01277 525 020
Mon–Fri 8am–5pmSectorsFAQAccreditations
01277 525 020Get a quote

Brighton and Hove · England

Commercial sealant contractors in BN1

Sealant work for contractors, FMs and building owners across BN1, from Brighton, West Hill and Brunswick, with a fixed quote before we start.

Mastic and sealant across BN1

Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.

Ask for a quote01277 525 020

Where we work in BN1

Our services across BN1

Let us know the job and your postcode for a fixed quote: call the office on 01277 525 020 or use the quote form.

Postcodes nearby

Across Brighton and Hove

All places in Brighton and Hove
Areas we cover

Map of BN1 © OpenStreetMap contributors

Commercial sealant contractors in BN1: how it works

Mastic Doctor has been sealing joints for businesses and contractors since 2005, and the paperwork side is in order: CHAS accredited, Constructionline member, five million pounds of public liability insurance and CSCS-carded applicators. Let us know which site documents you need and they’ll be confirmed with the quote. Most enquiries involve external beads that have gone brittle and cracked and movement joints packed with grit and debris, on floor and threshold joints, washrooms and tea points and kitchen worktops and splashbacks.

At the end of each section, we remove the tape, clean down and inspect every joint with your site contact. If an area should be left alone while the sealant cures, we say how long and put signs out.

  1. We begin with whatever information you have, whether that’s photographs, a drawing or a list of locations.
  2. Next comes a diagnosis and a fixed quote.
  3. Site hours, access windows and the order of areas are agreed before we start.
  4. The failed bead is removed and the joint faces cleaned until they’re sound and dry.
  5. We fit backing to the right depth, prime where specified and lay the new bead.
  6. Finished joints are checked with you and handed over with our 12-month guarantee.

What affects the price in BN1

No two sites price the same: the joint sizes, the specified product, access and working hours each have a bearing. A fixed quote follows once we understand the job.

Why choose Mastic Doctor

  • Coloured sealants to suit the setting, where available
  • Products installed to the manufacturer’s instructions
  • Public liability insurance in place
  • CHAS accredited

Quotes

To get a fixed quote, call the office on 01277 525 020 or email drawings and photos. You can also send details through our quote form.

Local landmarks in Brighton

Locally, jobs take us to sites close to Fairlight Primary School, St Martin's Church and Park Crescent pub and the streets around them. Nearby too are Brighton Hove and Sussex Sixth Form College (0.9 miles west), Academy of Creative Training (0.9 miles south) and William Clarke Park (less than half a mile east). Brighton has its own railway station: London Road (Brighton) station. Other landmarks nearby include Brighton General Hospital (0.7 miles east) and Old Police Cells Museum (1 mile south-west). Open spaces near Brighton include Newmarket Hill and Whitehawk Hill.

Where commercial joints are in BN1

Shop fits, office refurbishments and hotel refits in towns such as Brighton, Hove and Carlton Hill all leave joints that need sealing. Visible joints call for a matched colour and a clean tooled finish.

All of Greater London is inside the ULEZ, and much of the South East is within easy reach of the capital, so jobs in BN1 are planned with access, loading and parking in mind. Along the coast in BN1, hospitality buildings tend to be busiest in the summer months, which makes the quieter months a good time for sealant work.

Brighton: On estates like Centenary Industrial Estate, under half a mile north of Brighton, the office and welfare end of each unit has its own sealant to maintain. Premises within reach of London Road (Brighton) station, less than half a mile to the north-west of Brighton, often have busy frontages where joints are seen by everyone passing.

When something else is needed

Before quoting, we check that sealant is the right answer. It isn’t the answer for:

  • Structural cracks or movement the joints weren’t designed for
  • Misted, cracked or failed glazing units (a glazier’s job)
  • A dripping trap, valve or pipe behind a fitting

Common problems we fix in BN1

Every sealant joint is a maintenance item. Its life comes down to movement, UV and weather, how it’s cleaned, how much traffic passes it and what was used in the first place. On a busy commercial site several of those pile up at once, which is why regular inspection pays.

Typical triggers for a call:

  • Untidy joints in a reception, shop floor or lobby
  • Layers of sealant, all of them failing
  • External beads that have gone brittle and cracked
  • Expansion joints with the sealant torn out

Different surfaces, different methods

Window and door perimeters

Inside, cracked sealant around frames and window boards is common. The product depends on whether the joint will be painted, in a shade that suits the frame.

Shop fronts and retail fit-outs

In retail, sealant is on show. Counters, display units, shopfront frames and floor trims all need a neat line, often in a colour to suit the brand finish. Colour options are confirmed with the quote.

Cost factors for sealant joints

There’s no standard rate for sealant work, because every site is different. What we take into account:

  • Travel to remote or island sites
  • Backing rod, priming and other preparation
  • Whether the work must be split into stages
  • Which sealant the job calls for

Cost follows what’s involved: stripping out, preparation, sealing, access and phasing. Call for a quote.

What to include in your enquiry

It doesn’t need to be a full survey. These details are enough to start:

  • The postcode of the building
  • Anything awkward about access or site hours
  • When you need the work done
  • Clear photos of the problem areas

Send details, get a quote, we seal, guaranteed: that’s how every job runs. To take the first step, call 01277 525 020 or send photos by email.

Site staff or a sealant specialist?

General builders and handymen seal joints, but it isn’t their main trade. A specialist prepares properly, controls joint depth and picks a product with the right movement class, which is what makes a joint last.

Paperwork matters too. Main contractors and clients often ask for CSCS cards, RAMS and insurance details, and we will confirm the paperwork you need with the quote.

Common questions from BN1 clients

What site paperwork can you provide?

Tell us what site paperwork you need (RAMS, insurance certificate, CSCS details) and we’ll confirm with the quote. We are CHAS accredited and a Constructionline member, with five million pounds of public liability insurance.

How soon can the area be used again?

The product and site conditions decide that. Some take light use quickly, others need longer to cure, so we’ll confirm the curing time on the day.

How long does a typical visit take?

It depends on the scope, but the work typically takes a few hours for one area, or a planned series of visits across a bigger building. For bigger or phased jobs, we’ll set out a timescale with the quote.

Is the old sealant taken out first?

Removal comes first, every time. After that come cleaning, primer where needed, backing and the new sealant.

How do you choose the sealant?

A specification, where there is one, decides it. If there isn’t one, it comes down to the joint: how much it moves, what it bonds to and whether it’s wet, trafficked or fire-rated.

Is BN1 in your area?

Yes. We cover BN1, and the simplest way to start is to phone 01277 525 020 or email us.

What about asbestos in old mastic?

Some older mastics did contain asbestos. So we check the register first and stop work on anything suspect until it’s tested.

Accreditations

Trusted. Accredited. Insured.