Facade Sealing in Chelmsford
We carry out facade joint and window perimeter sealing on commercial buildings in Chelmsford. Send details for a fixed quote.
- Hard, chalky sealant that no longer flexes
- Discoloured or dirty facade joints
- Leaks at window and door perimeters
Facade sealing in Chelmsford
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Facade sealing for commercial buildings in Chelmsford
We seal window and door perimeters, cladding panel joints, external facade joints and perimeter joints where frames meet the structure for clients around Chelmsford. Coping and flashing joints are included where sealant is the specified fix. Most enquiries involve gaps between rainscreen or cladding panels and patch repairs that keep failing, across stone and brick facade joints, cladding panel joints and window and door perimeters. Sealant applicators who only do sealant are a different proposition from a general trade with a gun in the van: in Chelmsford, that means joint design, primers and backing rod as standard.
On larger schemes in and around Chelmsford, mastic is often programmed plot by plot or floor by floor. CSCS-carded applicators work to the site’s rules and the specification, and any snags are cleared before handover.
Our workmanship is guaranteed for 12 months. If a joint we sealed fails because of how it was installed, we come back and put it right.
Maintenance after handover
A few simple habits keep the new joints working:
- Keep pressure washers away from fresh sealant
- Check the asbestos register before old mastic is disturbed
- Note when each elevation was last resealed
- Investigate damp beside windows promptly
Hold back any cleaning crew until the joints have had their stated cure time. Keep high-pressure jets and strong chemicals away from new sealant and tell your cleaning contractor.
Coordinate facade sealing with other external works. Sharing the access keeps the cost down.
On site: what to expect
Occupied buildings need a little choreography. We sign and contain the area we’re in, keep walkways clear and move on in phases so staff and visitors can carry on around us. In a large town like Chelmsford, work on busy buildings is planned area by area, so the building keeps working. Send drawings or photos and we’ll set out a phasing plan with the quote.
- We start with photos, drawings or a visit to see the joints and agree access.
- Product choice follows the joint’s movement and substrate.
- Failed beads are removed in full.
- Primer goes on where the product data asks for it.
- Rod goes in to fix the depth, then the joint is sealed and tooled.
- The finished joints are checked with you.
What we need from you
- Send your site hours and access windows
- Have the specification and drawings to hand
- Tell staff and tenants when we’ll be in
Getting a fixed quote
Send details, get a quote, we seal, guaranteed: that’s how every job runs. The first step is to ring 01277 525 020 or use the quote form with what you know.
Advice
When to bring in a specialist
Putting right a botched joint often costs more than sealing it well at the start, because the whole bead must be removed and the faces cleaned back again. For that reason, many FMs and contractors use a sealant specialist from the outset.
The visible bead is only part of the job. Correct depth, the right primer and a sealant matched to the movement are where general trades tend to cut corners.
Honest limits
Being straight saves everyone time. New sealant won’t cure:
- Cracked or spalling substrates that need repair before sealing
- Joints too narrow for the movement they take, which need redesign
- Leaks from roofs, gutters or failed flashings rather than sealant joints
If you’re not sure, just give us a call on 01277 525 020 or send details through our quote form and we’ll give you a straight answer.
Where we work in Chelmsford
- Stone and brick facade joints
- Perimeter joints where frames meet the structure
- Cladding panel joints
- Coping and flashing joints
- Shopfront frames
- Window and door perimeters
Do you need facade sealing in Chelmsford?
Adhesive failure, where the sealant peels away from one face, typically comes from poor preparation. Contamination, moisture or skipping the primer the maker specifies leave a weak bond, and the joint opens with the first real movement.
Clients usually get in touch after noticing one or more of the following:
- Perimeter sealant that has split or peeled away
- Air leaks through failed facade joints
- Gaps between rainscreen or cladding panels
- Patch repairs that keep failing
New units and refits on sites such as Riverside Retail Park (to the west of Chelmsford) need their panel and perimeter joints sealed to the specification.
Questions to ask before you book
- How joint depth will be controlled
- Do they follow the manufacturer’s priming guidance?
- Who will actually carry out the work
- How long is the guarantee, and what does it include?
Building and refurbishing in Chelmsford
A 2-mile radius around Chelmsford takes in several hotels. Hotel extensions and refits usually have to fit around bookings, so mastic dates are tight. The South East is one of the drier parts of the UK. Even so, frost and condensation on steel and glass are common on winter mornings, so the external programme keeps a little slack.
On a healthcare site such as Priory Hospital Chelmsford, less than half a mile north of Chelmsford, new blocks and refurbishments go on while the hospital keeps running, so mastic work is sequenced carefully. University estates such as Anglia Ruskin University (to the north-west of Chelmsford) tend to have a rolling programme of new buildings and refurbishments, each with window perimeters and facade joints to seal.
Chelmsford is about 30 miles north-east of London, in Essex. Businesses, contractors and managing agents in Chelmsford use us for work on facade joints, as part of our coverage of Essex. We work across 644 places in Essex. We also cover London, some 30 miles away.
Work on facade joints is covered throughout CM1, CM2, CM3 and CM4, for business premises of every kind. Streets here include Backnang Square, High Street and Barrack Square. You’ll find Chelmsford on or near the A12 and A130, so getting applicators and materials to site is simple. We also cover Moulsham (1 mile south-west), Patching (1 mile north-west), Widford (2 miles south-west), Broomfield (2 miles north) and Writtle (3 miles west). A short drive away, we cover Basildon (11 miles south), Braintree (11 miles north), Brentwood (11 miles south-west), Maldon (8 miles east), Canvey Island (15 miles south) and Billericay (8 miles south). Chelmsford is one of the busier places in Essex, and we take on facade joints for its commercial and public buildings.
Near you in Chelmsford
Locally, jobs take us to sites close to Our Lady Immaculate Church, The Boswells School and Chelmsford College, among other places. Other local landmarks include Chelmer Valley Riverside (0.5 miles north-west) and The Two Brewers Public House (under half a mile south-west). The closest station to Chelmsford is Chelmsford station, about 0.7 miles west. Nearby you’ll also find Priory Hospital (less than half a mile north) and Peter Edwards Museum And Library (0.8 miles south-west). Green spaces nearby include Newland Grove.
Chelmsford: questions and answers
Will you plan work around the academic year at somewhere like Anglia Ruskin University?
Yes. Tell us the term dates, vacation periods and access windows, and we’ll plan the work around them. Tell us which site documents you need, such as RAMS, our insurance certificate or CSCS details, and they’re confirmed with the quote.
Would you work within a site like Priory Hospital Chelmsford?
Yes, healthcare and care buildings are part of our work. Work is phased so departments keep running, under the site’s own rules.
Is any job too small?
We quote for single jobs as well as large packages and programmes. Send details for a fixed quote.
Do you replace windows or glass?
No. A glazing contractor handles that. What we seal are the joints around frames and panels across the facade.
Can you handle several sites?
Yes. Several buildings can share a single quote, with one point of contact across South East England, Greater London and Scotland.
Does weather matter for sealant work?
It can, when the joints are outside. Wet joints and cold, damp or frosty conditions stop the sealant bonding properly, so we watch the forecast and rearrange outside work if we have to. Indoors, the weather is rarely a problem.
Which sealant will you use?
If the job is specified, we follow the specification. Otherwise, we recommend a product to suit the joint’s movement, the substrate and the conditions, following the manufacturer’s guidance.
Building owners, agents and FMs in Chelmsford
Main contractors use us as their sealant subcontractor on new-build and refurbishment projects. Programme, specification and site rules come first, and our applicators hold CSCS cards.
Blocks and communal areas make up much of the work for housing associations and agents. We phase the work so people keep access, with each stage agreed with your site contact.