Fire Stopping in Ashburnham
Need fire stopping in Ashburnham? Send us the details for a fixed quote, backed by a 12-month guarantee on the work.
- Unsealed penetrations discovered above suspended ceilings
- Penetration schedules that need working through
- Unsealed openings around new pipes and cables
Need fire stopping in Ashburnham?
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Fire-rated sealing for Ashburnham buildings
In England, Approved Document B covers fire stopping of openings and penetrations. From 2 September 2029, BS 476 references are being taken out of Approved Document B, leaving BS EN 13501-2 classification as the route, subject to the Government’s transitional arrangements. Our part stays the same: the specified product, installed to its tested detail. Central London is about 46 miles from Ashburnham. Business park offices in the commuter belt are refitted as tenants change, and each fit-out adds services through compartment walls; the gaps need the specified seal.
Older community buildings such as Parish Church of St Peter that have been rewired or given new heating can have service gaps through walls worth checking against the specification. On a hospital site such as Bexhill Hospital, 5.5 miles to the south-east of Ashburnham, fire-rated sealant goes in where the specification calls for it, with the work planned around the estates team’s permits.
Ashburnham is about 5 miles north-west of Bexhill-on-Sea, in East Sussex. Looking for fire stopping in Ashburnham? We can help, as we do across East Sussex. Our East Sussex coverage takes in 308 places, large and small. Brighton is covered too, some 24 miles away.
We take on service penetrations across the TN33 postcode area, for business premises of every kind. If your site is on Church Road and The Forge or close by, send details and we will quote for service penetrations. Nearby places we also cover include Brownbread Street (1 mile west), The Pound (1 mile south), Bodle Street Green (2 miles west), Wood's Corner (3 miles north-west) and Dallington (3 miles north-west). Further afield, our area takes in Eastbourne (10 miles south-west), Hastings (8 miles east), Bexhill-on-Sea (5 miles south-east), Hailsham (7 miles south-west), Crowborough (14 miles north-west) and St Leonards (8 miles south-east).
Around Ashburnham
Recent enquiries here include premises near Ashburnham Park and The Ash Tree Inn, among other places. Ashburnham’s nearest station is Battle station, about 4.4 miles east of the centre. A little further out are Old Castle (3.1 miles north-west) and Battle Museum of Local History (3.9 miles east). The countryside around Ashburnham includes Senlac Hill.
Fire stopping in Ashburnham, done properly
We should be clear about what we do and don’t do. The designer, fire engineer or building control decides which fire stopping is required. What we bring is careful installation of the specified sealant, to the maker’s guidance in Ashburnham and nearby. The enquiries we see most involve unsealed openings around new pipes and cables and expanding foam used as fire stopping, on joints between fire-resisting walls and floors, pipe penetrations and small duct penetrations where the tested detail allows. A single leaking joint is often how a building in Ashburnham first comes to us: we check the joints around it and give you an honest view of what needs doing now and what can wait.
Barn and farm-building conversions near places like Ashburnham often combine new partitions with old walls. Where a pipe or cable passes through a fire-resisting wall, the seal must match the tested detail: product, substrate, gap and depth.
We stand behind the joints we seal with a 12-month guarantee. It covers how we prepared and applied the sealant, and we come back if anything isn’t right.
- Where
- Ashburnham (TN33)
- Region
- East Sussex
- Guarantee
- 12 months on every job
- Quote
- Quoted before any work starts
- Telephone
- 01277 525 020
- Updated
- 3 November 2026
Nearby places to Ashburnham
What else we do in Ashburnham
Building owners, agents and FMs in Ashburnham
CHAS accredited and a Constructionline member, we make supplier vetting simple. Our insurance certificate can be sent along with the quote.
FMs need a contractor who is easy to get on site. Let us know the documents you need (RAMS, insurance certificate, CSCS details) and we’ll confirm them with the quote.
Quoting for work in Ashburnham
A fixed quote reflects the actual work. It takes account of:
- The total length or number of joints
- Backing rod, priming and other preparation
- The product specified
- The site’s rules and procedures
Small jobs and large programmes are priced from the same things: scope, access, product and programme. Call for a quote, and you’ll have a fixed figure to work with.
What we need to price the job
A few photos plus some basic facts will normally do. It helps to include:
- Any dates the work must fit around
- Drawings or a marked-up plan, if available
- How the joints are reached, and at what height
- The site address and postcode
Photos, drawings or a schedule of the joints are often enough for a fixed quote. If the job needs a look first, we’ll arrange a site visit.
Questions we’re asked in Ashburnham
Is Ashburnham off your patch?
No. Small places get the same service as large ones. We work across Greater London and the South East. Where we can, we group nearby jobs to make the most of each trip.
How does the move away from BS 476 affect penetration seals in Ashburnham?
From 2 September 2029, Approved Document B drops its BS 476 references in favour of BS EN 13501-2 classification, with transitional arrangements. Our part doesn’t change: the specified product, to its tested detail.
Do you guarantee your work?
Yes, for 12 months. If our installation fails in that time, we return and fix it.
Will you come and look before quoting?
It depends on the job. Straightforward work can often be priced from photos and measurements, while larger or less clear jobs get a site visit first.
Who decides which product is used?
A specification, where there is one, decides it. If there isn’t one, it comes down to the joint: how much it moves, what it bonds to and whether it’s wet, trafficked or fire-rated.
Can you handle several sites?
Yes. A group of buildings can go on one quote, and you deal with one contact throughout across South East England, Greater London and Scotland.
Are you fully insured?
Yes. We are fully insured, including public liability cover.
Looking after the joints
Cleaning and maintenance staff play a part too. Share these points with them:
- Keep product data and details in the fire safety file
- Put resealing into every M&E and fit-out package
- Get seals inspected before ceilings and boxing close
- Leave fire sealant to cure fully before covering it
During planned inspections, look at seals in risers, cupboards and voids. Watch for cracked sealant, new services with no seal and openings that have grown, and report them promptly.
Make reporting new openings part of every permit to work in service areas. It costs little and catches breaches early.
Should maintenance staff do it?
General builders and handymen seal joints, but it isn’t their main trade. A specialist prepares properly, controls joint depth and picks a product with the right movement class.
What you see is the finished bead, but most of the work is hidden. Backing rod, primer where specified and a joint designed to move with the building are where general trades tend to cut corners.
How a job runs
We bring the products specified for the job, along with primers and backing rod. Any old material is cut back to clean, sound faces, the manufacturer’s primer is applied where it’s called for, and each bead is tooled to a neat concave finish. For a building around Ashburnham, tell us how to find it and who will meet us. Send that with the details and we will confirm the plan with the quote.
- We read the specification, drawings or penetration schedule you send and ask about anything unclear.
- On site, each opening is checked against the tested detail it is meant to follow.
- Anything that doesn’t belong in the opening, such as expanding foam or general-purpose filler, is removed.
- Mineral wool or other backing goes in wherever the detail asks.
- Fire-rated or intumescent sealant is gunned in to the specified depth, then tooled.
- If an opening needs something other than sealant, we tell you instead of improvising.
Getting the site ready
- Share the asbestos register for older buildings
- Point out any areas we must not close
- Tell staff and tenants when we will be in
Get a fixed quote
Every job follows the same four steps: send details, get a quote, we seal, guaranteed. To take the first step, call the office on 01277 525 020 or email the details over.
Advice
What happens if it’s left?
An improvised seal can look finished while offering no tested performance. Correcting it means cutting it out and starting again with the specified product, so it makes sense to get it right first time. For buildings around smaller places like Ashburnham, water damage can go unnoticed for longer, especially where a building isn’t used daily, so a failed joint can leak for a while before anyone sees it. Renewing joints in good time avoids the problem.
What a job costs comes down to the quantity of joints, how much old material needs removing and how the joints are reached. Call for a fixed quote once you have the details.
What you get with us
- Sealing commercial buildings since 2005
- Health and safety: CHAS accredited
- One contact handling all your sites
- Fully insured, including public liability cover