Stonegate fire stopping
Work needed on a service penetration in Stonegate? We look at it, seal it with the right product and hand it over with a 12-month guarantee.
- Builders’ foam or ordinary silicone in compartment walls
- Seals that don’t match their tested detail
- Open linear gaps along the top of fire-resisting walls
Fire stopping across Stonegate
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Stonegate: questions and answers
Can you work on a hospital site such as Ticehurst House Hospital?
Yes. Healthcare sites are among the places we work. Before anything starts, the estates team agrees permits, inductions and infection-control measures with us.
What does the BS 476 change mean for fire-rated sealant in Stonegate?
References to BS 476 classes are being removed from Approved Document B from 2 September 2029, after which BS EN 13501-2 classification is the route, subject to transitional arrangements. Our part doesn’t change: the specified product, to its tested detail.
Do you take on small jobs?
We quote for single jobs as well as large packages and programmes. Send details for a fixed quote.
Are you CHAS accredited?
Yes. We are CHAS accredited and a Constructionline member, which helps with supplier vetting.
Can the building stay open while you work?
Yes, with some planning. We agree a sequence with your contact so just one area at a time is disrupted.
How do I request a quote?
There are four steps: send details, get a quote, we seal, guaranteed. Step one needs little more than photos and a postcode.
Do your applicators hold CSCS cards?
Yes. We use CSCS-carded applicators, as many construction sites ask for.
About our fire stopping in Stonegate
Our applicators are CSCS-carded, and we are CHAS accredited and a Constructionline member. We hold no third-party fire-stopping installer certificate. What we offer is careful installation of the specified sealant to its tested detail, with a 12-month guarantee on our workmanship. If you have non-fire-rated filler around services and open linear gaps along the top of fire-resisting walls, we can help, whatever the surface. A single leaking joint is often how a building in Stonegate first comes to us: we check the joints around it and give you an honest view of what needs doing now and what can wait.
For a smaller site near Stonegate, we plan to do all the penetrations in one go, with the specification and photos sent in advance. Design and sign-off belong to the designer or building control; we install what’s specified.
Our 12-month guarantee is about workmanship, not wear and tear. How long a sealant joint lasts depends on movement, exposure, cleaning and use, so we’re clear about what is covered before work starts.
- Place
- Stonegate (TN5)
- Region
- East Sussex
- Guarantee
- A 12-month guarantee
- Price
- Quoted before any work starts
- Call
- 01277 525 020
- Last updated
- 3 November 2026
Quoting for work in Stonegate
There’s no standard rate for sealant work, since sites vary so much. What we take into account:
- Any access equipment needed
- Working within restricted access windows
- Which sealant the job calls for
- How much existing material needs removing
A quote for service penetrations depends on how many there are, their condition and the access, plus any specification you are working to. Ask us for a fixed quote.
What we need to price the job
There’s no need for a formal survey. A few details are enough to get going:
- Photos of the joints, close up and from further back
- The product your specification calls for
- Asbestos survey details if the building is older
- Anything awkward about access or site hours
Pricing a project or setting a maintenance budget? Send the scope and any drawings, and we will return a fixed quote you can plan around. If you have questions first, ring 01277 525 020 or email a schedule or drawings.
Also near Stonegate
Other services in Stonegate
Why act early in Stonegate
Open penetrations multiply: each new service adds to the list. Keeping on top of it after each round of works keeps the job small. One visit to deal with every failing joint makes more sense than several trips to a place like Stonegate, rather than one at a time. Send photos of each area and we will quote for the lot.
The work involved drives the cost: removing old material, preparing the joints, the product, the access and how the work is phased. Call for a quote and we’ll explain how it’s made up.
Why clients in Stonegate choose us
- Constructionline member
- Fixed quotes based on photographs, drawings or a visit
- Public liability insurance in place
- One phone line for London, the South East and Scotland
See what affects the cost and our accreditations and insurance.
Should maintenance staff do it?
Putting right a botched joint often costs more than sealing it well at the start, because the whole bead must be removed and the faces cleaned back again. For that reason, many FMs and contractors use a sealant specialist from the outset.
Site maintenance staff can often handle a short internal joint. The usual problems come from preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.
From enquiry to sign-off
We bring the products specified for the job, along with primers and backing rod. Any old material is cut back to clean, sound faces, the manufacturer’s primer is applied where it’s called for, and each bead is tooled to a neat concave finish. Smaller jobs around Stonegate can be grouped with others nearby. You will have a fixed quote before work starts.
- We start with your penetration schedule, drawings or specification.
- Access, permits and the order of areas are agreed with the site team.
- We compare every service penetration with its tested detail before sealing.
- Unsuitable material is removed and the opening cleaned so the seal starts clean.
- Backing and fire-rated sealant are installed to the detail and tooled.
- We tell you about openings that need a different product.
Preparing the site
- Agree which areas must stay open
- Share the asbestos register for older buildings
- Share your working hours and any access restrictions
Ask for a quote
Specifications, drawings and tender packages are welcome with any enquiry, and we’ll price the work to it. For smaller jobs, photos and a description will do.
Read more
Work for main contractors and building owners
FMs need a contractor who is easy to get on site. Tell us what site paperwork you need, such as RAMS, an insurance certificate or CSCS details, and we will confirm with the quote.
As a CHAS accredited contractor and Constructionline member, we are straightforward to vet for your supplier list. Our insurance certificate can be sent along with the quote.
Surface by surface
Drylining partitions
Plasterboard partitions are tested as a specific construction. The sealant detail has to be tested in that wall type, with the stated board layers.
Plastic pipes
Plastic waste pipes through slabs come up often. The detail decides whether sealant alone is enough, and we won’t substitute it for a specified collar.
Fire-rated sealing for Stonegate buildings
Fire stopping of openings and penetrations in England falls under Approved Document B. From 2 September 2029, BS 476 references are being taken out of Approved Document B, leaving BS EN 13501-2 classification as the route, subject to the Government’s transitional arrangements. Our part stays the same: the specified product, installed to its tested detail. Stonegate lies roughly 38 miles out from central London. Tenant changes on commuter-belt business parks mean regular fit-outs, and new services through compartment walls, and the gaps need sealing with the specified product.
For a building at a site such as Parsonage Farm Business Centre, 1.3 miles to the north-east of Stonegate, a check of penetration seals after each fit-out is good practice. Older community buildings such as Church of St Peter that have been rewired or given new heating can have service gaps through walls worth checking against the specification. Large healthcare estates like Ticehurst House Hospital (1.5 miles north-east of Stonegate) change their services often, so penetration seals are worth checking after M&E work.
Stonegate is about 9 miles south-east of Royal Tunbridge Wells, in East Sussex. Stonegate sits inside our coverage and the rest of East Sussex, with the same fixed quotes and 12-month guarantee as everywhere else. Stonegate is one of 308 places we cover in East Sussex. For work in that direction, see our Brighton page, about 26 miles away.
If you need fire stopping in TN5, the process matches everywhere else we work: send details, get a quote, we seal, guaranteed. Streets here include Station Road, Forge Field and Lymden Lane. Close to Stonegate, our area also takes in Wallcrouch (1 mile north), Shover's Green (1 mile north-west), Birchett's Green (2 miles north), Witherenden Hill (2 miles south-west) and Holton Hill (2 miles south). Nearby towns on our patch include Hastings (14 miles south-east), Bexhill-on-Sea (13 miles south), Hailsham (13 miles south-west), Crowborough (9 miles west), St Leonards (14 miles south-east) and Uckfield (13 miles west).
Landmarks near Stonegate
The nearest railway station is Stonegate station, about 1 mile south-west. Other landmarks nearby include Old Scotney Castle (4.4 miles north) and Ticehurst House Hospital (1.5 miles north-east). Open spaces near Stonegate include Bewl Water.