne

In Eastbourne, that means premises near St Andrew, Princes Park and Stafford Junior School. Nearby too are The King's Arms Public House (0.9 miles south-east), WMG Academy for Young Engineers (1.5 miles south-west) and Ratton School (1.1 miles west). The nearest railway station is Hampden Park station, about 0.7 miles north-west. A little further out are Pevensey Castle (3 miles north-east) and Royal Sussex Regimental Museum (1 mile south-east). Open spaces near Eastbourne include Combe Hill.

Fire stopping across East Sussex: the area picture

Fit-outs and M&E works in places such as Eastbourne, Hastings and Bexhill-on-Sea are a common reason fire stopping gets breached. Checking after services work is good practice; tell us what the specification says and we’ll install to it.

We work across Greater London and the South East counties, and every job in East Sussex starts with access, parking and site rules. Coastal places in East Sussex often have hotels, guest houses and holiday accommodation with busy seasons, which makes the quieter months a good time for sealant work.

Eastbourne: Tenant changes at centres like Hampden Park Retail Park, 0.7 miles to the north of Eastbourne, often mean new services through walls between units. For a unit at a site such as Hammond Industrial Estate (0.5 miles east of Eastbourne), new power or data runs between office and warehouse can breach a compartment wall.

Leave it or put it right?

An improvised seal can look finished while offering no tested performance. Correcting it means cutting it out and starting again with the specified product, and doing it once, properly, is cheaper.

Questions to ask before you book

Are they CHAS accredited or on Constructionline?
How the existing material will be dealt with
Whether primer will be used where the manufacturer specifies it
The terms of the workmanship guarantee

How the job changes by surface

Linear joints

Head-of-wall joints often have to absorb slab deflection. The specified product and backing for that movement are what goes in.

Masonry and concrete

Many seals are made in blockwork, brickwork or concrete slabs. Dust and debris are cleared from the opening.

For managing agents and facilities managers

As a CHAS accredited contractor and Constructionline member, we’re straightforward to vet for your supplier list. We are fully insured, and our insurance certificate can go with the quote.

Agents, factors and owners’ representatives all follow the same route: send the details, accept a fixed quote, and we carry out and guarantee the work. We can agree access arrangements and keyholder contacts beforehand.

When it isn’t the sealant

Not every problem is a sealant problem, and we’re upfront when that’s the case. These need a different solution:

Plastic pipes whose detail calls for a collar or wrap
Approving the work on behalf of building control
Fire doors, dampers or other fire safety equipment

After the work

Sealant joints are maintenance items, and how long they last depends on how they’re treated. Our advice:

Settle who seals which penetrations at the start of a project
Leave fire sealant to cure fully before covering it
Report damaged or disturbed seals as soon as they’re spotted
Record which product was used where

Store the specified product details somewhere the next contractor can find them. It makes later repairs much easier to match.

Ask every contractor who works in risers or voids to report openings they create. It costs little and catches breaches early.

Common questions from East Sussex clients

Can you fire stop behind the services contractors?

Yes. Share the penetration schedule and product details. We can follow the services contractor floor by floor so areas aren’t left open.

When can the area be used after sealing?

The product and site conditions decide that. Some products skin over quickly but need longer to cure fully, so we’ll confirm the curing time on the day.

How long does a typical visit take?

We plan the time on site around your programme and access. We’ll give you an estimate of time on site when we quote.

Is fire stopping in Scotland covered by different guidance?

Our area runs from Greater London and the South East to every part of Scotland. In Scotland, clause 2.1.14 of the non-domestic Technical Handbook says service penetrations should keep at least the fire resistance of the wall or floor, with proprietary products tested for the end use.

Is BS 476 being phased out?

For buildings in England, Approved Document B removes BS 476 references from 2 September 2029. Classification to BS EN 13501-2 becomes the expected evidence, subject to transitional arrangements. In Scotland, the Technical Handbook sets its own guidance, including clause 2.1.14 on service penetrations.

Are you fully insured?

Yes. We are fully insured, including public liability cover.

What do BS EN 1366-3 and BS EN 13501-2 mean?

The tests are BS EN 1366-3 for penetrations and BS EN 1366-4 for linear joints, and classification is to BS EN 13501-2. An EI 60 seal kept its integrity and insulation for 60 minutes as tested.