Fire-rated sealing and fire stopping in Rye Harbour, East Sussex
Our CSCS-carded applicators take on fire-rated and intumescent sealing of service penetrations and linear gaps in Rye Harbour. Send photos or drawings for a fixed quote.
- Penetration schedules that need working through
- Service penetrations left open after M&E works
- Non-fire-rated filler around services
Fire stopping for businesses in Rye Harbour
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
What the job involves on each surface
Risers and ceiling voids
Voids hide a lot of unsealed openings. We follow your schedule area by area.
Linear joints
Head-of-wall joints often have to absorb slab deflection. We use the product and backing the detail names for that movement.
How we handle fire stopping in Rye Harbour
Our applicators are CSCS-carded, and we are CHAS accredited and a Constructionline member. We don’t hold a third-party fire-stopping installer certificate and we’d rather say that up front. We install the specified fire-rated sealant to its tested detail, and our workmanship carries a 12-month guarantee. The enquiries we see most involve old intumescent sealant that has split away and hidden openings found during inspections, across linear gaps at wall heads, joints between fire-resisting walls and floors and service gaps in risers. Searching for sealant specialists in Rye Harbour? We’ve been sealing commercial buildings since 2005.
A job near Rye Harbour is normally planned around one visit, with the specification and photos sent in advance. Design and sign-off belong to the designer or building control; we install what’s specified.
Every job ends the same way: guaranteed. You get a 12-month guarantee on our workmanship, and the quote explains what it covers.
- Where
- Rye Harbour (TN31)
- Region
- East Sussex
- Guarantee
- 12 months on every job
- Price
- Quoted before any work starts
- Phone
- 01277 525 020
- Last updated
- 3 November 2026
Questions about Rye Harbour
Is Churchfields Industrial Estate, near Rye Harbour, within your area?
Yes. Our area takes in Rye Harbour and its surroundings, with estates and business parks such as Churchfields Industrial Estate included. To start, just phone 01277 525 020 or send photos by email with the unit, the joints involved and your access times.
Is Rye Harbour off your patch?
No. Small places get the same service as large ones. London and every South East county are within our area. Good photographs up front let us bring everything on the first visit.
Is the BS 476 change in 2029 relevant to fire stopping?
For buildings in England, Approved Document B removes BS 476 references from 2 September 2029. Classification to BS EN 13501-2 becomes the expected evidence. Scotland follows its own Technical Handbook, including clause 2.1.14 on service penetrations.
Can one quote cover more than one building?
Yes. Several buildings can share a single quote, and you deal with one contact throughout across South East England, Greater London and Scotland.
How long does a typical visit take?
It depends on the scope, though a typical visit usually takes anything from one day to a planned run of visits, depending on the number of seals and the access. For bigger or phased jobs, we’ll set out a timescale with the quote.
Can the sealant be colour-matched?
It depends on the product. Some ranges are wide, others limited, so we will confirm the colours available for the specified product with the quote.
Can weather delay the job?
Outside, yes. The joint has to be dry and within the product’s temperature range, so frost, rain or cold mornings can delay outside work. Inside work is seldom held up.
Penetration seals near Rye Harbour
In England, Approved Document B covers fire stopping of openings and penetrations. References to the older BS 476 classes are being removed from it from 2 September 2029, after which the European classification, BS EN 13501-2, is the route, subject to transitional arrangements. We install whatever has been specified, to the product’s tested detail. At about 54 miles from central London, Rye Harbour is within reach of the capital. Business park offices in the commuter belt are refitted as tenants change, and each fit-out adds services through compartment walls.
Halls and meeting rooms at places like The Church of the Holy Spirit sometimes gain new services, and any compartment wall crossed needs the specified seal. In a school such as Rye College, fire-rated sealant goes in around service penetrations where it is specified. Industrial units on estates such as Churchfields Industrial Estate (under half a mile south-west of Rye Harbour) often separate offices from warehouse space with fire-resisting walls, and new services through them need the specified seal.
Rye Harbour is about 10 miles north-east of Hastings, in East Sussex. Any commercial site in Rye Harbour is covered, whether it’s a single job or part of a planned programme. 308 places across East Sussex fall within our area, including Rye Harbour. For work in that direction, see our Brighton page (39 miles or so).
Commercial sites across TN31 are covered for service penetrations. For a building on Tram Road, Camber Road and Oyster Creek or nearby, we can quote for service penetrations. If your building is just outside Rye Harbour, we cover Rye (1 mile north-west), Camber (1 mile east), East Guldeford (1 mile north), Playden (2 miles north-west) and Houghton Green (2 miles north). Nearby towns on our patch include Hastings (10 miles south-west), Bexhill-on-Sea (14 miles south-west), St Leonards (11 miles south-west), Hastings Old Town (9 miles south-west), Belmont (9 miles south-west) and Hollington (10 miles south-west).
What’s near Rye Harbour
Recent enquiries here include premises near Inkerman Arms and Rye Harbour LNR. The closest station to Rye Harbour is Rye station, about 1.5 miles north-west. Nearby you’ll also find Rye Castle Museum (East Street) (1.3 miles north-west) and Camber Castle (1.2 miles west). For a walk, there’s Rye Harbour Nature Reserve.
Cost factors for service penetrations
These are the things that shape the price:
- The total length or number of joints
- Site requirements such as inductions and permits
- Travel to remote or island sites
- Backing rod, priming and other preparation
Quantities, awkward access and phased working all shape the price. So do site requirements such as inductions and permits, along with the time of year for external work.
Before you send an enquiry
There’s no need for a formal survey. These details are enough to start:
- Your programme or deadline
- Approximate linear metres or a joint schedule
- Specification clauses that apply
- How the joints are reached, and at what height
To get a fixed quote, call 01277 525 020 or send photos by email, telling us the site location and the nature of the job. You can also send details through our quote form.
Building owners, agents and FMs in Rye Harbour
Building owners and managing agents use us on everything from one building to a spread of sites. One quote can cover more than one site, so there’s one set of paperwork to deal with.
Agents, factors and owners’ representatives all follow the same route: send the details, accept a fixed quote, and we carry out and guarantee the work. We can agree access arrangements and keyholder contacts beforehand.
Places near Rye Harbour
More services for Rye Harbour
On site: what to expect
Tell us your site hours and access windows and we’ll plan around them. On the day, the work area is kept contained and tidy, and your contact hears from us before we move to the next area. For work around Rye Harbour, we aim to finish in one visit, so we ask for photographs and rough sizes first. Then the right materials arrive with us.
- First we go through the drawings, schedule or specification for the seals.
- Every penetration is compared with its detail: wall or floor type, service, gap size and depth.
- Unsuitable fillers and loose debris are taken out of each opening.
- We fit the backing the detail asks for, to the stated depth.
- We apply the specified sealant to the depth and around the services as the detail shows.
- Openings that need a collar, wrap, batt or other product are flagged to you rather than filled with sealant.
Preparing the site
- Arrange parking or a loading space
- Send any specification or drawings in advance
- Tell us your opening times and when work is allowed
Get a fixed quote
Tell us about the building, the joints and when you need the work done, and we’ll put a fixed quote together. The easiest way is to phone 01277 525 020 or send details through our quote form.
Related advice
Maintenance after handover
For the best life from the joints:
- Leave fire sealant to cure fully before covering it
- Get seals inspected before ceilings and boxing close
- Ask the designer to confirm details early on refits
- Put resealing into every M&E and fit-out package
After the work, brief anyone else working in the area that the openings are now sealed. If a seal has to be opened for a new service, it should be reinstated to the same detail, by someone who knows the system.
Ask every contractor who works in risers or voids to report openings they create. Small habits like this stop openings building up.
What happens if it’s left?
The longer openings stay, the more there tend to be: every new cable or pipe adds another. Keeping on top of it after each round of works keeps the job small. Halls, stores and units around places like Rye Harbour may not be checked every day, so a failed joint can leak for a while before anyone sees it. Resealing early avoids that.
Access often affects the price as much as the sealing: joints within easy reach take less time than ones that need access equipment. Mention the access as part of your enquiry.
Why clients in Rye Harbour choose us
- Sealing commercial buildings since 2005
- Constructionline member for supplier checks
- Fully insured
- Failed material removed, not covered up
Take a look at what affects the cost and how we’re accredited.