
Fire Stopping in Rock-a-Nore
Fire-rated and intumescent sealing of service penetrations and linear gaps in Rock-a-Nore and across East Sussex. CHAS accredited and fully insured, with a 12-month guarantee.
- Unsealed joints where partitions meet the slab
- Fire seals cut back for extra cables and never reinstated
- Builders’ foam or ordinary silicone in compartment walls
Fire stopping for Rock-a-Nore sites
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
How we handle fire stopping in Rock-a-Nore
The test standards are BS EN 1366-3 for penetration seals and BS EN 1366-4 for linear joints, with results classified under BS EN 13501-2. That classification, such as EI 60 or EI 120, belongs to the product in its tested arrangement. Reproducing the tested arrangement on site is the part we take care of. The enquiries we see most involve damaged fire seals in risers and voids and openings left by services added after handover, on joints between fire-resisting walls and floors, cable penetrations and pipe penetrations. One point of contact handles commercial sealant work in Rock-a-Nore from the first photographs to the final walk-round, whether it’s one building or several.
Buildings in a smaller place such as Rock-a-Nore that need fire-rated sealing are typically schools, care homes, surgeries, small offices and flats over shops. Specified fire-rated sealant goes around new services there, built to match the manufacturer’s detail.
The 12-month guarantee covers our workmanship: the preparation, the sealing and the tooling. Damage, later alterations by others and movement beyond what the joint was designed for sit outside it.
- Where
- Rock-a-Nore (TN34, TN35)
- Region
- East Sussex
- Guarantee
- A 12-month guarantee
- Price
- Quoted before any work starts
- Call
- 01277 525 020
- Updated
- 3 November 2026

Do you need fire stopping in Rock-a-Nore?
Physical damage is another reason seals stop doing their job. Seals get knocked during maintenance, cut back to add a cable or pulled out when services are swapped.
Look out for the following:
- Unsealed joints where partitions meet the slab
- Unsealed openings around new pipes and cables
- Hidden openings found during inspections
- Penetration schedules that need working through
On estates like Ivyhouse Industrial Estate, which lies north of Rock-a-Nore, the wall between office and warehouse is often fire-resisting, and cables through it need the specified seal.
Before you book anyone
- Their plan for phasing and protecting the area
- Health and safety accreditation such as CHAS
- Whether their applicators hold CSCS cards
- Proof of insurance
General trades versus a specialist
The visible bead is only part of the job. Backing rod, primer where specified and a joint designed to move with the building are where general trades tend to cut corners.
Redoing a failed joint normally costs more than getting it right at the outset, since all of it has to come out and the faces be cleaned back again. For that reason, many FMs and contractors use a sealant specialist from the outset.
Nearby places to Rock-a-Nore
Also in Rock-a-Nore
Your questions answered
Would you work within a site like Conquest Hospital?
Yes, provided the work is planned with the site’s estates team. We follow the site’s permits, sign-in and infection-control procedures in every area.
Will you take on work at estates like Ivyhouse Industrial Estate, close to Rock-a-Nore?
Yes. Our area takes in Rock-a-Nore and its surroundings, with estates and business parks such as Ivyhouse Industrial Estate included. Send details of the unit and the work through our quote form for a quick quote.
Is the BS 476 change in 2029 relevant to fire stopping?
From 2 September 2029, Approved Document B in England drops its references to BS 476 classes. After that, the European classification under BS EN 13501-2 is the route. Your designer will choose products with the right evidence.
Is fire stopping in Scotland covered by different guidance?
Building standards in Scotland are separate from England’s, and England uses Approved Document B. Either way, we install the specified sealant to its tested detail.
Do you approve fire stopping for building control?
No. Sign-off isn’t ours to give, and we don’t hold a third-party installer certificate. Our part is fitting the specified product to its tested detail, and any records you need can be confirmed with the quote.
Is it fine to apply new sealant on top of old?
No. Overlaying old sealant is a frequent cause of early failure, so everything comes out first.
Do you offer coloured sealant?
In many cases, yes. Sealants are made in a wide range of standard colours, and matching to RAL references or nearby finishes is commonly requested. We confirm what’s available for the specified product when we quote.
Quoting for work in Rock-a-Nore
Sealant work doesn’t have a standard rate, since sites vary so much. What we look at:
- Location, for remote and island sites
- How accessible the joints are
- Specialist products, such as fire-rated or hygienic sealants
- Working within restricted access windows
Small jobs and large programmes are priced from the same things: scope, access, product and programme. Call for a quote, and you will have a fixed figure to work with.
Before you send an enquiry
A few photographs plus some basic facts will normally do. It helps to include:
- Clear photographs of the problem areas
- The product your specification calls for
- The postcode of the building
- Any dates the work must fit around
A handful of photographs and a postcode is the fastest way to a quote. Send them through the quote form, or call 01277 525 020 or email us if you’d rather talk the job through.
For managing agents and facilities managers
Hospitality, education, healthcare, office and retail clients come to us directly as well. We plan around the way the building is used, so the building keeps working while we do.
We take on planned maintenance as well as one-off repairs: working through a building or an estate in stages that fit your budget. Rock-a-Nore can form part of a wider programme across East Sussex.
Our process
Occupied buildings need a little choreography. The work area is signed and kept contained, keep walkways clear and move on in phases so staff and visitors can carry on around us. If neighbouring businesses or buildings around Rock-a-Nore need work too, visits can be combined. Tell us your site hours and we will plan around them.
- We read the specification, drawings or penetration schedule you send and raise any questions before we price.
- Every penetration is compared with its detail: wall or floor type, service, gap size and depth.
- Anything that doesn’t belong in the opening, such as expanding foam or general-purpose filler, is removed.
- Mineral wool or other backing goes in wherever the detail asks.
- Fire-rated or intumescent sealant is gunned in to the specified depth, then tooled.
- Openings that need a collar, wrap, batt or other product are flagged to you rather than filled with sealant.
Preparing the site
- Flag any permit to work we will need
- Warn occupants and staff about the work
- Send any specification or drawings in advance
Quotes
Let us know the site, the scope and your timescale, and we will put a fixed quote together. To get it moving, call 01277 525 020 or send details through our quote form.
Read more
Fire-rated sealing for Rock-a-Nore buildings
Eight care or nursing homes sit less than 2 miles from Rock-a-Nore. Care settings depend on compartmentation, so service penetrations made during maintenance or refurbishment need sealing with the specified product. We install fire-rated sealant to the tested detail where it is specified. Rock-a-Nore is about 54 miles from central London. Offices around the capital are refitted often, and the cabling that follows can breach fire-resisting walls.
At a healthcare site like Conquest Hospital, 2.3 miles to the north-west of Rock-a-Nore, new services through compartment walls are a constant, and each needs the specified seal. Hotels such as Chatsworth Hotel (0.8 miles west of Rock-a-Nore) rely on fire-resisting walls between bedrooms and corridors, and refits that add services leave penetrations to seal where fire-rated sealant is specified.
Rock-a-Nore is about 2 miles south-east of Hastings, in East Sussex. Commercial clients in Rock-a-Nore use us for work on service penetrations. Rock-a-Nore is one of 308 places we cover in East Sussex for service penetrations. Brighton is covered too, around 32 miles from Rock-a-Nore.
Anyone looking for fire stopping in TN34 and TN35 gets the same process as the rest of our area: send details, get a quote, we seal, guaranteed. Streets here include Crown Lane, Croft Road and Queens Road. Close to Rock-a-Nore, our area also takes in Hastings Old Town (1 mile north-west), Belmont (1 mile north-west), America Ground (1 mile west), Blacklands (1 mile north-west) and St Helen's (1 mile north-west). Further afield, our area takes in Eastbourne (14 miles west), Bexhill-on-Sea (6 miles west), Hailsham (15 miles west), Polegate (15 miles west), Upper Horsebridge (15 miles west) and Langney (13 miles west).
Near you in Rock-a-Nore
Around Rock-a-Nore, our work takes us to commercial buildings near The Dolphin pub, Linton Gardens and Roman Catholic Church of St Mary Star of the Sea and the streets around them. Also close by are William Parker Sports College (1.8 miles north-west) and University School (1 mile west). The closest station to Rock-a-Nore is Ore station, about 0.8 miles north. Nearby you will also find Flower Makers Museum (less than half a mile west) and Priory Meadow Shopping Centre (0.6 miles west). Open spaces near Rock-a-Nore include Church Wood and Robsack Wood.
What happens if it’s left?
Inspections and handover checks often pick up fire stopping. Finding unsealed or improvised openings late can hold up a programme which is why earlier is better. A failed joint lets water into a building whatever its size. Catching it early means a reseal rather than repairs.
There’s no price list, because the scope varies so much from one building to the next. Call for a quote.
Why us?
- Commercial sealant work since 2005
- One contact handling all your sites
- Joints cleaned back to sound surfaces
- Health and safety: CHAS accredited
Take a look at our cost guide or how we’re accredited.