Meads fire stopping
Commercial sealant work in Meads for contractors, FMs and building owners: fire-rated and intumescent sealing of service penetrations and linear gaps, quoted at a fixed price.
- Fire seals cut back for extra cables and never reinstated
- Service penetrations left open after M&E works
- Head-of-wall gaps with no fire seal
Fire stopping near Meads
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Fire stopping for commercial buildings in Meads
Opened ceilings and riser doors often reveal service openings nobody sealed. Where the walls and floors already have a fire-stopping specification, we can work to it, matching the product and detail it names. Where there isn’t one, the designer or fire engineer needs to set one first. If you’re dealing with seals that don’t match their tested detail and penetration schedules that need working through, we can put it right. A specialist sealant contractor works differently from a general builder: in Meads, that means joint design, primers and backing rod as standard.
Around Meads, penetration and linear seals tend to be one-building jobs. With the specification and photos of the gaps, we can give a fixed quote and bring the right products.
The 12-month guarantee covers our workmanship: the preparation, the sealing and the tooling. Damage, later alterations by others and movement beyond what the joint was designed for sit outside it.
- Place
- Meads (BN20, BN21)
- Region
- East Sussex
- Cover
- 12 months on our workmanship
- Price
- Quoted before any work starts
- Call
- 01277 525 020
- Last updated
- 3 November 2026
Cost factors for service penetrations
To price the job, we consider:
- Access and working height
- Which sealant the job calls for
- Joint width, depth and condition
- Distance, for remote addresses
What a job costs comes down to how many linear metres there are, what has to come out first and the access. Call for a quote once you have the details.
What we need to price the job
A good diagnosis starts with the right details. Tell us:
- The postcode of the building
- Any specification or named product
- Photos of the joints, close up and from further back
- Whether an asbestos survey exists
Every job follows the same four steps: send details, get a quote, we seal, guaranteed. To take the first step, speak to us on 01277 525 020 or send photos by email.
What the job involves on each surface
Metal pipes
Sealant details often cover copper and steel pipework. Pipe diameter, annular gap, sealant depth and any pipe insulation all have to match the detail, so we check each one.
Plastic pipes
Plastic pipes soften and collapse in a fire. Some intumescent sealants are tested on smaller plastic pipes. We confirm material and size first and tell you if sealant isn’t the right product.
Site staff or a sealant specialist?
Redoing a failed joint normally costs more than getting it right at the outset, because the whole bead must be removed and the faces cleaned back again. For that reason, many FMs and contractors use a sealant specialist from the outset.
Paperwork matters too. Main contractors and clients often ask for CSCS cards, RAMS and insurance details, and our CSCS-carded applicators are used to working under those rules.
Compartments and services around Meads
Fire stopping of openings and penetrations in England falls under Approved Document B. The national BS 476 classes are due to drop out of it from 2 September 2029, leaving the European BS EN 13501-2 route, subject to transitional arrangements. Our part stays the same: the specified product, installed to its tested detail. A 2-mile radius around Meads takes in a good number of hotels. A hotel refit often runs new services through compartment walls between bedrooms and corridors, and each opening needs the specified seal.
Industrial units on estates such as Courtlands Road Industrial Estate, 1.8 miles north-east of Meads, often separate offices from warehouse space with fire-resisting walls, and new services through them need the specified seal. At a university such as University of Brighton Eastbourne Campus, which lies west of Meads, labs, lecture blocks and residences are re-serviced often, so penetration seals are best checked after M&E work. Workshops and IT rooms at colleges like East Sussex College Eastbourne, 2.3 miles north of Meads, are re-serviced often, leaving penetrations to seal.
Meads is about 2 miles south of Eastbourne, in East Sussex. We send applicators to Meads for service penetrations. 308 places across East Sussex fall within our area, including Meads. We also cover Brighton, around 18 miles from Meads.
We cover the BN20 and BN21 postcode districts. For a building on Link Road, Mount Road and Cliff Road or nearby, send details and we’ll quote for service penetrations. We also cover Holywell (1 mile south-east), Old Town (1 mile north), Upperton (1 mile north), Eastbourne (2 miles north) and Ratton Village (3 miles north). Further afield, our area takes in Hastings (15 miles north-east), Bexhill-on-Sea (11 miles north-east), Seaford (7 miles west), Lewes (14 miles north-west), Hailsham (7 miles north) and St Leonards (14 miles north-east).
Local landmarks in Meads
We work on buildings around Gildrege Park, Gildredge House and The Ship Inn. For rail, the closest station is Eastbourne station, about 1.1 miles north-east. Other landmarks nearby include Eastbourne District General Hospital (2.1 miles north) and Rnli Eastbourne Lifeboat Museum (0.9 miles north-east). Not far away are Combe Hill.
When it isn’t the sealant
Our job is the joint, not everything around it. On its own, sealant can’t deal with:
- Construction that lacks the fire resistance the seal relies on
- Deciding what a wall or floor needs, which belongs to the designer
- Fire risk assessments, a job for a competent assessor
If in doubt, ring 01277 525 020 or email us and we’ll say what we think.
Joints and surfaces we work on
- Service gaps in risers
- Small duct penetrations where the tested detail allows
- Pipe penetrations
- Linear gaps at wall heads
- Cable penetrations
- Joints between fire-resisting walls and floors
On site: what to expect
On arrival, we sign in, go through any site induction and check how permits are handled. Everything around the joints gets protected before any cutting starts, and the work typically takes longer where risers, ceiling voids or occupied floors have to be worked through in sequence. If neighbouring businesses or buildings around Meads need work too, visits can be combined. Tell us your site hours and we’ll plan around them.
- We read the specification, drawings or penetration schedule you send and ask about anything unclear.
- On site, each opening is checked against the tested detail it is meant to follow.
- Unsuitable fillers and loose debris are taken out of each opening.
- We fit the backing the detail asks for, to the stated depth.
- We apply the specified sealant to the depth and around the services as the detail shows.
- Openings that need a collar, wrap, batt or other product are flagged to you rather than filled with sealant.
Before we start on site
- Agree which areas must stay open
- Send your site hours and access windows
- Flag any permit to work we’ll need
Ask for a quote
Photos, drawings or a schedule of the joints are often enough for a fixed quote. If the job needs a look first, we will arrange a site visit.
Related advice
Also near Meads
Other services in Meads
Keeping the joints sound
Once the work is signed off, these steps help:
- Check with the data sheet before painting over fire sealant
- Put resealing into every M&E and fit-out package
- Keep product data and details in the fire safety file
- Look above ceilings when tiles are lifted for other jobs
Once the seals are in, tell other trades they exist and must not be disturbed. If a seal has to be opened for a new service, it should be reinstated to the same detail, by someone who knows the system.
A simple record of seal locations and products helps. It tells the next contractor exactly what to reinstate.
Common questions from Meads clients
What happens to BS 476 references for fire stopping in Meads?
References to BS 476 classes are being removed from Approved Document B from 2 September 2029, after which BS EN 13501-2 classification is the route, subject to transitional arrangements. Our part doesn’t change: the specified product, to its tested detail.
Is Meads too far out for you?
No. Places such as Meads are covered as much as the big towns. We work across Greater London and the South East. We plan jobs in smaller places so return trips are kept to a minimum.
Do you seal on top of existing sealant?
No. Failed sealant is removed and the faces cleaned back to sound, dry material first, since fresh sealant will not bond reliably to aged material.
Does the weather affect the work?
It can, for external work. Sealant won’t bond properly to a wet or frosty joint, so external work may be moved if conditions aren’t right. Internal work is far less affected.
Is any job too small?
Whatever the size, the process is the same: send details, get a fixed quote, we seal, guaranteed.
Are you CHAS accredited and on Constructionline?
Yes. We are CHAS accredited and a Constructionline member, which helps with supplier vetting.
Do you guarantee your work?
Yes. It runs for twelve months and covers how we prepared and sealed the joints, but not damage, misuse or other trades’ work.