Fire stopping in Winton
Fire-rated and intumescent sealing of service penetrations and linear gaps across Winton, carried out by CSCS-carded applicators. CHAS accredited and fully insured.
- Openings found when ceilings come down for a refit
- Snag lists that include open service penetrations
- Fire sealant pulled out of the opening
Fire stopping across Winton
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
On site: what to expect
On arrival, we sign in, go through any site induction and check how permits are handled. Everything around the joints gets protected before anything is cut or cleaned, with the work itself typically taking anything from one day to a planned run of visits, depending on the number of seals and the access. Jobs in and around smaller places like Winton are typically planned as a single visit, so we ask for photographs and rough sizes first. Then the right materials arrive with us.
- We read the specification, drawings or penetration schedule you send.
- On site, each opening is checked against the tested detail it is meant to follow.
- Anything that doesn’t belong in the opening, such as expanding foam or general-purpose filler, is removed.
- We fit the backing the detail asks for, to the stated depth.
- Fire-rated or intumescent sealant is gunned in to the specified depth, then tooled.
- If an opening needs something other than sealant, we tell you instead of improvising.
What we need from you
- Move anything stored against the joints
- Send your site hours and access windows
- Have the specification and drawings to hand
Quotes
Need a figure for a tender or a budget? We will quote against your scope and drawings that you can work with. For a chat about it beforehand, speak to us on 01277 525 020 or email a schedule or drawings.
Advice
How we handle fire stopping in Winton
Opened ceilings and riser doors often reveal service openings nobody sealed. If a specification already covers those walls and floors, we can reseal to it using the product and detail it sets out. With no specification in place, the first step sits with your designer or fire engineer, not with us. If you are dealing with head-of-wall gaps with no fire seal and openings left by services added after handover, we can help, on cable penetrations, linear gaps at wall heads and service gaps in risers alike. A single leaking joint is often how a building in Winton first comes to us: we look at the rest while we’re there and tell you what we find.
Barn and farm-building conversions near places like Winton often combine new partitions with old walls. A penetration seal only performs as tested if product, substrate, service, gap and depth all match the detail.
Building owners and contractors get the same cover: a 12-month guarantee on our workmanship. It doesn’t extend to damage, faults in the building or work by others, and we’re upfront about that.
- Location
- Winton (BN26)
- Region
- East Sussex
- Cover
- 12 months on every job
- Price
- Quoted before any work starts
- Call
- 01277 525 020
- Updated
- 3 November 2026
Penetration seals near Winton
There are a number of hotels within about 2 miles of Winton. Hotels are divided into compartments, and refurbishments that add pipes and cables through bedroom and corridor walls leave gaps to close. Central London is about 49 miles from Winton. Business park offices in the commuter belt are refitted as tenants change, and each fit-out adds services through compartment walls; the gaps need the specified seal.
For a hotel such as Dean's Place Hotel, 0.6 miles south of Winton, penetration seals are worth checking after any refit or services upgrade. For a building at a site such as Berwick Court Farm Business Park, which lies north-east of Winton, a check of penetration seals after each fit-out is good practice. For a building such as Church of St. Andrew, new heating or data runs are the usual reason penetrations need sealing.
Winton is about 3 miles north-east of Seaford, in East Sussex. We cover commercial sites throughout Winton. Winton is one of 308 places in East Sussex on our list. Sites around Brighton have their own page, roughly 13 miles from Winton.
Commercial sites across BN26 are covered. Sites close to Winton are covered too, including Alfriston (1 mile south), Lullington (1 mile south), Milton Street (1 mile east), Dukes Green (1 mile south) and Alciston (1 mile north-west). Bigger towns within reach include Eastbourne (6 miles east), Bexhill-on-Sea (14 miles east), Seaford (3 miles south-west), Lewes (8 miles north-west), Hailsham (6 miles north-east) and Uckfield (11 miles north).
Landmarks near Winton
Locally, jobs take us to sites close to Ye Olde Smugglers Inn, among other places. For rail, the closest station is Berwick (Sussex) station, roughly 1.9 miles north. Nearby you will also find Old Forge Museum (Alfriston) (less than half a mile south) and Arlington Castle (0.5 miles east). Not far away are Firle Beacon.
More services for Winton
What happens if it’s left?
A seal that doesn’t match its tested detail gives false comfort. The fix is to remove it and reinstall to the detail, and doing it once, properly, is cheaper. One visit to deal with every failing joint makes more sense than several trips to a place like Winton, rather than one at a time. Send photos of each area and we’ll quote for the lot.
A quote for service penetrations depends on how many there are, their condition and the access, plus any specification you’re working to. Call for a quote.
Why appoint us
- Sealing commercial buildings since 2005
- CHAS accredited
- Products installed to the manufacturer’s instructions
- Workmanship guaranteed for 12 months
Take a look at what affects the cost and our accreditations and insurance.
Cost factors for service penetrations
These are the things that shape the price:
- Site requirements such as inductions and permits
- Specialist products, such as fire-rated or hygienic sealants
- Phasing around occupants
- How much there is to seal
Whether it’s a single area or a whole estate, the same things set the price: scope, access, product and programme. Call for a quote and we’ll put a fixed figure on it.
Before you send an enquiry
We can often quote from photos and a few details. Please tell us:
- Whether the building will be occupied during the work
- Photos of the joints, close up and from further back
- The postcode of the building
- How the joints are reached, and at what height
A handful of photos and a postcode is the fastest way to a quote. Upload them with the quote form, or give us a call on 01277 525 020 or send details through our quote form if you’d rather talk the job through.
Questions we are asked in Winton
Can you seal penetrations in a hotel in Winton after a refit?
Yes, to the specification and the product’s tested detail. Work is done room by room so the hotel keeps trading; design and sign-off stay with the designer and building control.
How does the move away from BS 476 affect penetration seals in Winton?
From 2 September 2029, Approved Document B drops its BS 476 references in favour of BS EN 13501-2 classification, with transitional arrangements. The designer or fire engineer sets the specification, and we install the product to the manufacturer’s tested detail.
Are you fully insured?
Yes. We’re fully insured, including public liability cover.
Can the building stay open while you work?
Yes, as long as we plan it. We agree a sequence with your contact so just one area at a time is disrupted.
Can weather delay the job?
For external joints, yes. Sealant needs a dry joint and a temperature within the product’s range, so damp, frosty or very cold days can stop external work. Inside work is seldom held up.
Can the sealant be colour-matched?
That depends on the product specified. Some ranges offer many colours, others very few, so we’ll confirm the colours available for the specified product with the quote.
Will you come and look before quoting?
That depends on the size and complexity of the job. Simple work can often be priced from photos, while larger or less clear jobs get a site visit first.
Building owners, agents and FMs in Winton
FMs need a contractor who is easy to get on site. Tell us what site paperwork you need, such as RAMS, an insurance certificate or CSCS details, and we’ll confirm with the quote.
Blocks and communal areas make up much of the work for housing associations and agents. Work can be phased so residents and staff keep access throughout, with each stage agreed with your site contact.
What the job involves on each surface
Masonry and concrete
Core-drilled holes are neat; broken-out ones rarely are. The gap is measured at the widest point against the detail’s limits, and any that don’t are flagged.
Cables and cable bundles
Single cables and small bundles are often within a fire-rated sealant’s tested detail. Bundle size, cable type and the space between cables all matter and we work within those limits.
Maintenance after handover
Every sealant joint needs some looking after, and their life depends on movement, exposure, cleaning and use. We suggest:
- File the specified details where the next contractor can find them
- Treat an open penetration as a priority repair
- Settle who seals which penetrations at the start of a project
- Leave fire sealant to cure fully before covering it
Don’t patch a fire-rated seal with anything outside its tested detail. Repairs need the same product and detail as the original.
Regular walk-rounds of service areas are worth the time. A cracked or disturbed seal found early is a small job compared with dozens found at once.