Fire-rated sealing and fire stopping in Rye Foreign, East Sussex
Fire stopping for Rye Foreign, from a contractor working since 2005. Fully insured and CHAS accredited.
- Unsealed openings around new pipes and cables
- Unsealed joints where partitions meet the slab
- Seals disturbed by maintenance and left open
Fire stopping across Rye Foreign
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Site staff or a sealant specialist?
A short, simple internal joint is often within reach of a maintenance team. The usual problems come from preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.
For most general trades, sealant is a sideline. A specialist brings correct preparation, depth control with backing rod and a product suited to that particular joint.
About our fire stopping in Rye Foreign
On a fit-out or refurbishment, we follow the services contractors floor by floor. To price a package, give us a call on 01277 525 020 or send details through our quote form with the schedule or marked-up drawings and the specified product data. Tell us what records you need and we’ll confirm with the quote. The enquiries we see most involve head-of-wall gaps with no fire seal and fire-rated sealant that has cracked or shrunk back, across joints between fire-resisting walls and floors, pipe penetrations and linear gaps at wall heads. Looking for mastic applicators who cover Rye Foreign? We have been sealing commercial buildings since 2005, with CSCS-carded applicators.
Around smaller places like Rye Foreign, penetration seals come up in schools, halls, pubs with rooms, care homes and farm buildings used as offices. Any service penetration through those walls should be closed with the specified product, set out as its test evidence shows.
A 12-month guarantee applies to all our work. If an installation problem shows up, ring 01277 525 020 or send photos by email and we will arrange a return visit.
- Location
- Rye Foreign (TN31)
- Wider area
- East Sussex
- Cover
- 12 months on every job
- Price
- Quoted before any work starts
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
For managing agents and facilities managers
Hotels, schools, healthcare sites, offices and retail units book us directly too. We plan around the way the building is used, so guests, pupils, patients or staff are disturbed as little as possible.
Main contractors use us as their sealant subcontractor. We work to your programme, your specification and your site rules, with CSCS-carded applicators on site.
Questions about Rye Foreign
Is Rye Foreign too far out for you?
Not at all: smaller places are covered as well as towns. London and every South East county are within our area. Good photographs up front let us bring everything on the first visit.
How does the removal of BS 476 from Approved Document B affect fire-rated sealing in Rye Foreign?
References to BS 476 classes are being removed from Approved Document B from 2 September 2029, after which BS EN 13501-2 classification is the route, subject to transitional arrangements. The designer or fire engineer sets the specification, and we install the product to the manufacturer’s tested detail.
How many days will you need on site?
That varies with the scale of the job, though a typical visit usually takes longer where risers, ceiling voids or occupied floors have to be worked through in sequence. For bigger or phased jobs, we will set out a timescale with the quote.
Can one quote cover more than one building?
Yes. We take on portfolio and planned maintenance work, with each site phased to suit its occupants.
How much does the work cost?
There isn’t a price list, because every site is different. Send photos or drawings and we will price it at a fixed figure.
Are you insured?
Yes. We are fully insured, and the certificate can go with your quote.
Do you guarantee your work?
Yes. Our workmanship is backed for 12 months.
Fire-rated sealing for Rye Foreign buildings
Rye Foreign has a good number of hotels close by, all within 2 miles. Hotels are divided into compartments, and refurbishments that add pipes and cables through bedroom and corridor walls leave gaps to close. For England, the fire stopping of penetrations is dealt with in Approved Document B. The national BS 476 classes are due to drop out of it from 2 September 2029, leaving the European BS EN 13501-2 route, subject to transitional arrangements. Our part stays the same: the specified product, installed to its tested detail.
In a building such as The Parish Church of St Peter and St Paul, any service penetration through a fire-resisting wall should be sealed to the specified detail. Schools such as Peasmarsh Church of England Primary School often have new data and services installed during holidays, and penetrations through fire-resisting walls should be checked afterwards.
Rye Foreign is about 9 miles north-east of Hastings, in East Sussex. Looking for fire stopping in Rye Foreign? We can help. 308 places across East Sussex fall within our area, including Rye Foreign. We also cover Brighton, around 38 miles from Rye Foreign.
If you need fire stopping in TN31, the process matches everywhere else we work: details, then a fixed price, then sealing and a 12-month guarantee. Nearby places we also cover include Iden (1 mile north-east), Playden (1 mile east), Houghton Green (2 miles east), Rye (2 miles south-east) and East Guldeford (2 miles east) for service penetrations. Nearby towns on our patch include Hastings (9 miles south-west), Bexhill-on-Sea (13 miles south-west), St Leonards (10 miles south-west), Hastings Old Town (9 miles south-west), Belmont (9 miles south-west) and Hollington (9 miles south-west).
What’s near Rye Foreign
In Rye Foreign, that means premises near Rye College and The Horse And Cart Inn and the streets around them. The nearest railway station is Rye station, about 1.7 miles south-east of the centre. Nearby you will also find Rye Castle Museum (East Street) (1.9 miles south-east) and Ypres Tower (2 miles south-east). Not far away are Flatropers Wood.
Do you need fire stopping in Rye Foreign?
When a seal departs from its tested detail, the evidence no longer covers it. An oversized gap, too shallow a bead, missing backing or two makers’ products combined are the usual culprits.
Common reasons buildings call us in:
- Improvised or mixed-product fire seals
- Open linear gaps along the top of fire-resisting walls
- Service penetrations left open after M&E works
- Fire seals cut back for extra cables and never reinstated
On estates like Jempson Trading Estate (1.9 miles south-east of Rye Foreign), the wall between office and warehouse is often fire-resisting, and cables through it need the specified seal.
Comparing quotes
- What the guarantee covers, and for how long
- What site paperwork they can supply
- Proof of insurance
- Is the sealant right for the movement and the substrate?
What the job involves on each surface
Masonry and concrete
Openings through concrete vary from tidy cores to rough break-outs. The gap is measured at the widest point so we know it sits within the tested range.
Small ducts
Small ductwork can sometimes be sealed with sealant where the tested detail includes it. Bigger ducts and fire-resisting ductwork are normally handled with other products and we flag that rather than guess.
Places near Rye Foreign
Also in Rye Foreign
Honest limits
Not every problem is a sealant problem, and we’re upfront when that’s the case. It won’t fix:
- Plastic pipes whose detail calls for a collar or wrap
- Fire doors, dampers or other fire safety equipment
- Deciding what a wall or floor needs, which belongs to the designer
If in doubt, phone 01277 525 020 or email drawings and photos and we will say what we think.
Surfaces we seal
- Linear gaps at wall heads
- Small duct penetrations where the tested detail allows
- Cable penetrations
- Pipe penetrations
- Joints between fire-resisting walls and floors
- Service gaps in risers
From enquiry to sign-off
Before we leave any area, the masking comes off, the area is cleaned and every joint is checked. Where the sealant needs time to cure before use, we tell you and sign the area. For a building around Rye Foreign, tell us how to find it and who will meet us. Send that with the details and we’ll confirm the plan with the quote.
- The specification and schedule come first, so we know which details apply.
- We plan the sequence of floors, risers and voids with you.
- We compare every service penetration with its tested detail before sealing.
- Foam, ordinary sealant and debris come out so the seal starts clean.
- Backing and fire-rated sealant are installed to the detail and tooled.
- Anything outside the detail is reported to you rather than sealed.
Before we start on site
- Point out parking and an unloading spot
- Flag any permit to work we’ll need
- Send your site hours and access windows
Ask for a quote
If there’s a specification, drawings or a tender package, send it with your enquiry, and we’ll price the work to it. Smaller jobs need nothing more than photos and a few notes.