Fire stopping in Salehurst
Our CSCS-carded applicators take on fire-rated and intumescent sealing of service penetrations and linear gaps in Salehurst. Send photos or drawings for a fixed quote.
- Fire stopping installed outside its tested range
- Old intumescent sealant that has split away
- Hidden openings found during inspections
Fire stopping for Salehurst sites
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Fire stopping in Salehurst
For main contractors, our fire stopping package slots in after the M&E trades have finished in an area. To price a package, give us a call on 01277 525 020 or send details through our quote form with the schedule or marked-up drawings alongside the manufacturer’s details. Tell us what records you need and we will confirm with the quote. We work on linear gaps at wall heads, pipe penetrations and cable penetrations, and what we are called in for most is non-fire-rated filler around services and improvised or mixed-product fire seals. Looking for mastic applicators who cover Salehurst? We’ve been sealing commercial buildings since 2005, with CSCS-carded applicators.
Smaller places such as Salehurst still have buildings with fire-resisting walls and floors: schools, halls, care homes and commercial conversions. If sealant is what the specification names, we install it around the services exactly as the maker’s detail sets out.
The 12-month guarantee is for workmanship rather than wear and tear. How long a sealant joint lasts depends on movement, exposure, cleaning and use, so we spell out the cover before we begin.
- Location
- Salehurst (TN32)
- Region
- East Sussex
- Guarantee
- 12 months on our workmanship
- Quote
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Updated
- 3 November 2026
Do you need fire stopping in Salehurst?
Damage plays a part too. Maintenance work can knock a seal, cut it back for an extra cable or remove it with an old pipe, and the repair is often skipped.
If one of these sounds familiar, it’s time for a closer look:
- Non-fire-rated filler around services
- Openings left by services added after handover
- Penetration schedules that need working through
- Head-of-wall gaps with no fire seal
Schools such as Salehurst Church of England Primary School often have new data and services installed during holidays, and penetrations through fire-resisting walls should be checked afterwards.
Before you book anyone
- How the existing material will be dealt with
- Which product they’ll use, and why it suits the joint
- How the joint faces will be prepared and primed
- Their plan for phasing and protecting the area
Commercial clients in Salehurst
When you manage a building on behalf of an owner, you need clear quotes and clear reporting. We quote a fixed sum, confirm the scope and walk the finished work with you or your representative.
Planned maintenance programmes are welcome: working through a building or an estate in stages that fit your budget. Sites in Salehurst can sit alongside others in a wider programme.
Should maintenance staff do it?
A short, simple internal joint is often within reach of a maintenance team. Where it goes wrong is preparation: sealing over old material, sealing onto damp or dusty surfaces, or a product that can’t take the movement.
Redoing a failed joint typically costs more than getting it right at the outset, since all of it has to come out and the faces be cleaned back again. That’s why many clients bring in a specialist from the beginning.
On site: what to expect
We begin with a short walk round with whoever looks after the building, to confirm the scope, the order of work and any areas we must keep clear. Then we strip out anything that has failed, prepare every joint and seal it. Jobs in and around smaller places like Salehurst are normally planned as a single visit, so photographs and measurements up front really help. That way the right products come on the day.
- The specification and schedule come first, so we know which details apply.
- We plan the sequence of floors, risers and voids with you.
- We compare every service penetration with its tested detail before sealing.
- Foam, ordinary sealant and debris come out so the seal starts clean.
- Backing and fire-rated sealant are installed to the detail and tooled.
- We tell you about openings that need a different product.
Before we start on site
- Make sure the joints can be reached
- Warn occupants and staff about the work
- Send any specification or drawings in advance
Get a fixed quote
If there’s a specification, drawings or a tender package, send it with your enquiry, and we will price against exactly what is specified. For smaller jobs, photographs and a description will do.
Advice
Towns and villages near Salehurst
Other services in Salehurst
Penetration seals near Salehurst
Salehurst lies roughly 43 miles out from central London. Office refits around the commuter belt bring new cabling through fire-resisting walls, and the gaps need sealing with the specified product. In England, Approved Document B covers fire stopping of openings and penetrations. References to the older BS 476 classes are being removed from it from 2 September 2029, after which the European classification, BS EN 13501-2, is the route, subject to transitional arrangements. We install whatever has been specified, to the product’s tested detail.
Halls and meeting rooms at places like The Parish Church of St Mary sometimes gain new services, and any compartment wall crossed needs the specified seal. At a healthcare site like Ticehurst House Hospital (5.6 miles north-west of Salehurst), new services through compartment walls are a constant, and each needs the specified seal.
Salehurst is about 9 miles north of Hastings, in East Sussex. Any commercial site in Salehurst is covered. Across East Sussex, 308 places are covered, Salehurst among them. Sites around Brighton have their own page, about 29 miles away.
Postcode districts covered here: TN32. Sites close to Salehurst are covered too, including Northbridge Street (1 mile west), Robertsbridge (1 mile south-west), John's Cross (2 miles south), Mountfield (3 miles south) and Oxley's Green (4 miles south-west). A short drive away, we cover Hastings (9 miles south), Bexhill-on-Sea (10 miles south), Hailsham (13 miles south-west), Crowborough (15 miles west), St Leonards (10 miles south) and Hastings Old Town (10 miles south-east).
Near you in Salehurst
In Salehurst, that means premises near The Salehurst Halt Public House and Robertsbridge Community College and the streets around them. For rail, the closest station is Robertsbridge station, about 1 mile south-west. Well-known places in the area include Ticehurst House Hospital (5.6 miles north-west).
Your questions answered
How does the removal of BS 476 from Approved Document B affect fire-rated sealing in Salehurst?
Approved Document B loses its BS 476 references from 2 September 2029, and BS EN 13501-2 becomes the route, subject to transitional arrangements. Whichever applies, we install the specified product to its tested detail; the specification is for the designer to set.
Can you take on a job at a hospital such as Ticehurst House Hospital?
Yes, hospitals are one of the sectors we cover. Before anything starts, the estates team agrees permits, inductions and infection-control measures with us.
Are you CHAS accredited?
Yes. Mastic Doctor is CHAS accredited and a Constructionline member, which helps with supplier vetting.
Do you offer coloured sealant?
That depends on the product. Some ranges offer many colours, others very few, so the available colours are confirmed with the quote.
When can the area be used after sealing?
The product and site conditions decide that. Some products skin over quickly but need longer to cure fully, and we confirm it before leaving site.
When is resealing likely to be due?
There isn’t a single answer, since movement, weather, cleaning and use all affect it. Regular checks let you plan resealing before leaks or damage.
Does the weather affect the work?
It can, for external work. Sealant won’t bond properly to a wet or frosty joint, so external work may be moved if conditions aren’t right. Internal work is far less affected.
Cost factors for service penetrations
What shapes the price:
- The total length or number of joints
- Whether the work must be split into stages
- How accessible the joints are
- Whether old sealant has to be cut out first
Larger quantities, tricky access or phasing all shape the price. So do site requirements such as inductions and permits, along with the time of year for external work.
Before you send an enquiry
A few photographs plus some basic facts will normally do. It helps to include:
- What the building is and how it’s used
- Drawings or a marked-up plan, if available
- The product your specification calls for
- When you need the work done
A handful of photographs and a postcode is the fastest way to a quote. Send them through the quote form, or phone 01277 525 020 or email us to discuss it first.
When something else is needed
We check first that sealant really is the fix. It isn’t the answer for:
- Fire doors, dampers or other fire safety equipment
- Openings that need collars, wraps, batts or boards rather than sealant
- Issuing fire ratings or certificates for seals
Not sure which it is? You can speak to us on 01277 525 020 or email drawings and photos and we’ll tell you honestly.
Where we work in Salehurst
- Service gaps in risers
- Pipe penetrations
- Joints between fire-resisting walls and floors
- Small duct penetrations where the tested detail allows
- Linear gaps at wall heads
- Cable penetrations