Fire Stopping in Icklesham
Fire-rated and intumescent sealing of service penetrations and linear gaps across Icklesham, carried out by CSCS-carded applicators. CHAS accredited and fully insured.
- Old intumescent sealant that has split away
- Open linear gaps along the top of fire-resisting walls
- Improvised or mixed-product fire seals
Fire stopping in Icklesham
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
How we handle fire stopping in Icklesham
Every service that crosses a compartment wall or floor leaves an opening, and that opening needs sealing to hold back fire and smoke. Our job is fitting fire-rated and intumescent sealant at those service penetrations, and along linear gaps, where it is the specified product. Each seal follows the manufacturer’s tested detail. If you have open linear gaps along the top of fire-resisting walls and fire sealant pulled out of the opening, we can help. Sealant applicators who only do sealant are a different proposition from a general trade with a gun in the van: on jobs in Icklesham, preparation and product choice get the time they need.
For a smaller site near Icklesham, we plan to do all the penetrations in one go, with the specification and photos sent in advance. We install to the specification and the manufacturer’s guidance, leaving design and sign-off with the designer and building control.
What our 12-month guarantee covers is the way we did the job: the preparation, the sealing and the tooling. Damage, later alterations by others and movement beyond what the joint was designed for sit outside it.
- Where
- Icklesham (TN36)
- Wider area
- East Sussex
- Guarantee
- A 12-month guarantee
- Quotes
- Quoted before any work starts
- Phone
- 01277 525 020
- Last updated
- 3 November 2026
When to bring in a specialist
Redoing a failed joint normally costs more than getting it right at the outset, because the whole bead must be removed and the faces cleaned back again. For that reason, many FMs and contractors use a sealant specialist from the outset.
There’s also the paperwork. Many sites expect CSCS cards, RAMS and proof of insurance, and we’ll confirm the paperwork you need with the quote.
Common problems we fix in Icklesham
Physical damage is another reason seals stop doing their job. Seals get knocked during maintenance, cut back to add a cable or pulled out when services are swapped and the opening isn’t always resealed.
If one of these sounds familiar, it’s time for a closer look:
- Unsealed openings around new pipes and cables
- Open linear gaps along the top of fire-resisting walls
- Penetration schedules that need working through
- Hidden openings found during inspections
In a school such as Icklesham Church of England Primary School, fire-rated sealant goes in around service penetrations where it is specified.
Comparing quotes
- How the existing material will be dealt with
- The terms of the workmanship guarantee
- How the joint faces will be prepared and primed
- How joint depth will be controlled
Diagnose, treat, sign off
The first thing on site is a walk round with your contact, agreeing which joints are in scope, where to start and what must stay open. Then we strip out anything that has failed, prepare every joint and seal it. For a building around Icklesham, tell us how to find it and who will meet us. Add it to your enquiry and we’ll build it into the plan.
- We ask for the product and detail your designer has specified.
- We sort the openings by the detail each one needs.
- Old or wrong materials are cut out.
- Where the detail needs backing, it goes in at the stated depth.
- We gun the sealant in to the specified depth around each service and tool it.
- Completed areas are checked with you, with the records agreed when we quoted.
Before we start on site
- Agree which areas must stay open
- Have the specification and drawings to hand
- Move anything stored against the joints
Ask for a quote
For a fixed quote, ring 01277 525 020 or email drawings and photos with the site address and an outline of the work. You can also send details through our quote form.
Advice
Owners, agents and contractors
If you look after buildings for someone else, clear figures and clear communication matter. We quote a fixed sum, confirm the scope and walk the finished work with you or your representative.
Agents, factors and owners’ representatives all follow the same route: send the details, accept a fixed quote, and we carry out and guarantee the work. We can agree access arrangements and keyholder contacts beforehand.
Your questions answered
How does the removal of BS 476 from Approved Document B affect fire-rated sealing in Icklesham?
References to BS 476 classes are being removed from Approved Document B from 2 September 2029, after which BS EN 13501-2 classification is the route, subject to transitional arrangements. Our part doesn’t change: the specified product, to its tested detail.
Is Icklesham too far out for you?
Not at all. Icklesham is within our area. London and every South East county are within our area. Good photos up front let us bring everything on the first visit.
Does weather matter for sealant work?
For external joints, yes. The joint has to be dry and within the product’s temperature range, so frost, rain or cold mornings can delay outside work. Inside work is seldom held up.
What hours do you work?
Give us your site hours and any access windows in your enquiry, and we will schedule the work to suit. Our office runs Monday to Friday, 8am until 5pm.
How soon can the area be used again?
Curing time varies by product, and we confirm it on the day, and sign any area that should be left alone.
Do your applicators hold CSCS cards?
Yes. We use CSCS-carded applicators, which many sites require.
Will you just go over the old sealant?
No. Overlaying old sealant is a frequent cause of early failure, so it all comes out first.
Compartment walls and floors in Icklesham
At about 52 miles from central London, Icklesham is within reach of the capital. Office refits around the commuter belt bring new cabling through fire-resisting walls, and the gaps need sealing with the specified product. In England, Approved Document B covers fire stopping of openings and penetrations. References to the older BS 476 classes are being removed from it from 2 September 2029, after which the European classification, BS EN 13501-2, is the route, subject to transitional arrangements. What we install is set by the specification, and it goes in to the tested detail.
In a building such as The Parish Church of St Nicholas, any service penetration through a fire-resisting wall should be sealed to the specified detail. On a hospital site such as Conquest Hospital, 4.8 miles south-west of Icklesham, fire-rated sealant goes in where the specification calls for it, with the work planned around the estates team’s permits.
Icklesham is about 6 miles north-east of Hastings, in East Sussex. Commercial clients in Icklesham use us for work on service penetrations. Icklesham is one of 308 places we cover in East Sussex. Sites around Brighton have their own page, roughly 35 miles from Icklesham.
Postcode districts covered here: TN36. Buildings on Tithe Barn Field, Manor Close and High Fords are within our area. Nearby places we also cover include Broad Street (1 mile west), Cock Marling (2 miles north), Udimore (2 miles north), Three Oaks (2 miles south-west) and Broadland Row (3 miles north-west) for service penetrations. Further afield, our area takes in Hastings (6 miles south-west), Bexhill-on-Sea (10 miles south-west), St Leonards (7 miles south-west), Hastings Old Town (5 miles south-west), Belmont (5 miles south-west) and Hollington (6 miles south-west).
Near you in Icklesham
For rail, the closest station is Winchelsea station, about 2 miles north-east of the centre. A little further out are Camber Castle (3.2 miles east) and Winchelsea Court Hall Museum (1.9 miles east). Green spaces nearby include Rye Harbour Nature Reserve.
Cost factors for service penetrations
What shapes the price:
- Access and working height
- Removal of failed or old sealant
- Distance, for remote addresses
- The site’s rules and procedures
The specified product makes a difference, and so does the preparation, from cutting out to priming and backing rod. Access, phasing and site rules also count.
What to include in your enquiry
For an accurate fixed quote, we need to understand the site. Useful things to include:
- What the building is and how it’s used
- The product your specification calls for
- Whether an asbestos survey exists
- How the joints are reached, and at what height
A handful of photographs and a postcode is the fastest way to a quote. Upload them with the quote form, or speak to us on 01277 525 020 or use the quote form if you’d rather talk the job through.
Leave it or put it right?
Leave a penetration open and smoke and fire can cross into the next compartment far earlier than intended. While the openings can be reached, sealing them is normally straightforward. Wait until ceilings close or areas are occupied and the same work becomes harder to reach. Converted and older buildings near places like Icklesham tend to move, and aged sealant cracks. The right product, sized to the joint, copes much better.
Whether it’s a single area or a whole estate, the same things set the price: what’s in scope, how we reach it, what’s specified and when it needs doing. Call for a quote and we’ll put a fixed figure on it.
Why appoint us
- Joints cleaned back to sound surfaces
- Fully insured
- Specification-led, product-correct work
- Constructionline member for supplier checks
Read what affects the cost or our accreditations.