The Mastic Doctor team standing beside their branded vans outside an office building
Essex · England

Chickney facade sealing

Commercial sealant work in Chickney for contractors, FMs and building owners: facade joint and window perimeter sealing on commercial buildings, with a fixed quote first.

  • Previous reseals run over old sealant
  • Unsightly perimeter sealant on a visible elevation
  • Water coming in around window frames
1
Send details
Send the specification, photos or a marked-up plan.
2
Get a quote
Scope agreed and priced before anything starts.
3
We seal
Failed joints cut out, faces prepared, new sealant laid.
4
Guaranteed
12-month guarantee on our workmanship.
London, the South East & Scotland
CHAS & Constructionline
£5m public liability

Facade sealing near Chickney

Photos, a specification or a quick description of the joints is enough to start a fixed quote.

Facade sealing in Chickney

Every facade quote starts with how the joints will be reached. Let us know what access exists or is planned, and any site rules we need to work around, so the price covers the real job. The enquiries we see most involve leaks at window and door perimeters and hard, chalky sealant that no longer flexes, on stone and brick facade joints, perimeter joints where frames meet the structure and shopfront frames. Sealant contractors, mastic applicators, sealant specialists: whatever the job title on the order, the work in Chickney is the same: the right product in a properly prepared joint.

Around smaller places like Chickney, building work usually means conversions of farm buildings, a few new houses or an extension to a hall or school. Each still needs a proper mastic package: window perimeters, facade joints and internal sealant to the specification.

The 12-month guarantee covers our workmanship: the preparation, the sealing and the tooling. Damage, later alterations by others and movement beyond what the joint was designed for sit outside it.

The Mastic Doctor team beside their liveried vans in front of an office building
Place
Chickney (CM6)
Region
Essex
Cover
12 months on every job
Quotes
A fixed quote before we start
Phone
01277 525 020
Updated
3 November 2026

Mastic packages on Chickney sites

At about 33 miles from central London, Chickney is within reach of the capital. Construction around the commuter belt mixes station-side flats with refurbished offices and units, and main contractors there need mastic that keeps to the programme. Rainfall across the South East, Chickney included, is lower than in many parts of the UK. Still, external mastic needs dry faces within the maker’s temperature limits, which isn’t every day, so we time external mastic for dry faces and agree it with the site team.

Units on estates such as Williams Field Business Centre (0.7 miles south-west of Chickney) tend to be reclad and refitted as tenants change, and each job leaves cladding and perimeter joints to seal. With historic properties like Horham Hall (to the north of Chickney) in the area, refurbishment work often meets old masonry that needs compatible sealants.

Chickney is about 4 miles north-west of Great Dunmow, in Essex. Businesses, contractors and managing agents in Chickney use us for work on facade joints. Our Essex coverage takes in 644 places. Our London page has more on work in that area, about 33 miles away.

If you need facade sealing in CM6, the process matches everywhere else we work: details, then a fixed price, then sealing and a 12-month guarantee. Just outside Chickney, we also work in Tilty (1 mile east), Duton Hill (1 mile east), Great Easton (2 miles south-east), Monk Street (2 miles north-east) and Sibley's Green (2 miles north-east). A short drive away, we cover Chelmsford (15 miles south-east), Braintree (11 miles east), Harlow (13 miles south-west), Saffron Walden (8 miles north), Halstead (14 miles east) and Great Dunmow (4 miles south-east).

Local landmarks in Chickney

Chickney’s nearest station is Stansted Airport station, about 2.5 miles south-west. A little further out are Little Easton Moat (2.4 miles south-east). The countryside around Chickney includes Portingbury Hills and Aubrey Buxton Nature Reserve.

Map of Chickney © OpenStreetMap contributors

Site staff or a sealant specialist?

General builders and handymen seal joints, but it isn’t their main trade. A specialist brings correct preparation, depth control with backing rod and a product suited to that particular joint, which is what makes a joint last.

Redoing a failed joint normally costs more than getting it right at the outset, because the whole bead must be removed and the faces cleaned back again. That’s why many clients bring in a specialist from the beginning.

How the job changes by surface

Window and door perimeters

Window and door perimeters make up most facade sealing work. A low-modulus, neutral-cure product suits most frame-to-wall joints.

Render and coated surfaces

Paintable sealants exist for joints that will be coated. The choice depends on the specification and finish.

Cost factors for facade joints

The price varies from site to site. Expect it to depend on:

  • The size and state of each joint
  • How accessible the joints are
  • Site requirements such as inductions and permits
  • The total length or number of joints

There’s no price list, because the scope varies so much from one building to the next. For a fixed figure, call for a quote.

Details that help us quote

Whether it’s one area or a whole building, the same details help:

  • Rough lengths or quantities, or drawings if you have them
  • Anything awkward about access or site hours
  • The site address and postcode
  • A wide shot and a close-up of the area

To get a fixed quote, call 01277 525 020 or use the quote form, telling us the site location and the nature of the job. You can also send details through our quote form.

Keeping the joints sound

Your facilities or cleaning team can help the joints last. Pass these on to them:

  • Confirm the survey covers external sealants in older buildings
  • Inspect facade joints on a regular cycle
  • Avoid harsh cleaners on facade sealant
  • Avoid patch repairs on failed facade joints

Anything drilled through a facade joint breaks the seal. Make sure the joint is resealed afterwards.

In pre-2000 buildings, check the asbestos register before old sealant is cut out. Older sealants can contain asbestos, and work stops until it’s tested if it’s suspected.

FAQs: Chickney

Is Chickney off your patch?

Not at all. Chickney is within our area. We cover Greater London and the counties of the South East. Where we can, we group nearby jobs to make the most of each trip.

Will you fit the mastic around our build programme in Chickney?

Yes, we work to the programme and the sequence the site sets. We’re CHAS accredited and a Constructionline member, and paperwork such as RAMS is confirmed with the quote.

Can one quote cover more than one building?

Yes. Multi-site work and planned programmes are a core part of the service, planned site by site to suit how each building is used.

How do I request a quote?

You can use the quote form on this site; alternatively, phone 01277 525 020 or send photos by email. Photos, drawings or a joint schedule help us quote quickly.

Is it okay to overlay old mastic?

No. Fresh silicone won’t grip cured silicone, so the existing bead is removed entirely and the faces are cleaned before resealing. Nothing else gives a bond that lasts.

Is the work guaranteed?

Yes, for 12 months. If our installation fails in that time, we return and fix it.

Do you offer coloured sealant?

That depends on the product. Some ranges offer many colours, others very few, so the available colours are confirmed with the quote.

On site: what to expect

The first thing on site is a walk round with your contact, agreeing which joints are in scope, where to start and what must stay open. After that, any old or failed material is removed, each joint is prepared and the new sealant goes in. Smaller jobs around Chickney can be grouped with others nearby. A fixed quote is given before anything starts.

  1. First we review photos, drawings or what we saw on a visit, and agree how each joint will be reached.
  2. The old bead is cut away completely, not overlaid.
  3. Joint faces are cleaned to firm, sound material, with primer where the sealant maker specifies it.
  4. Backing rod, or bond-breaker tape in shallow joints, limits the depth.
  5. The new sealant goes in and is tooled firmly onto both faces.
  6. The completed runs are checked with you, then the 12-month guarantee applies.

Preparing the site

  • Point out any areas we must not close
  • Tell staff and tenants when we’ll be in
  • Have the specification and drawings to hand

Getting a fixed quote

Let us know the site, the scope and your timescale, and a fixed quote will follow. The easiest way is to ring 01277 525 020 or email us.

Get a price

Related advice

Building owners, agents and FMs in Chickney

Main contractors use us as their sealant subcontractor. We work to your programme, your specification and your site rules, with CSCS-carded applicators on site.

When you manage a building on behalf of an owner, you need clear quotes and clear reporting. You get a fixed quote, an agreed scope and a walk round at the end.

Accreditations

Trusted. Accredited. Insured.