Camber fire stopping
Planning work on a service penetration in Camber? We look at it, seal it with the right product and hand it over with a 12-month guarantee.
- Openings left by services added after handover
- Head-of-wall gaps with no fire seal
- Hidden openings found during inspections
Fire stopping across Camber
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
What we’re called out for in Camber
Damage plays a part too. Seals get knocked during maintenance, cut back to add a cable or pulled out when services are swapped.
Things that usually lead to an enquiry:
- Improvised or mixed-product fire seals
- Penetration schedules that need working through
- Expanding foam used as fire stopping
- Unsealed penetrations discovered above suspended ceilings
For a building such as St Thomas the Apostle, new heating or data runs are the usual reason penetrations need sealing.
What your quote should include
- How long is the guarantee, and what does it include?
- Proof of insurance
- Will failed sealant be removed rather than covered?
- Their plan for phasing and protecting the area
How we handle fire stopping in Camber
Opened ceilings and riser doors often reveal service openings nobody sealed. Where the walls and floors already have a fire-stopping specification, we can work to it. With no specification in place, the first step sits with your designer or fire engineer, not with us. The enquiries we see most involve seals disturbed by maintenance and left open and penetration schedules that need working through, on cable penetrations, small duct penetrations where the tested detail allows and linear gaps at wall heads. One point of contact handles commercial sealant work in Camber from the first photographs to the final walk-round, for single jobs and planned programmes alike.
Around smaller places like Camber, penetration seals come up in schools, halls, pubs with rooms, care homes and farm buildings used as offices. If sealant is what the specification names, we install it around the services exactly as the maker’s detail sets out.
Our 12-month guarantee is about workmanship, not wear and tear. Sealant wears with time, and movement, weather, cleaning and use decide how fast, so we spell out the cover before we begin.
- Where
- Camber (TN31)
- Region
- East Sussex
- Cover
- A 12-month guarantee
- Price
- Quoted before any work starts
- Telephone
- 01277 525 020
- Updated
- 3 November 2026
What sets the cost
Your fixed quote is built from the real scope. It allows for:
- Joint width, depth and condition
- Removal of failed or old sealant
- Whether the work must be split into stages
- Travel to remote or island sites
The specified product makes a difference, as does the preparation each joint needs, from cutting out to priming and backing rod. Access, phasing and site rules also count.
What to include in your enquiry
We can often quote from photos and a few details. It helps to include:
- Access details, including height
- What the building is and how it’s used
- The asbestos register, for older buildings
- Photos of the joints, close up and from further back
Photos, drawings or a schedule of the joints are often enough for a fixed quote. If the job needs a look first, we’ll arrange a site visit.
Our process
At the end of each section, the masking comes off, the area is cleaned and every joint is checked. If an area should be left alone while the sealant cures, we say how long and put signs out. Smaller jobs around Camber can be grouped with others nearby, which keeps travel down. A fixed quote is given before anything starts.
- First we go through the drawings, schedule or specification for the seals and raise any questions before we price.
- On site, each opening is checked against the tested detail it is meant to follow.
- Unsuitable fillers and loose debris are taken out of each opening.
- Mineral wool or other backing goes in wherever the detail asks.
- We apply the specified sealant to the depth and around the services as the detail shows.
- Openings that need a collar, wrap, batt or other product are flagged to you rather than filled with sealant.
Preparing the site
- Tell staff and tenants when we’ll be in
- Send asbestos survey details if the building is pre-2000
- Point out any areas we must not close
Ask for a quote
A handful of photographs and a postcode is the fastest way to a quote. Upload them with the quote form, or phone 01277 525 020 or email drawings and photos to discuss it first.
Read more
Questions we’re asked in Camber
How does the move away from BS 476 affect penetration seals in Camber?
From 2 September 2029, Approved Document B drops its BS 476 references in favour of BS EN 13501-2 classification, with transitional arrangements. Our part doesn’t change: the specified product, to its tested detail.
Can you work at a site such as Churchfields Industrial Estate, by Camber?
Yes. Our area takes in Camber and its surroundings, with estates and business parks such as Churchfields Industrial Estate included. Send details of the unit and the work through our quote form for a quick quote.
What do you charge?
It depends on the job: quantities, access, the product and any phasing. Call for a fixed quote.
Do you cover Camber?
Yes. Camber falls within our area, and the simplest way to start is to ring 01277 525 020 or use the quote form.
How do I request a quote?
You can use the quote form on this site; alternatively, speak to us on 01277 525 020 or email the details over. Include photographs or drawings if you have them.
When can the area be used after sealing?
We’ll confirm how long the chosen product needs to cure, and flag anything to keep off until it has cured.
Do you seal on top of existing sealant?
No. Overlaying old sealant is a frequent cause of early failure, so everything comes out first.
When something else is needed
Before quoting, we check that sealant is the right answer. It isn’t the answer for:
- Writing the fire-stopping specification
- Fire risk assessments, a job for a competent assessor
- Gaps in walls that were never built as compartment walls
Not sure which it is? You can call 01277 525 020 or email a schedule or drawings and we will tell you honestly.
What we seal
- Service gaps in risers
- Pipe penetrations
- Small duct penetrations where the tested detail allows
- Cable penetrations
- Joints between fire-resisting walls and floors
- Linear gaps at wall heads
Also in Camber
How the job changes by surface
Small ducts
Ducts are only sealed with sealant where the detail allows it. Dampers and ductwork systems themselves are outside our work.
Cables and cable bundles
Single cables and small bundles are often within a fire-rated sealant’s tested detail. Bundle size, cable type and the space between cables all matter and we work within those limits.
For managing agents and facilities managers
Housing associations and managing agents often need work done across blocks and communal areas. We phase the work so people keep access, and each stage is agreed with your contact.
Whether you’re a managing agent, a property factor or an owner’s representative: send the details, accept a fixed quote, and we carry out and guarantee the work. We can agree access arrangements and keyholder contacts beforehand.
Fire stopping in Camber: the local picture
Fire stopping of openings and penetrations in England falls under Approved Document B. The national BS 476 classes are due to drop out of it from 2 September 2029, leaving the European BS EN 13501-2 route, subject to transitional arrangements. What we install is set by the specification, and it goes in to the tested detail. At about 55 miles from central London, Camber is within reach of the capital. Tenant changes on commuter-belt business parks mean regular fit-outs, and new services through compartment walls.
Where a unit on an estate such as Churchfields Industrial Estate, 1.7 miles to the west of Camber, has fire-resisting walls between offices and warehouse, any new service through them should be sealed to the tested detail.
Camber is about 11 miles north-east of Hastings, in East Sussex. Businesses, contractors and managing agents in Camber use us for work on service penetrations, as part of our coverage of East Sussex. Across East Sussex, 308 places are covered, Camber among them. Sites around Brighton have their own page, roughly 41 miles from Camber.
Business premises anywhere in TN31 are within our area. Streets here include Denham Way, Scotts Acre and Old Lydd Road, and sites on any of them can send details for a fixed quote. Nearby places we also cover include Rye Harbour (1 mile west), East Guldeford (2 miles north-west), Rye (3 miles west), Playden (3 miles north-west) and Houghton Green (3 miles north-west) for service penetrations. Bigger towns within reach include Hastings (11 miles south-west), Bexhill-on-Sea (15 miles south-west), St Leonards (12 miles south-west), Hastings Old Town (10 miles south-west), Belmont (10 miles south-west) and Hollington (11 miles west).
Around Camber
For rail, the closest station is Rye station, roughly 2.9 miles north-west of the centre. Other landmarks nearby include Camber Castle (2.6 miles west) and Rye Castle Museum (East Street) (2.7 miles west). Green spaces nearby include Rye Harbour Nature Reserve and Burnthouse Pen.