Doleham fire stopping
Looking for fire stopping in Doleham? Send us the details for a fixed quote, backed by a 12-month guarantee on the work.
- Old intumescent sealant that has split away
- Non-fire-rated filler around services
- Openings left by services added after handover
Fire stopping near Doleham
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Surface by surface
Drylining partitions
Service holes through plasterboard are frequently oversized or ragged. An oversized hole may be outside the sealant’s range.
Plastic pipes
Plastic pipes soften and collapse in a fire. Some intumescent sealants are tested on smaller plastic pipes, though larger ones typically call for a collar or wrap. We check the pipe material and diameter against the detail before we start.
Fire stopping in Doleham, done properly
It helps to set out our role at the start. The designer, fire engineer or building control decides which fire stopping is required. We fit the specified fire-rated sealant following that specification and the maker’s installation guidance in Doleham and nearby. Site teams most often ask us about expanding foam used as fire stopping and unsealed openings around new pipes and cables, on service gaps in risers, joints between fire-resisting walls and floors and pipe penetrations. Searching for sealant specialists in Doleham? We have been sealing commercial buildings since 2005, with CSCS-carded applicators.
Smaller places such as Doleham still have buildings with fire-resisting walls and floors: schools, halls, care homes and commercial conversions. Any service penetration through those walls should be closed with the specified product, set out as its test evidence shows.
Building owners and contractors get the same cover: twelve months on the work we carried out. It doesn’t extend to damage, faults in the building or work by others, and we are upfront about that.
- Where
- Doleham (TN35)
- Region
- East Sussex
- Guarantee
- 12 months on our workmanship
- Quotes
- A fixed quote before we start
- Phone
- 01277 525 020
- Last updated
- 3 November 2026
Towns and villages near Doleham
Other services in Doleham
From enquiry to sign-off
Working in a building that stays open takes some planning. The work area is signed and kept contained, keep walkways clear and work section by section so the rest of the building stays in use. Jobs in and around smaller places like Doleham are normally planned as a single visit, so we ask for photographs and rough sizes first. That way the right products come on the day.
- We start with your penetration schedule, drawings or specification.
- We plan the sequence of floors, risers and voids with you.
- We compare every service penetration with its tested detail before sealing.
- Foam, ordinary sealant and debris come out first.
- The specified backing and sealant go in to depth and are finished neatly.
- Anything outside the detail is reported to you rather than sealed.
Before we start on site
- Flag any permit to work we’ll need
- Send any specification or drawings in advance
- Let building users know which areas are affected
Getting a fixed quote
We quote a fixed sum against the scope you give us, so you know the figure before anyone is on site. To start the process, speak to us on 01277 525 020 or email drawings and photos.
Read more
Compartment walls and floors in Doleham
Central London is about 50 miles from Doleham. Tenant changes on commuter-belt business parks mean regular fit-outs, and new services through compartment walls. Approved Document B is the English guidance that covers fire stopping around openings and penetrations. Its BS 476 references are being withdrawn from 2 September 2029, with BS EN 13501-2 classification taking over, subject to transitional arrangements. Either way, we install the specified product to its tested detail.
Offices at parks like Wheel Farm Business Park, 1.7 miles to the west of Doleham, are re-cabled with each new tenant, and compartment walls need sealing afterwards to the tested detail. Older community buildings such as The Parish Church of St George that have been rewired or given new heating can have service gaps through walls worth checking against the specification. Theatres, wards and plant rooms at sites like Conquest Hospital, 2.9 miles to the south-west of Doleham, all have compartment walls crossed by services.
Doleham is about 4 miles north-east of Hastings, in East Sussex. If you’re looking for fire stopping in Doleham, we can help, as we do across East Sussex. Doleham is one of 308 places in East Sussex on our list for service penetrations. There’s a separate page for Brighton, roughly 33 miles from Doleham.
Postcode districts covered here: TN35. Streets here include Doleham Lane and Doleham Close. Sites close to Doleham are covered too, including Three Oaks (1 mile south-east), Broadland Row (2 miles north-east), Broad Street (2 miles east), Broad Oak (2 miles north) and Udimore (3 miles north-east). Nearby towns on our patch include Hastings (4 miles south-west), Bexhill-on-Sea (8 miles south-west), St Leonards (5 miles south-west), Hastings Old Town (4 miles south), Belmont (4 miles south) and Langney (15 miles south-west).
Near you in Doleham
Doleham has its own railway station: Doleham station. A little further out are Conquest Hospital (2.9 miles south-west) and Barn Theatre and Museum (1.8 miles south-west). Green spaces nearby include Church Wood and Robsack Wood.
Looking after the joints
Sealant joints are maintenance items, and how long they last depends on how they’re treated. Our advice:
- Don’t let anyone top up a fire seal with the wrong product
- Put resealing into every M&E and fit-out package
- Arrange inspection before areas are covered up
- Check risers and ceiling voids after each round of works
Store the specified product details somewhere the next contractor can find them. It makes later repairs much easier to match.
Regular walk-rounds of service areas are worth the time. Catching a damaged seal early keeps the fix small compared with dozens found at once.
Why it’s worth doing now in Doleham
Fire stopping is a regular point raised at inspections and handover. Finding unsealed or improvised openings late can hold up a programme. Converted and older buildings near places like Doleham tend to move, and aged sealant cracks. The right product, sized to the joint, copes much better.
The product called for affects the cost, as does the preparation each joint needs, such as cutting out, priming or new backing rod. Access, phasing and site rules also count.
Why appoint us
- Health and safety: CHAS accredited
- Clear, fixed quotes
- Failed material removed, not covered up
- Workmanship guaranteed for 12 months
Take a look at what affects the cost and how we’re accredited.
Should maintenance staff do it?
Using site staff can make sense for a small touch-up, but anything bigger is another matter: a specialist brings efficiency, a consistent finish and a 12-month guarantee.
For most general trades, sealant is a sideline. A specialist prepares properly, controls joint depth and picks a product with the right movement class, which is what makes a joint last.
Honest limits
Honesty saves time and money. Fresh joints won’t solve:
- Issuing fire ratings or certificates for seals
- Walls or floors that aren’t fire-resisting to begin with
- Writing the fire-stopping specification
Not sure which it is? You can call 01277 525 020 or use the quote form and we’ll tell you honestly.
What we seal
- Linear gaps at wall heads
- Small duct penetrations where the tested detail allows
- Pipe penetrations
- Joints between fire-resisting walls and floors
- Cable penetrations
- Service gaps in risers
Questions about Doleham
Is Doleham too small for you to travel to?
No. Small places get the same service as large ones. London and every South East county are within our area. Where we can, we group nearby jobs to make the most of each trip.
What does the BS 476 change mean for fire-rated sealant in Doleham?
Approved Document B loses its BS 476 references from 2 September 2029, and BS EN 13501-2 becomes the route, subject to transitional arrangements. The designer or fire engineer sets the specification, and we install the product to the manufacturer’s tested detail.
How long does a job like this take?
The duration is planned around your programme and the access we’re given. We’ll give you an estimate of time on site when we quote.
Can you work to our specification?
Yes. We follow the specification, along with the manufacturer’s installation guidance, and we raise anything unclear before work begins.
Is it fine to apply new sealant on top of old?
No. Sealing over old material is one of the classic causes of early joint failure, so it all comes out first.
What if there’s asbestos in the old mastic?
Some older mastics, especially in pre-2000 buildings, can contain asbestos. Before we disturb old sealant in an older building, we ask to see the asbestos register or survey, and if asbestos is suspected, work stops until it’s tested. Removing asbestos is a job for asbestos specialists, not us.
How much does the work cost?
Each job is quoted on its own details. To get one, ring 01277 525 020 or email drawings and photos.