Essex · England
Commercial sealant contractors in CM5
Our applicators cover all of the CM5 postcode district, including Chipping Ongar, Marden Ash and Shelley. Failed sealant is always cut out completely, with a 12-month guarantee.
Sealant contractors for CM5
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Areas within CM5
- Chipping Ongar
- Marden Ash
- Shelley
- Fyfield
- Moreton
- High Ongar
- Clatterford End
- Bobbingworth
- Toot Hill
- Willingale
- Abbess Roding
- Beauchamp Roding
- Bovinger
- Greensted Green
- Little End
- Little Laver
- Magdalen Laver
- Pedlars End
- Shellow Bowells
- Stanford Rivers
- Hare Street
- Norwood End
- Greensted
- Norton Mandeville
- Berners Roding
- Clatterford End
- Cannon's Green
- King Street
- Radley Green
Sealant work we offer in CM5
- Coloured and colour-matched sealant
- Expansion and movement joint sealing
- Industrial and floor joint sealing
- Commercial sealant contractors
- Fire-rated sealing and fire stopping
- Mastic sealing for building owners and managing agents
- Construction and new-build mastic
- Facade and window perimeter sealing
- Commercial washroom and wet-area sealing
- All services
Tell us what needs doing and your postcode for a fixed quote: call 01277 525 020 or email drawings and photos.
Districts next door
Across Essex
Every town in Essex
Every area we cover
Our commercial sealant contractors service in CM5
On older buildings, particularly those put up before 2000, some old mastics and sealants may contain asbestos. Before anything is cut out, we ask for the asbestos register or survey. Anything suspect is left alone until it has been tested (removing asbestos-containing materials isn’t something we do). The enquiries we see most involve shrunken sealant along kitchen worktops and splashbacks and hardened, chalky sealant on south-facing or exposed elevations, across kitchen worktops and splashbacks, window and door perimeters and washrooms and tea points.
When we get to site, we sign in, go through any site induction and check how permits are handled. Floors, finishes and fittings next to the joints are covered before any cutting starts, with the work itself normally taking a few hours to several days on most single sites, depending on joint lengths and access.
- We begin with whatever information you have, whether that’s photographs, a drawing or a list of locations, or we arrange a site visit.
- We work out why the joints have failed and fix a quote for the agreed scope.
- Site hours, access windows and the order of areas are agreed before we start.
- The failed bead is removed and the joint faces cleaned until they’re sound and dry.
- We fit backing to the right depth, prime where specified and lay the new bead.
- We walk the completed areas with you and sign them off under the 12-month guarantee.
How we quote
The specified product makes a difference, and so does the preparation, from cutting out to priming and backing rod. Access, phasing and site rules also count.
Why appoint us
- Workmanship guaranteed for 12 months
- One number for every site we cover
- Public liability insurance in place
- Specification-led, product-correct work
Quotes
A handful of photos and a postcode is the fastest way to a quote. Send them through the quote form, or call 01277 525 020 or email us to discuss it first.
What’s near Chipping Ongar
We work on buildings around United Reformed Church, Chipping Ongar Primary School and The Ongar Academy, among other places. Well-known places in the area include Willingale Doe (4.5 miles north-east) and St. Margaret's Hospital (5.2 miles west). Open spaces near Chipping Ongar include Gernon Bushes.
Shops, offices and hotels in CM5
The commercial stock in CM5 mixes older town-centre buildings with newer offices and units, in places such as Chipping Ongar, Marden Ash and Shelley and beyond. Each building needs the right product for its surfaces, from stone and brick to coated aluminium and laminate.
The South East is one of the UK’s drier regions, but external sealing in CM5 still needs a dry joint and the right temperature, and damp or frosty mornings can hold it up.
Chipping Ongar: If you run a unit on an estate such as Hallsford Bridge Industrial Estate (0.9 miles south-east of Chipping Ongar), the trade counter, offices and staff facilities have joints to look after as well as the warehouse. A lasting commercial joint around Chipping Ongar begins with the old bead fully out and the faces clean and dry.
When it isn’t the sealant
Being straight saves everyone time. Fresh joints won’t solve:
- Walls or slabs moving more than any sealant can take
- Faulty windows rather than failed perimeter sealant
- Old mastic that tests positive for asbestos
What affects the price in CM5
We price every job individually. The main factors are:
- Location, for remote and island sites
- Quantities, in metres or numbers
- Backing rod, priming and other preparation
- Phasing around occupants
Cost follows what’s involved: stripping out, preparation, sealing, access and phasing. Call for a quote and we will explain how it’s made up.
What we need to price the job
A good diagnosis starts with the right details. Tell us:
- Rough lengths or quantities, or drawings if you have them
- Whether an asbestos survey exists
- The postcode of the building
- Your programme or deadline
To get a fixed quote, ring 01277 525 020 or send photos by email. You can also send details through our quote form.
How the job changes by surface
Shop fronts and retail fit-outs
In retail, sealant is on show. Counters, display units, shopfront frames and floor trims all need a neat line, frequently colour-matched to the fit-out. Colour options are confirmed with the quote.
Washrooms and toilets
Around WCs, urinals, vanity tops, IPS panels and cubicles, sealant is wet most of the day. Old sealant comes out and a sanitary silicone with anti-mould additives goes in.
Maintenance after handover
A few simple habits keep the new joints working:
- Keep barriers up until the new sealant has cured
- Keep a record of which joints were resealed and when
- Add sealant to the planned maintenance inspection list
- Report cracked or peeling sealant early
Good ventilation keeps wet-area sealant in better condition. Fans that are broken or switched off leave joints damp for longer, and mould follows damp. Your maintenance team can look at extract fans at the same time.
Each spell of wet weather pushes more water through an open joint. It can run into cavities, insulation and internal finishes long before anyone sees a stain. Resealing early keeps the problem in the sealant and out of the building.
Common problems we fix in CM5
Every sealant joint is a maintenance item. Its life comes down to movement, UV and weather, how it’s cleaned, how much traffic passes it and what was used in the first place. On a busy commercial site several of those pile up at once.
Things that normally lead to an enquiry:
- Mouldy silicone around WCs, urinals and vanity tops
- Expansion joints with the sealant torn out
- Weathered facade sealant that no longer flexes
- Frame mastic that has hardened and come away from the wall
Your questions answered
What site paperwork can you provide?
The paperwork is agreed with the quote: most clients ask for RAMS, our insurance certificate and CSCS details. Our applicators are CSCS-carded.
How soon can the area be used again?
We will confirm how long the chosen product needs to cure, and flag anything to keep off until it has cured.
Can you follow the specification on our project?
Yes. The specification and the manufacturer’s installation guidance are what we work to.
Does commercial sealant work come with a guarantee?
The work is guaranteed for 12 months. Should anything we did fail within that period, let us know.
How do we get a quote?
Price depends on joint lengths and widths, how much removal is involved, the product, access and phasing. For a fixed quote, send details through our quote form.
Is it fine to apply new sealant on top of old?
No. Failed sealant is removed and the faces cleaned back to sound, dry material first, since fresh sealant will not bond reliably to aged material.
How long does a typical visit take?
It depends on the scope, but the work normally takes a few hours to several days on most single sites, depending on joint lengths and access. Larger or phased jobs take longer, and we will give you a timescale with the quote.