
Fire Stopping in Plumpton Green
Planning work on a service penetration in Plumpton Green? We assess it, carry out the work and guarantee our workmanship for 12 months.
- Expanding foam used as fire stopping
- Old intumescent sealant that has split away
- Improvised or mixed-product fire seals
Fire stopping across Plumpton Green
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
About our fire stopping in Plumpton Green
Every service that crosses a compartment wall or floor leaves an opening, and that opening needs sealing to hold back fire and smoke. Our part is installing fire-rated and intumescent sealant at those openings and along linear gaps, where the specification calls for it. We work to the product’s tested detail for every seal, not a rule of thumb. If you have fire stopping installed outside its tested range and non-fire-rated filler around services, we can help, on pipe penetrations, linear gaps at wall heads and service gaps in risers alike. Searching for sealant specialists in Plumpton Green? We’ve been sealing commercial buildings since 2005.
A job near Plumpton Green is usually planned around one visit, so send the specification and photographs first. We install to the specification and the manufacturer’s guidance, leaving design and sign-off with the designer and building control.
Work we carry out comes with a 12-month guarantee. Should something we installed fail, give us a call on 01277 525 020 or send details through our quote form and we will come back to it.
- Location
- Plumpton Green (BN7)
- Wider area
- East Sussex
- Cover
- A 12-month guarantee
- Quote
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026

Our process
Where the site stays busy, we agree a sequence with your contact so the disruption stays in one area at once. Each area is protected, prepared and sealed before we move to the next. For a building around Plumpton Green, tell us how to find it and who will meet us. Add it to your enquiry and we’ll build it into the plan.
- We ask for the product and detail your designer has specified.
- We sort the openings by the detail each one needs.
- Improvised fillers and failed sealant are removed.
- Where the detail needs backing, it goes in at the stated depth.
- We gun the sealant in to the specified depth around each service and tool it.
- We walk the completed areas with you and confirm the records agreed at quote stage.
Preparing the site
- Point out parking and an unloading spot
- Let us know about inductions and permits
- Clear stock, furniture or equipment away from the joints
Quotes
Every job follows the same four steps: send details, get a quote, we seal, guaranteed. The first step is to speak to us on 01277 525 020 or email the details over with what you know.
Advice
Work for main contractors and building owners
Hospitality, education, healthcare, office and retail clients book us directly too. We plan around the way the building is used, so the building keeps working while we do.
When you manage a building on behalf of an owner, you need clear quotes and clear reporting. You get a fixed quote, an agreed scope and a walk round at the end, plus a 12-month guarantee.
Questions we are asked in Plumpton Green
Can you work around term dates at a campus such as University of Sussex?
Yes, holiday working periods are the norm on campus jobs. Any paperwork you need, from RAMS to our insurance certificate and CSCS details, is confirmed with the quote.
Can you work on a hospital site such as St Francis Hospital?
Yes, provided the work is planned with the site’s estates team. Before anything starts, the estates team agrees permits, inductions and infection-control measures with us.
What about RAMS and site documents?
Each site asks for different documents, so tell us what you need and we’ll confirm it when we quote.
Which standards are fire seals tested to?
In short, BS EN 1366-3 and 1366-4 are the fire tests and BS EN 13501-2 is how results are classified. EI 60 means integrity and insulation for 60 minutes in the tested arrangement and the installation has to match the test.
How do we ask for a quote?
There are four steps: send details, receive a fixed quote, we carry out the work, and it’s guaranteed. The first step only needs photos and a postcode.
Are you members of a third-party fire-stopping installer scheme?
No. We don’t hold a third-party fire-stopping installer certificate. We are CHAS accredited and a Constructionline member, and our applicators are CSCS-carded. Where a client or main contractor requires a scheme member, we will say so straight away rather than waste your time.
How long do sealant joints last?
It depends on movement, UV and weather, cleaning, traffic and the product. Sealant joints are maintenance items, so inspect them regularly.
Doing it in-house
For most general trades, sealant is a sideline. A specialist brings correct preparation, depth control with backing rod and a product suited to that particular joint.
There’s also the paperwork. Main contractors and clients often ask for CSCS cards, RAMS and insurance details, and our CSCS-carded applicators are used to working under those rules.
Towns and villages near Plumpton Green
Also in Plumpton Green
What we are called out for in Plumpton Green
On a busy project, programme pressure can mean fire stopping is rushed or left to whichever trade is closest. That is when untested combinations creep in and later need putting right.
Most enquiries start with one or more of the following:
- Improvised or mixed-product fire seals
- Unsealed openings around new pipes and cables
- Fire sealant pulled out of the opening
- Snag lists that include open service penetrations
In a building such as All Saints, any service penetration through a fire-resisting wall should be sealed to the specified detail.
Questions to ask before you book
- Health and safety accreditation such as CHAS
- The terms of the workmanship guarantee
- Their plan for phasing and protecting the area
- Whether primer will be used where the manufacturer specifies it
Honest limits
We check first that sealant really is the fix. It isn’t the answer for:
- Large openings beyond what any sealant detail covers
- Reviewing a building’s overall fire safety
- Writing the fire-stopping specification
If you’re not sure, just phone 01277 525 020 or email drawings and photos and we’ll give you a straight answer before you book.
Joints and surfaces we work on
- Pipe penetrations
- Cable penetrations
- Small duct penetrations where the tested detail allows
- Service gaps in risers
- Linear gaps at wall heads
- Joints between fire-resisting walls and floors
What affects the price in Plumpton Green
These are the things that shape the price:
- Travel to remote or island sites
- Site requirements such as inductions and permits
- Access and working height
- How much existing material needs removing
A quote for service penetrations depends on quantities, condition and access, plus any specification you’re working to. Ask us for a fixed quote.
What we need to price the job
It doesn’t need to be a full survey. A few details are enough to get going:
- Access details, including height
- Drawings or a marked-up plan, if available
- When you need the work done
- Asbestos survey details if the building is older
Quotes are fixed against the scope you send, so the cost is agreed before work starts. To start the process, call the office on 01277 525 020 or email drawings and photos.
Fire-rated sealing for Plumpton Green buildings
Plumpton Green is about 39 miles from central London. Office refits around the commuter belt bring new cabling through fire-resisting walls, and the gaps need sealing with the specified product. Approved Document B is the English guidance that covers fire stopping around openings and penetrations. The national BS 476 classes are due to drop out of it from 2 September 2029, leaving the European BS EN 13501-2 route, subject to transitional arrangements. We install whatever has been specified, to the product’s tested detail.
Office fit-outs on sites such as Park Farm Business Park, 1.5 miles north-west of Plumpton Green, add cabling and pipework through fire-resisting walls, and fire-rated sealant goes in where the specification calls for it. Workshops and IT rooms at colleges like Plumpton College (to the south of Plumpton Green) are re-serviced often, leaving penetrations to seal.
Plumpton Green is about 3 miles south-east of Burgess Hill, in East Sussex. Across the BN7 postcode area, it works the same way: send details, get a fixed quote, we seal, and the work is guaranteed. Plumpton Green is one of 308 places in East Sussex on our list. Sites around Brighton have their own page, roughly 8 miles from Plumpton Green.
Business premises anywhere in BN7 are within our area for service penetrations. Streets here include Station Road, West Gate and Riddens Lane, and sites on any of them can send details for a fixed quote. We also cover East Chiltington (1 mile south-east), Streat (1 mile south-west), South Chailey (2 miles east), Ditchling Common (2 miles north-west) and Plumpton (2 miles south). Further afield, our area takes in Seaford (13 miles south-east), Lewes (5 miles south-east), Hailsham (15 miles east), Crowborough (13 miles north-east), Uckfield (7 miles east) and Newhaven (11 miles south-east).
Landmarks near Plumpton Green
In Plumpton Green, that means premises near Chailey School and Fountain Inn. There’s a railway station in Plumpton Green itself: Plumpton station. A little further out are Ditchling Museum of Art + Craft (2.5 miles west) and Clayton Castle (4 miles south-west). Open spaces near Plumpton Green include Bedelands Farm Nature Reserve and Blackcap.