East Sussex · England
Commercial sealant contractors in TN5
Our applicators cover all of the TN5 postcode district, which takes in Wadhurst, Ticehurst and Flimwell. Failed sealant is always cut out completely, with a 12-month guarantee.
Mastic and sealant across TN5
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Places in TN5
- Wadhurst
- Ticehurst
- Flimwell
- Stonegate
- Cousley Wood
- Best Beech Hill
- Birchett's Green
- Newbury's
- Pell Green
- Shover's Green
- Stonecrouch
- Three Leg Cross
- Tidebrook
- Wallcrouch
Our services across TN5
- Mastic sealing for building owners and managing agents
- Expansion and movement joint sealing
- Industrial and floor joint sealing
- Fire-rated sealing and fire stopping
- Commercial washroom and wet-area sealing
- Construction and new-build mastic
- Coloured and colour-matched sealant
- Commercial sealant contractors
- Facade and window perimeter sealing
- See all services
Let us know the job and your postcode and we’ll come back with a price: give us a call on 01277 525 020 or email a schedule or drawings.
Districts next door
Elsewhere in East Sussex
Every town in East Sussex
Every area we cover
Commercial sealant contractors across TN5: what to expect
Mastic Doctor has been sealing joints for businesses and contractors since 2005, and the documents buyers ask for are ready: CHAS accredited, Constructionline member, five million pounds of public liability insurance and CSCS-carded applicators. If your site needs RAMS, an insurance certificate or CSCS details, say so and we’ll confirm with the quote. We work on movement joints in walls and floors, washrooms and tea points and external facade joints, and the usual reasons a site gets in touch are earlier reseals applied straight onto the failed bead and smeared sealant across finishes from a rushed job.
Before we leave any area, we remove the tape, clean down and inspect every joint with your site contact. Where the sealant needs time to cure before use, we tell you and sign the area.
- First, details come to us: photographs, drawings or a schedule of the areas.
- Next comes a diagnosis and a fixed quote.
- Before anything is cut out, we agree access, timings and sequence.
- We strip the failed bead and prepare both faces of the joint.
- We fit backing to the right depth, prime where specified and lay the new bead.
- Finished joints are checked with you and handed over with our 12-month guarantee.
What affects the price in TN5
We don’t publish prices, because the scope varies so much from one building to the next. For a fixed figure, call for a quote.
What you get with us
- Standard and matched colours in many product ranges
- Work carried out by CSCS-carded applicators
- A fixed quote before work starts
- Commercial sealant work since 2005
Get a fixed quote
We quote a fixed sum against the scope you give us, so you know the figure before anyone is on site. To start the process, phone 01277 525 020 or email a schedule or drawings.
Local landmarks in Wadhurst
Around Wadhurst, our work takes us to commercial buildings near White Hart pub, Uplands Community College and The Parish Church of St Peter and St Paul. Wadhurst’s nearest station is Wadhurst station, roughly 1 mile north-west of the centre. Well-known places in the area include Ticehurst House Hospital (3.1 miles east) and Old Scotney Castle (3.9 miles north-east). The countryside around Wadhurst includes Bewl Water.
Commercial sealant contractors across TN5: the area picture
Across TN5, from Wadhurst, Ticehurst and Flimwell to the smaller places between, commercial buildings run from high-street shops and offices to hotels, schools and business parks. We cover the whole area, so occupiers with several sites can use one contractor and one point of contact, with colours matched site to site where the brand needs it.
All of Greater London is inside the ULEZ, and much of the South East is within easy reach of the capital, so jobs in TN5 are planned with access, loading and parking in mind.
Wadhurst: Industrial estates such as Durgates Industrial Estate, less than half a mile north-west of Wadhurst, have offices, trade counters and welfare areas whose sealant ages like any other building’s. Shops and cafés around stations like Wadhurst station (1 mile north-west of Wadhurst) trade from early, so work is timed around them.
After the work
Sealant joints are maintenance items, and their life depends on movement, exposure, cleaning and use. Our advice:
- Keep barriers up until the new sealant has cured
- Act on the first lifting edges rather than waiting
- Check joints after other trades have worked nearby
- Log reseals in the O&M or maintenance records
Keep an eye out for other trades after we’ve gone. Shop refits, new services and replaced fittings often break the seal around them, and it’s easy to forget to reseal afterwards. Where work has disturbed a joint, just give us a call on 01277 525 020 or send details through our quote form for a quote.
A failed external joint lets water in every time it rains. Behind a panel or frame, that water can sit unseen for a long time. Resealing early keeps the problem in the sealant and out of the building.
What we are called out for in TN5
Washrooms and kitchens wear sealant out in their own way. Damp, harsh cleaning products and poor ventilation let mould take hold inside the bead, and once established it rarely cleans out. The fix is a new bead of anti-mould sanitary silicone.
What tends to prompt an enquiry:
- Messy, uneven beads from earlier work that let the building down
- Shrunken sealant along kitchen worktops and splashbacks
- Mouldy silicone around WCs, urinals and vanity tops
- Layers of sealant, all of them failing
How the job changes by surface
Fire-rated seals where specified
Intumescent and other fire-rated sealants go in at service penetrations and linear gaps to the maker’s tested details, where they are specified. Fire-stopping design and sign-off sit with the designer, fire engineer or building control; we install what’s specified.
Movement joints in walls and floors
Brickwork, blockwork and floor slabs all have movement joints that need a flexible seal. Failed seals let grit and water in, and the edges start to suffer. The joints are resealed using a sealant matched to the movement and any traffic.
When it isn’t the sealant
We seal joints; we don’t mend everything behind them. Sealant alone won’t deal with:
- A failed roof covering or waterproofing membrane
- Water from a services leak rather than a joint
- Suspect materials that need testing and specialist removal
Work for main contractors and building owners
CHAS accredited and a Constructionline member, we make supplier vetting simple. Our insurance certificate can be sent along with the quote.
We take on planned maintenance as well as one-off repairs: resealing failed joints building by building, on a schedule that suits your budget. TN5 can form part of a wider programme across East Sussex.
Questions we are asked in TN5
Are your applicators CSCS-carded?
Yes. We use CSCS-carded applicators.
Is it fine to apply new sealant on top of old?
No. Failed sealant is removed and the faces cleaned back to sound, dry material first, because fresh silicone will not bond with aged silicone.
Do you work directly for building managers?
Yes. A large share of our work comes through facilities managers, managing agents and landlords as well as contractors. Tell us how you issue work and we’ll fit in.
How soon can the area be used again?
The product and site conditions decide that. Some products skin over quickly but need longer to cure fully, and we confirm it before leaving site.
When is resealing likely to be due?
It depends on movement, UV and weather, cleaning, traffic and the product. Sealant joints are maintenance items, so inspect them regularly.
Do you take on multi-site sealant work?
Yes. Give us the sites and the scope at each, and we’ll put together a fixed quote and a sensible order of work.
Does the weather affect the work?
Outside, yes. Sealant needs a dry joint and a temperature within the product’s range, so damp, frosty or very cold days can stop external work. Internal work is rarely affected.