Fire Stopping in Silver Hill
We carry out fire-rated and intumescent sealing of service penetrations and linear gaps in Silver Hill. Send photographs or drawings for a fixed quote.
- Open linear gaps along the top of fire-resisting walls
- Improvised or mixed-product fire seals
- Old intumescent sealant that has split away
Fire stopping across Silver Hill
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
General trades versus a specialist
For a quick touch-up, site staff may be fine, but larger jobs are different: a specialist brings efficiency, a consistent finish and a 12-month guarantee.
There’s also the paperwork. Main contractors and clients often ask for CSCS cards, RAMS and insurance details, and our CSCS-carded applicators are used to working under those rules.
Fire stopping in Silver Hill
It helps to set out our role at the start. Deciding the specification sits with the designer, the fire engineer and building control; sign-off sits with them too. We fit the specified fire-rated sealant following that specification and the maker’s installation guidance on sites in Silver Hill. We work on cable penetrations, joints between fire-resisting walls and floors and service gaps in risers, and the usual reasons a site gets in touch are unsealed penetrations discovered above suspended ceilings and builders’ foam or ordinary silicone in compartment walls. A specialist sealant contractor works differently from a general builder: in Silver Hill, that means joint design, primers and backing rod as standard.
A job near Silver Hill is typically planned around one visit, so send the specification and photos first. Design and sign-off belong to the designer or building control; we install what’s specified.
Every job we finish is backed by a 12-month workmanship guarantee, wherever the site is. If a joint we sealed fails because of how it was installed, we come back and put it right.
- Location
- Silver Hill (TN19)
- Region
- East Sussex
- Guarantee
- A 12-month guarantee
- Price
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Updated
- 3 November 2026
Nearby places to Silver Hill
What else we do in Silver Hill
Looking after the joints
For the best life from the joints:
- Look above ceilings when tiles are lifted for other jobs
- Don’t let anyone top up a fire seal with the wrong product
- Put resealing into every M&E and fit-out package
- Have penetrations checked while they can still be seen
After the work, brief anyone else working in the area that the openings are now sealed. Any seal cut back for a new service needs reinstating to its tested detail using the same product.
Specify fire stopping early on refits, not as an afterthought. The designer can then choose details that suit the services planned, and installation follows the programme.
Penetration seals near Silver Hill
In England, Approved Document B covers fire stopping of openings and penetrations. References to the older BS 476 classes are being removed from it from 2 September 2029, after which the European classification, BS EN 13501-2, is the route, subject to transitional arrangements. Our part stays the same: the specified product, installed to its tested detail. Central London is about 42 miles from Silver Hill. Offices around the capital are refitted often, and the cabling that follows can breach fire-resisting walls.
In a building such as Holy Trinity, any service penetration through a fire-resisting wall should be sealed to the specified detail. Wherever services are added at a hospital such as Hawkhurst Community Hospital (2.9 miles north of Silver Hill) the compartment line has to be made good with the specified product. Holiday works at schools like Hurst Green Church of England Primary School and Nursery often leave service openings to seal before pupils return.
Silver Hill is about 10 miles north of Hastings, in East Sussex. If you’re looking for fire stopping in Silver Hill, we can help, as we do across East Sussex. 308 places across East Sussex fall within our area, including Silver Hill. Brighton is covered too, some 29 miles away.
Commercial sites across TN19 are covered for service penetrations. If your building is just outside Silver Hill, we cover Hurst Green (1 mile north-west), Burgh Hill (1 mile north-west), Cooper's Corner (1 mile north), Etchingham (2 miles west) and Flimwell (3 miles north-west). Further afield, our area takes in Hastings (10 miles south), Bexhill-on-Sea (11 miles south), Hailsham (14 miles south-west), Crowborough (14 miles west), St Leonards (11 miles south) and Hastings Old Town (12 miles south-east).
Near you in Silver Hill
Around Silver Hill, our work takes us to commercial buildings near The White Horse Public House and Robertsbridge Community College, among other places. Silver Hill’s nearest station is Etchingham station, roughly 1.4 miles west of the centre. A little further out are Ticehurst House Hospital (4.4 miles north-west).
When it isn’t the sealant
Part of a good diagnosis is knowing where sealant stops. You will hear from us if the cause turns out to be one of these:
- Deciding what a wall or floor needs, which belongs to the designer
- Gaps in walls that were never built as compartment walls
- Plastic pipes whose detail calls for a collar or wrap
If in doubt, call the office on 01277 525 020 or send details through our quote form and we will say what we think before you book.
Surfaces we seal
- Joints between fire-resisting walls and floors
- Small duct penetrations where the tested detail allows
- Cable penetrations
- Linear gaps at wall heads
- Service gaps in risers
- Pipe penetrations
How a job runs
We bring the products specified for the job, along with primers and backing rod. Any old material is cut back to clean, sound faces, the manufacturer’s primer is applied where it’s called for, and each bead is tooled to a neat concave finish. Smaller jobs around Silver Hill can be grouped with others nearby. You will have a fixed quote before work starts.
- We read the specification, drawings or penetration schedule you send and ask about anything unclear.
- Every penetration is compared with its detail: wall or floor type, service, gap size and depth.
- Anything that doesn’t belong in the opening, such as expanding foam or general-purpose filler, is removed.
- We fit the backing the detail asks for, to the stated depth.
- Fire-rated or intumescent sealant is gunned in to the specified depth, then tooled.
- Openings that need a collar, wrap, batt or other product are flagged to you rather than filled with sealant.
Getting the site ready
- Move anything stored against the joints
- Tell us your opening times and when work is allowed
- Tell us what induction or permit system the site runs
Getting a fixed quote
Tell us about the building, the joints and when you need the work done, and we’ll put a fixed quote together. The easiest way is to ring 01277 525 020 or use the quote form.
Advice
Questions about Silver Hill
Is Bodiam Business Park, near Silver Hill, within your area?
Yes. Estates, retail parks and business parks around Silver Hill, Bodiam Business Park among them, are all within reach. To start, just ring 01277 525 020 or email the details over with the unit, the joints involved and your access times.
Is Silver Hill too small for you to travel to?
Not at all: smaller places are covered as well as towns. Our area covers London and the South East counties. We plan jobs in smaller places so return trips are kept to a minimum.
What do BS EN 1366-3 and BS EN 13501-2 mean?
In short, BS EN 1366-3 and 1366-4 are the fire tests and BS EN 13501-2 is how results are classified. EI 60 means integrity and insulation for 60 minutes in the tested arrangement and the installation has to match the test.
Do you certify or sign off fire stopping?
No. Sign-off belongs to the designer or building control, not the installer. We’ll confirm the products and details used, and you can tell us what other records you need at quote stage.
How long does a typical visit take?
We plan the time on site around your programme and access. We will give you an estimate of time on site when we quote.
Which sealant will you use?
If the job is specified, we follow the specification. Otherwise, we recommend a product to suit the joint’s movement, the substrate and the conditions, following the manufacturer’s guidance.
Do you hold third-party fire-stopping installer certification?
No, and we won’t imply otherwise. Some clients require third-party installer schemes even though the law doesn’t, so it’s worth checking what your contract says. Where it isn’t required, we install the specified sealant to the maker’s details.
For managing agents and facilities managers
Planned maintenance programmes are welcome: resealing failed joints building by building, on a schedule that suits your budget. Silver Hill can form part of a wider programme.
CHAS accredited and a Constructionline member, we make supplier vetting simple. Our insurance certificate can be sent along with the quote.
What affects the price in Silver Hill
Quotes vary with the job. It mainly depends on:
- Joint width, depth and condition
- Removal of failed or old sealant
- Working within restricted access windows
- Distance, for remote addresses
Pricing service penetrations depends on quantities, condition and access. Ask us for a fixed quote.
Sending details for a quote
We can often quote from photographs and a few details. It helps to include:
- Any dates the work must fit around
- Anything awkward about access or site hours
- Specification clauses that apply
- The postcode of the building
Specifications, drawings and tender packages are welcome with any enquiry, and we’ll price the work to it. Smaller jobs need nothing more than photos and a few notes.