Fire Stopping in Rodmell
Our CSCS-carded applicators take on fire-rated and intumescent sealing of service penetrations and linear gaps in Rodmell and the surrounding area. Send photographs or drawings for a fixed quote.
- Openings found when ceilings come down for a refit
- Builders’ foam or ordinary silicone in compartment walls
- Improvised or mixed-product fire seals
Fire stopping in Rodmell
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Fire stopping around Rodmell: what changes locally
Fire stopping of openings and penetrations in England falls under Approved Document B. References to the older BS 476 classes are being removed from it from 2 September 2029, after which the European classification, BS EN 13501-2, is the route, subject to transitional arrangements. What we install is set by the specification, and it goes in to the tested detail. Central London is about 46 miles from Rodmell. Offices around the capital are refitted often, and the cabling that follows can breach fire-resisting walls, and the gaps need sealing with the specified product.
Colleges such as Sussex Downs College (2.4 miles north of Rodmell) add IT and services as courses change, and each new penetration through a fire-resisting wall needs sealing with the specified product. Where a unit on an estate such as Cliffe Industrial Estate (2.4 miles north of Rodmell), has fire-resisting walls between offices and warehouse, any new service through them should be sealed to the tested detail.
Rodmell is about 3 miles south of Lewes, in East Sussex. If you’re looking for fire stopping in Rodmell, we can help. Across East Sussex, 308 places are covered, Rodmell among them. There’s a separate page for Brighton, about 6 miles away.
Business premises anywhere in BN7 are within our area for service penetrations. If your site is on Mill Lane, Badgers Dene and The Paddocks or close by, send details and we’ll quote for service penetrations. If your building is just outside Rodmell, we cover Northease (1 mile north-west), Iford (1 mile north-west), Piddinghoe (2 miles south-east), Kingston near Lewes (2 miles north-west) and Telscombe (2 miles south-west). A short drive away, we cover Eastbourne (12 miles east), Seaford (6 miles south-east), Lewes (3 miles north), Hailsham (11 miles east), Uckfield (10 miles north-east) and Newhaven (3 miles south-east).
Local landmarks in Rodmell
Recent enquiries here include premises near Lewes and Laughton Levels and the streets around them. For rail, the closest station is Southease station, about 0.9 miles east of the centre. Nearby you will also find Planet Earth Museum (2.8 miles south-east) and Lewes Castle (2.7 miles north). Green spaces nearby include Southerham Farm and Itford Hill.
How we handle fire stopping in Rodmell
For main contractors, our fire stopping package slots in after the M&E trades have finished in an area. To price a package, call the office on 01277 525 020 or send photos by email with the schedule or marked-up drawings alongside the manufacturer’s details. Tell us what records you need and we will confirm with the quote. Most enquiries involve unsealed openings around new pipes and cables and fire seals cut back for extra cables and never reinstated, across cable penetrations, pipe penetrations and linear gaps at wall heads. Sealant applicators who only do sealant are a different proposition from a general trade with a gun in the van: on jobs in Rodmell, preparation and product choice get the time they need.
Barn and farm-building conversions near places like Rodmell often combine new partitions with old walls. Where a pipe or cable passes through a fire-resisting wall, the seal must match the tested detail: product, substrate, gap and depth.
We stand behind the joints we seal: 12 months, guaranteed. It covers how we prepared and applied the sealant, and we come back if anything isn’t right.
- Place
- Rodmell (BN7)
- Wider area
- East Sussex
- Guarantee
- 12 months on every job
- Price
- A fixed quote before we start
- Call
- 01277 525 020
- Updated
- 3 November 2026
Doing it in-house
What you see is the finished bead, but most of the work is hidden. Backing rod, primer where specified and a joint designed to move with the building are where general trades tend to cut corners.
Putting right a botched joint often costs more than sealing it well at the start, since all of it has to come out and the faces be cleaned back again. That’s why many clients bring in a specialist from the beginning.
Commercial clients in Rodmell
For main contractors, we work as the sealant subcontractor, on new build and refurbishment alike. We work to your programme, your specification and your site rules, and our applicators hold CSCS cards.
Building owners and managing agents use us on sealant work across single buildings or whole portfolios. Several sites can go on one quote, so there’s one set of paperwork to deal with.
Diagnose, treat, sign off
We bring the products specified for the job, along with primers and backing rod. Joint faces are cleaned back to sound, dry surfaces, primer goes on where the manufacturer specifies it, and each bead is tooled to a neat concave finish. Smaller jobs around Rodmell can be grouped with others nearby, which keeps travel down. You’ll have a fixed quote before work starts.
- We read the specification, drawings or penetration schedule you send.
- Every penetration is compared with its detail: wall or floor type, service, gap size and depth.
- Unsuitable fillers and loose debris are taken out of each opening.
- We fit the backing the detail asks for, to the stated depth.
- We apply the specified sealant to the depth and around the services as the detail shows.
- Openings that need a collar, wrap, batt or other product are flagged to you rather than filled with sealant.
Before we start on site
- For older buildings, check the asbestos register before work
- Have the specification and drawings to hand
- Tell us what induction or permit system the site runs
Ask for a quote
Send details, get a quote, we seal, guaranteed: that’s how every job runs. The first step is to speak to us on 01277 525 020 or email the details over with what you know.
Related advice
Nearby places to Rodmell
What else we do in Rodmell
Why deal with it now?
Open service penetrations matter on ordinary days, not just in a fire: they also carry noise, draughts and smells between rooms. Sealing them to the specified detail deals with the fire risk first and the building feels the difference. Around Rodmell, it’s better to renew all the failing joints at once, rather than one at a time. Send photos of each area and we’ll quote for the lot.
We don’t publish prices, because the scope varies so much from one building to the next. Call for a quote.
What you get with us
- Constructionline member for supplier checks
- Public liability insurance in place
- Commercial sealant work since 2005
- Products installed to the manufacturer’s instructions
Read how commercial sealant jobs are priced and our accreditations and insurance.
Do you need fire stopping in Rodmell?
Linear gaps fail where a fire-resisting wall meets a slab, soffit or another wall. Movement in the frame or slab can open the joint, and a product not tested for that movement may crack. The tested detail for a linear joint states the width and movement it covers.
It’s worth sending us details if you spot any of the following:
- Openings left by services added after handover
- Unsealed joints where partitions meet the slab
- Seals that don’t match their tested detail
- Expanding foam used as fire stopping
Older community buildings such as St Peter's Church that have been rewired or given new heating can have service gaps through walls worth checking against the specification.
Comparing quotes
- How the existing material will be dealt with
- How the joint faces will be prepared and primed
- Their plan for phasing and protecting the area
- How joint depth will be controlled
What sets the cost
To price the job, we consider:
- Phasing around occupants
- Site requirements such as inductions and permits
- Quantities, in metres or numbers
- Removal of failed or old sealant
Quantities, awkward access and phased working all shape the price. Site requirements like inductions and permits play a part as well.
What we need to price the job
There’s no need for a formal survey. These details are enough to start:
- Any specification or named product
- How the joints are reached, and at what height
- Where the site is, with the postcode
- Whether the building will be occupied during the work
Tell us about the building, the joints and when you need the work done, and a fixed quote will follow. To get it moving, call the office on 01277 525 020 or send details through our quote form.
Rodmell: questions and answers
Do you take on work at healthcare sites like Lewes Victoria Hospital?
Yes. We work in healthcare settings as well as offices and schools. We follow the site’s permits, sign-in and infection-control procedures in every area.
Is a smaller place like Rodmell outside your area?
Not at all: smaller places are covered as well as towns. London and every South East county are within our area. Where we can, we group nearby jobs to make the most of each trip.
Do you seal openings left by new services?
Yes, provided a specification covers them. New services after M&E works often breach existing seals.
What changes on 2 September 2029?
In England, references to the older BS 476 national classes are being removed from Approved Document B from 2 September 2029, with transitional arrangements set by the Government. The European route, BS EN 13501-2, then applies. Your designer will choose products with the right evidence.
What’s the quickest route to a quote?
You can use the quote form on this site; alternatively, give us a call on 01277 525 020 or send photos by email. Include photographs or drawings if you have them.
Do you offer coloured sealant?
In many cases, yes. Sealants are made in a wide range of standard colours, and matching to RAL references or nearby finishes is commonly requested. We confirm what’s available for the specified product when we quote.
Can you send site paperwork?
Tell us what site paperwork you need (RAMS, insurance certificate, CSCS details) and we will confirm with the quote.