Fire-rated sealing and fire stopping in Friar's Hill, East Sussex
Fire-rated and intumescent sealing of service penetrations and linear gaps across Friar's Hill, by CSCS-carded applicators. CHAS accredited and fully insured.
- Hidden openings found during inspections
- Seals that don’t match their tested detail
- Head-of-wall gaps with no fire seal
Fire stopping near Friar's Hill
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Fire stopping in Friar's Hill, done properly
We should be clear about what we do and don’t do. The designer, fire engineer or building control decides which fire stopping is required; sign-off sits with them too. We fit the specified fire-rated sealant following that specification and the maker’s installation guidance in Friar's Hill and nearby. If you have seals disturbed by maintenance and left open and improvised or mixed-product fire seals, we can help, on joints between fire-resisting walls and floors, linear gaps at wall heads and service gaps in risers alike. Sealant contractors, mastic applicators, sealant specialists: whatever the job title on the order, the work in Friar's Hill is the same: the right product in a properly prepared joint.
For a smaller site near Friar's Hill, we plan to do all the penetrations in one go, with the specification and photographs sent in advance. Design and sign-off belong to the designer or building control; we install what’s specified.
We stand behind the joints we seal with a 12-month guarantee. It covers how we prepared and applied the sealant, and we come back if anything isn’t right.
- Location
- Friar's Hill (TN35)
- Wider area
- East Sussex
- Guarantee
- 12 months on every job
- Quotes
- Quoted before any work starts
- Telephone
- 01277 525 020
- Updated
- 3 November 2026
From enquiry to sign-off
At the end of each section, the masking comes off, the area is cleaned and every joint is checked with your site contact. If an area should be left alone while the sealant cures, we say how long and put signs out. Jobs in and around smaller places like Friar's Hill are usually planned as a single visit, so we ask for photographs and rough sizes first. That way the right products come on the day.
- First we go through the drawings, schedule or specification for the seals and raise any questions before we price.
- On site, each opening is checked against the tested detail it is meant to follow.
- Unsuitable fillers and loose debris are taken out of each opening.
- Mineral wool or other backing goes in wherever the detail asks.
- We apply the specified sealant to the depth and around the services as the detail shows.
- If an opening needs something other than sealant, we tell you instead of improvising.
Before we start on site
- Let us know about inductions and permits
- Clear stock, furniture or equipment away from the joints
- Tell us your opening times and when work is allowed
Get a fixed quote
We quote a fixed sum against the scope you give us, so you know the figure before anyone is on site. To start the process, call the office on 01277 525 020 or email a schedule or drawings.
Read more
Your questions answered
Will you take on work at estates like Ivyhouse Industrial Estate, close to Friar's Hill?
Yes, sites like Ivyhouse Industrial Estate are within our area, along with the rest of Friar's Hill. Photos and a short description are enough for a first look.
Is hospital work, at somewhere like Conquest Hospital, something you do?
Yes, provided the work is planned with the site’s estates team. Before anything starts, the estates team agrees permits, inductions and infection-control measures with us.
Which sealant will you use?
Where there’s a specification, we use the product it names. If not, we choose for the movement, the surfaces and the conditions, in line with the manufacturer’s guidance.
How long before the joints can be used?
The product and site conditions decide that. Some take light use quickly, others need longer to cure, so we’ll confirm the curing time on the day.
Do you have third-party installer accreditation for fire stopping?
No, and we won’t imply otherwise. Some clients require third-party installer schemes even though the law doesn’t, so check your contract first. If it doesn’t require one, we can install the specified fire-rated sealant to its tested detail.
Is BS 476 being phased out?
From 2 September 2029, Approved Document B in England drops its references to BS 476 classes, subject to the Government’s transitional arrangements. After that, the European classification under BS EN 13501-2 is the route. Your designer will choose products with the right evidence.
When is resealing likely to be due?
There’s no fixed lifespan: movement, exposure, cleaning, traffic and the product all play a part. Treat them as maintenance items and inspect them regularly.
For managing agents and facilities managers
Facilities managers want contractors who arrive with the paperwork sorted. Let us know the documents you need (RAMS, insurance certificate, CSCS details) and we’ll confirm them with the quote.
CHAS accredited and a Constructionline member, we’re straightforward to vet for your supplier list. Our insurance certificate can be sent along with the quote.
What affects the price in Friar's Hill
Quotes vary with the job. It mainly depends on:
- Location, for remote and island sites
- Joint width, depth and condition
- Access and working height
- The site’s rules and procedures
Every site prices differently: joint size, product, access and site hours all play a part. A fixed quote follows once we understand the job.
What to include in your enquiry
The more we know, the firmer the quote. When you get in touch, include:
- Anything awkward about access or site hours
- Where the site is, with the postcode
- When you need the work done
- Clear photos of the problem areas
The quickest route to a quote is a few photographs and the site postcode. Upload them with the quote form, or ring 01277 525 020 or email the details over if you’d rather talk the job through.
Why it’s worth doing now in Friar's Hill
It is cheaper to seal service penetrations as each services package finishes than to come back for them later. Openings are visible, access is open and nothing has to be taken down and each detail can be checked as we go. Around Friar's Hill, it’s better to renew all the failing joints at once. Send photographs of each area and we’ll quote for the lot.
The price depends on the quantity of joints, how much old material needs removing and how the joints are reached. Call for a fixed quote when you are ready.
Why appoint us
- Specification-led, product-correct work
- Health and safety: CHAS accredited
- One phone line for London, the South East and Scotland
- 12 months’ guarantee on every job
Read how commercial sealant jobs are priced and how we’re accredited.
Surface by surface
Risers and ceiling voids
Openings above suspended ceilings are easy to miss. We follow your schedule area by area, and note anything we find that isn’t on it.
Small ducts
Some fire-rated sealant details cover small ducts. Bigger ducts and fire-resisting ductwork are normally handled with other products and we flag that rather than guess.
Nearby places to Friar's Hill
What else we do in Friar's Hill
Should maintenance staff do it?
A short, simple internal joint is often within reach of a maintenance team. The usual problems come from preparation: sealing over old material, sealing onto damp or dusty surfaces, or a product that can’t take the movement.
Using site staff can make sense for a small touch-up, but larger jobs are different: a specialist works through quantities efficiently, leaves a consistent finish and backs it with a 12-month guarantee.
Compartments and services around Friar's Hill
At about 53 miles from central London, Friar's Hill is within reach of the capital. Business park offices in the commuter belt are refitted as tenants change, and each fit-out adds services through compartment walls; the gaps need the specified seal. For England, the fire stopping of penetrations is dealt with in Approved Document B. From 2 September 2029, BS 476 references are being taken out of Approved Document B, leaving BS EN 13501-2 classification as the route, subject to the Government’s transitional arrangements. What we install is set by the specification, and it goes in to the tested detail.
For a unit at a site such as Ivyhouse Industrial Estate, which lies south-west of Friar's Hill, new power or data runs between office and warehouse can breach a compartment wall. Holiday works at schools like Guestling Bradshaw Church of England Primary School often leave service openings to seal before pupils return. Halls and meeting rooms at places like St Laurence's Church sometimes gain new services, and any compartment wall crossed needs the specified seal.
Friar's Hill is about 4 miles north-east of Hastings, in East Sussex. Anywhere in TN35, it works the same way: send details, get a fixed quote, we seal, and the work is guaranteed. 308 places across East Sussex fall within our area, Friar's Hill among them. There’s a separate page for Brighton, about 34 miles away.
We cover the TN35 postcode districts. If your site is on Pett Road, Friars Bank and Chapel Lane or close by, send details and we’ll quote for service penetrations. Just outside Friar's Hill, we also work in Guestling Green (1 mile north-west), Guestling (1 mile west), Fairlight (1 mile south), Bachelor's Bump (1 mile south-west) and Pett (1 mile east). Nearby towns on our patch include Hastings (4 miles south-west), Bexhill-on-Sea (8 miles west), St Leonards (4 miles south-west), Hastings Old Town (3 miles south-west), Belmont (3 miles south-west) and Langney (15 miles south-west).
Near you in Friar's Hill
Recent enquiries here include premises near The Hope Public House, Speckled Wood and Buckswood School. The nearest railway station is Three Oaks station, roughly 1.4 miles north-west. Well-known places in the area include Priory Meadow Shopping Centre (3.4 miles south-west) and Conquest Hospital (3.1 miles west). The countryside around Friar's Hill includes Church Wood and Robsack Wood.