East Sussex · England
Commercial sealant contractors in BN8
Sealant work for contractors, FMs and building owners across BN8, from Ringmer, Newick and Barcombe Cross, with a fixed quote before we start.
Mastic and sealant across BN8
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Places in BN8
- Ringmer
- Newick
- Barcombe Cross
- Broyle Side
- East Hoathly
- South Chailey
- North Chailey
- Cooksbridge
- Laughton
- Ripe
- Firle
- Halland
- South Street
- Ashton Green
- Barcombe
- Glynde
- Muddles Green
- Norlington
- Whitesmith
- Barcombe Mills
- Chiddingly
- Founthill
- Glyndebourne
- Hale Green
- Hamsey
- Mount Pleasant
- Shortgate
- Upper Wellingham
- Chailey
- Lewes
- South Malling
- Southover
- Cliffe
- Golden Cross
Sealant work we offer in BN8
- Commercial washroom and wet-area sealing
- Coloured and colour-matched sealant
- Construction and new-build mastic
- Industrial and floor joint sealing
- Mastic sealing for building owners and managing agents
- Fire-rated sealing and fire stopping
- Commercial sealant contractors
- Expansion and movement joint sealing
- Facade and window perimeter sealing
- See all services
Tell us what needs doing and your postcode and we’ll come back with a price: call the office on 01277 525 020 or send photos by email.
How commercial sealant contractors works in BN8
Most of the buildings we seal stay open while we’re there. Work is scheduled around the site hours and access windows you give us; phasing keeps some washrooms, kitchens or entrances available while others are done. It’s the same approach in offices, retail units, hotels, schools and healthcare buildings. We work on kitchen worktops and splashbacks, washrooms and tea points and window and door perimeters, and the usual reasons a site gets in touch are gaps behind commercial kitchen worktops and sinks and expansion joints with the sealant torn out.
We bring the products specified for the job, along with primers and backing rod. Joint faces are cleaned back to sound, dry surfaces, primer goes on where the manufacturer specifies it, and each bead is tooled to a neat concave finish.
- You send photos, drawings or a list of the joints and areas involved.
- Next comes a diagnosis and a fixed quote.
- We plan around your site hours and access windows, phasing the work where areas have to stay in use.
- Failed sealant is cut out and each joint cleaned back to sound, dry faces.
- The depth is set, primer is used where the maker calls for it, and the fresh bead is applied and tooled.
- We walk the completed areas with you and sign them off under the 12-month guarantee.
How we quote
What a job costs comes down to the quantity of joints, what has to come out first and the access. Call for a quote when you are ready.
Why appoint us
- A Constructionline member, so easy to vet
- Our applicators hold CSCS cards
- Sealing commercial buildings since 2005
- One number for every site we cover
Getting a fixed quote
Send us photographs, drawings or a joint schedule are often enough for a fixed quote. If the job needs a look first, we’ll arrange a site visit.
What’s near Ringmer
Locally, jobs take us to sites close to The Anchor pub, The Parish Church of St Mary the Virgin and Ringmer Community College and Sixth Form and the streets around them. The nearest railway station is Glynde station, about 2.4 miles south of the centre. Well-known places in the area include Museum of Agricultural Bygones (1.5 miles east) and Lewes Victoria Hospital (3 miles south-west). For a walk, there’s Cliffe Hill and Malling Down.
Commercial premises across BN8
Shop fits, office refurbishments and hotel refits in towns such as Lewes, South Malling and Southover all leave joints that need sealing. Where the joint is on show, a colour that suits the finish is part of the job.
London and the South East are among the drier parts of the UK, though outside work in BN8 still waits for dry faces, and cold mornings bring frost and condensation on steel and glass.
Ringmer: For premises near Glynde station (2.4 miles south of Ringmer), footfall is part of the plan: work is phased so shops and offices keep trading. Industrial estates such as Diplocks industrial estate, less than half a mile north-east of Ringmer, have offices, trade counters and welfare areas whose sealant ages like any other building’s.
Doing it in-house
A short, simple internal joint is often within reach of a maintenance team. Where it goes wrong is preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.
There’s also the paperwork. Many sites expect CSCS cards, RAMS and proof of insurance, and we will confirm the paperwork you need with the quote.
Common problems we fix in BN8
No sealant joint is permanent. How long one lasts depends on the movement it takes, its exposure to sun and weather, the cleaning regime, the traffic and the product itself. In commercial buildings those factors tend to act together, which is why regular inspection pays.
Look out for the following:
- Damp patches where an external joint has failed
- A top-up bead over failed sealant, now lifting
- Sanitary sealant that has gone black and patchy
- Expansion joints with the sealant torn out
Surface by surface
Fire-rated seals where specified
Where the specification calls for fire-rated or intumescent sealant around service penetrations or linear gaps, we install it to the product’s tested detail. Fire-stopping design and sign-off sit with the designer, fire engineer or building control.
Facade and cladding joints
Panel joints on cladding and rendered facades open and close with the temperature. They need a sealant with the right movement capability, laid at the right depth. We confirm the access in place before we quote.
When it isn’t the sealant
Our job is the joint, not everything around it. Sealant alone won’t deal with:
- Water from a services leak rather than a joint
- Faulty windows rather than failed perimeter sealant
- Old mastic that tests positive for asbestos
Why deal with it now?
Before budgeting for new frames, cubicles or worktops, check whether it’s just the sealant. In many cases the element is fine and only the seal around it has given up. Resealing typically costs far less than renewal.
What your quote should include
- Is the sealant right for the movement and the substrate?
- Is depth set with backing rod, or bond-breaker tape in shallow joints?
- What site paperwork they can supply
- Will CSCS-carded applicators be on site?
BN8: questions and answers
Do you cover BN8?
Yes. We take on work across BN8, and the same phone number covers every area.
How long does a job like this take?
That varies with the scale of the job, though a typical visit normally takes as long as the agreed scope needs, from a single visit to a programme spread over several weeks. Larger or phased jobs take longer, and we will give you a timescale with the quote.
How long will the new sealant last?
It depends on movement, UV and weather, cleaning, traffic and the product. Sealant joints are maintenance items, so inspect them regularly.
Is your work guaranteed?
It’s backed by our 12-month guarantee. Should anything we did fail within that period, let us know.
Can one contractor look after sealant on all our buildings?
Yes, we can. Give us the sites and the scope at each, and we’ll put together a fixed quote and a sensible order of work.
Does the weather affect the work?
It can, for external work. Wet joints and cold, damp or frosty conditions stop the sealant bonding properly, so external work may be moved if conditions aren’t right. Internal work is far less affected.
Can areas stay open during the work?
Most of the buildings we work in stay occupied. Only the area being sealed is closed, and the sequence is agreed in advance, until its cure time has passed.