South East England and London

Facade Sealing in Essex

We cover 644 towns and villages across Essex for facade sealing, with failed joints always cut out and a 12-month guarantee on our workmanship.

Need facade sealing in Essex?

Photos, a specification or a quick description of the joints is enough to start a fixed quote.

Get a quick quote 01277 525 020

Facade sealing across Essex

Facade joint and window perimeter sealing on commercial buildings. Choose your town from the list to see local details, or send details for a fixed quote.

Main towns

Facade sealing in Essex: how it works

Facade sealants sit in the sun, rain and frost every day. Life depends on movement, weathering, product choice and the quality of the original work. When it fails, the whole bead is cut away and the joint rebuilt. We work on window and door perimeters, shopfront frames and perimeter joints where frames meet the structure, and the usual reasons a site gets in touch are facade joints cracked through the middle and unsightly perimeter sealant on a visible elevation.

On arrival, we sign in, go through any site induction and check how permits are handled. Floors, finishes and fittings next to the joints are covered before any cutting starts, with the work itself normally taking anything from a single day to several weeks, depending on joint lengths, access and the weather.

Photos, drawings or a visit tell us about the joints and the access.
We confirm the joint type, movement and the specified product.
Failed beads are removed in full and the joint faces cleaned.
Primer goes on where the product data asks for it.
Backing rod is fitted and the new sealant gunned in and tooled.
The finished joints are checked with you.

How we quote

Small jobs and large programmes are priced from the same things: what’s in scope, how we reach it, what’s specified and when it needs doing. Call for a quote and we will put a fixed figure on it.

What you get with us

CHAS accredited
Specification-led, product-correct work
Work carried out by CSCS-carded applicators
Failed material removed, not covered up

Getting a fixed quote

Need a figure for a tender or a budget? We’ll quote against your scope and drawings you can plan around. If you have questions first, call 01277 525 020 or email drawings and photos.

What’s near Colchester

Recent enquiries here include premises near Church of St Peter, Bull Meadow and The Bay And Say Public House and the streets around them. Other local landmarks include Colchester Sixth Form College (less than half a mile north-west) and St John's Green Primary School (less than half a mile south). There’s a railway station in Colchester itself: Colchester Town station. A little further out are Lion Walk (less than half a mile south-east) and Essex County Hospital (under half a mile south-west). Open spaces near Colchester include Westhouse Wood.

Sites and facades across Essex

We take on mastic packages across Essex, on large sites in places such as Colchester, Chelmsford and Basildon and small schemes elsewhere. Send drawings, the programme and your paperwork requirements, and we will confirm everything with the quote.

The South East has large numbers of business parks and industrial estates, especially around the motorway corridors, and we cover Essex along with the rest of the region. Coastal places in Essex often have hotels, guest houses and holiday accommodation with busy seasons, which makes the quieter months a good time for sealant work.

Colchester: For contractors at a college like The Sixth Form College Colchester, under half a mile north-west of Colchester, perimeters and internal sealant are timed for the holidays. Hospital estates such as Oaks Hospital (1.1 miles north of Colchester) tend to grow and change in phases, often next to occupied wards, so facade and perimeter sealing has to fit the estates team’s plan.

Why it fails

Overlaying old sealant is a common shortcut that fails quickly. Fresh silicone won’t stick to cured silicone.

Clients usually get in touch after noticing something like this:

Previous reseals run over old sealant
Cold air coming in at window perimeters
Failed sealant on precast panel joints
Failed seals around shopfront and entrance frames

Why act early?

Topping up a failed joint normally buys very little time. A full cut-out and reseal costs more on the day but lasts much longer, so you aren’t paying for the same joint twice.

Comparing quotes

Will RAMS and insurance details be available?
Their public liability cover
Is depth set with backing rod, or bond-breaker tape in shallow joints?
The named product and why it was chosen

Building owners, agents and FMs in Essex

CHAS accredited and a Constructionline member, we make supplier vetting simple. Our insurance certificate can be sent along with the quote.

Hotels, schools, healthcare sites, offices and retail units book us directly too. The work is planned around how the building runs, so the building keeps working while we do.

Keeping the joints sound

After handover, these steps help:

Avoid harsh cleaners on facade sealant
Keep sills, gutters and drainage paths clear
Insist on a full cut-out when joints are renewed
Keep the sealant details on the building file

Look at perimeter and panel joints as part of routine building checks. Watch for splits, gaps at the edges, hardening and discolouration; note where they appear.

Coordinate facade sealing with other external works. Sharing the access keeps the cost down and limits disruption.

Cost factors for facade joints

Each job is priced on its own details. The main factors are:

The total length or number of joints
The site’s rules and procedures
Removal of failed or old sealant
Specialist products, such as fire-rated or hygienic sealants

Larger quantities, tricky access or phasing all shape the price. So do site requirements such as inductions and permits, along with the time of year for external work.

Before you send an enquiry

Whether it’s one area or a whole building, these details speed things up:

Access details, including height
Asbestos survey details if the building is older
Your programme or deadline
A wide shot and a close-up of the area

Send details, get a quote, we seal, guaranteed: that’s how every job runs. The first step is to phone 01277 525 020 or send photos by email with what you know.

FAQs: Essex

How do I request a quote?

It works in four steps: send details, get a quote, we seal, guaranteed. Step one needs little more than photographs and a postcode.

Can you quote from photos?

It depends on the job. Straightforward work can often be priced from photos and measurements, and bigger or more complex jobs normally get a visit.

Do you take on small jobs?

Whatever the size, the process is the same: details, then a fixed price, then sealing, then a 12-month guarantee.

Do your applicators hold CSCS cards?

Yes. Should the site need card details in advance, let us know and we’ll send them with the quote.

Can you fit around our working hours?

The office is staffed Monday to Friday, from 8am until 5pm. Let us know your site hours and access windows, and the work will be planned around them.

What will the job cost?

It depends on the job: quantities, access, the product and any phasing. Call for a fixed quote and we will price it properly.

Will you check whether the sealant is causing the leak?

Yes. We look at the perimeter sealant and tell you whether it has failed. Where the cause seems to be elsewhere, we’d rather tell you than reseal pointlessly.