Facade Sealing in Old Heath
Facade joint and window perimeter sealing on commercial buildings in Old Heath and across Essex. CHAS accredited, Constructionline member, with a 12-month guarantee on workmanship.
- Draughts around frames and panels
- Water coming in around window frames
- Staining on stone next to old sealant
Need facade sealing in Old Heath?
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
FAQs: Old Heath
Is Old Heath too far out for you?
Not at all. Old Heath is within our area. We work across Greater London and the South East. Good photos up front let us bring everything on the first visit.
Can you work on a hospital site such as Oaks Hospital?
Yes. We work in healthcare settings as well as offices and schools. We follow the site’s permits, sign-in and infection-control procedures in every area.
How do you choose the sealant?
If the job is specified, we follow the specification. If not, we choose for the movement, the surfaces and the conditions, in line with the manufacturer’s guidance.
Do you replace failed glazing units?
No. A glazing contractor handles that. We reseal window perimeters, panel joints and frame-to-structure perimeters.
Do you use silicone for external joints?
Most facade and window perimeter joints take a low-modulus neutral-cure silicone. Some joints call for hybrid, PU or polysulphide instead.
Do you seal facades in winter?
We can work through the year, but sealant needs a dry joint and temperatures within the product’s range. Cold, damp mornings can delay a start, and we build that into the programme.
What site paperwork can you supply?
Each site asks for different documents, so list what you need, whether RAMS, insurance or CSCS details, and we’ll confirm with the quote.
Facade sealing in Old Heath, done properly
We don’t install glazing systems or replace glass. What we seal are the joints around them: the frame-to-structure perimeter, panel-to-panel joints and window and door surrounds, using sealants classified for facade or glazing use. If you have hard, chalky sealant that no longer flexes and gaps between rainscreen or cladding panels, we can put it right, whatever the surface. A specialist sealant contractor works differently from a general builder: on jobs in Old Heath, preparation and product choice get the time they need.
Building work in places the size of Old Heath is normally small-scale: a handful of new houses, barn conversions, a school or hall extension. Small schemes still need window perimeters, facade joints and internal sealant done to the specification.
We sign every job off with a 12-month guarantee. It’s a plain promise: if the work we did fails within twelve months, we return to fix it.
- Where
- Old Heath (CO2, CO1, CO4)
- Wider area
- Essex
- Guarantee
- 12 months on every job
- Quote
- A fixed quote before we start
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
Owners, agents and contractors
Hospitality, education, healthcare, office and retail clients book us directly too. The work is planned around how the building runs, so guests, pupils, patients or staff are disturbed as little as possible.
FMs need a contractor who is easy to get on site. Tell us what site paperwork you need, such as RAMS, an insurance certificate or CSCS details, and we’ll confirm with the quote.
What affects the price in Old Heath
To price the job, we consider:
- Removal of failed or old sealant
- Joint width, depth and condition
- The total length or number of joints
- Working within restricted access windows
Pricing facade joints depends on how many there are, their condition and the access. Ask us for a fixed quote.
What we need to price the job
The more we know, the firmer the quote. Helpful details to send:
- What the building is and how it’s used
- The asbestos register, for older buildings
- Where the site is, with the postcode
- A wide shot and a close-up of the area
Tell us about the building, the joints and when you need the work done, and a fixed quote will follow. To get it moving, call the office on 01277 525 020 or email us.
How a job runs
We bring the products specified for the job, along with primers and backing rod. Joint faces are cleaned back to sound, dry surfaces, the manufacturer’s primer is applied where it’s called for, and the sealant is tooled off neatly. Work in places the size of Old Heath is planned as a single visit where we can. Clear photographs and measurements help us bring the right products.
- We start with photos, drawings or a visit to see the joints and agree access.
- We confirm the joint type, movement and the specified product.
- The existing bead comes out in full and both faces cleaned back.
- Primer goes on where the product data asks for it.
- Rod goes in to fix the depth, then the joint is sealed and tooled.
- We go over the completed work with you before leaving.
Getting the site ready
- Tell us which areas need to stay in use
- Move anything stored against the joints
- For older buildings, check the asbestos register before work
Ask for a quote
Every job follows the same four steps: send details, get a quote, we seal, guaranteed. The first step is to phone 01277 525 020 or email the details over with what you know.
Advice
Looking after the joints
Your facilities or cleaning team can help the joints last. Share these points with them:
- Keep sills, gutters and drainage paths clear
- Report water ingress at frames as soon as it shows
- Avoid harsh cleaners on facade sealant
- Insist on a full cut-out when joints are renewed
Keep gutters, sills and drainage paths clear. Good drainage keeps water moving off the facade.
Deal with sections that fail early as soon as they show. Small repairs stop small leaks becoming large ones inside the building.
Places near Old Heath
More services for Old Heath
Should maintenance staff do it?
General builders and handymen seal joints, but it isn’t their main trade. A specialist brings correct preparation, depth control with backing rod and a product suited to that particular joint, which is what makes a joint last.
Redoing a failed joint typically costs more than getting it right at the outset, because the whole bead must be removed and the faces cleaned back again. For that reason, many FMs and contractors use a sealant specialist from the outset.
What we’re called out for in Old Heath
A frequent fault is a bead stuck to the joint’s rear face as well as its sides. With no backing, the sealant is restrained and rips when the facade moves.
Things that typically lead to an enquiry:
- Cladding panel joints that have opened up
- Damp patches beside frames after rain
- Hard, chalky sealant that no longer flexes
- Patch repairs that keep failing
Extensions at sites like Oaks Hospital (2.8 miles north-west of Old Heath) usually sit beside working departments, and the mastic follows strict access rules.
Comparing quotes
- Whether old or failed sealant will be cut out, not overlaid
- How joint depth will be controlled
- Who will actually carry out the work
- How long is the guarantee, and what does it include?
Facade sealing in Old Heath: the local picture
Old Heath sits close to the coast, within about 3 miles. On a coastal site, facade and perimeter joints face driven rain and, closer to the beach, salt, so joint design, primers and product choice deserve extra care. Plenty of hotels sit less than 2 miles from Old Heath. Hotel extensions and refits usually have to fit around bookings, so mastic dates are tight.
When a college such as The Sixth Form College Colchester, 1.9 miles to the north-west of Old Heath, builds or refurbishes, the mastic package typically has to fit around students and staff. University estates such as University of Essex, 0.9 miles to the north-east of Old Heath, tend to have a rolling programme of new buildings and refurbishments, each with window perimeters and facade joints to seal.
Old Heath is about 1 mile south of Greenstead, in Essex. Our applicators travel to Old Heath for work on facade joints, handled exactly as we handle every other area. Our Essex coverage takes in 644 places, from busy centres to rural villages. There’s a separate page for London, roughly 51 miles from Old Heath.
Business premises anywhere in CO2, CO1 and CO4 are within our area for facade joints. Buildings on Wick Road, Haven Road and D'arcy Road are within our area for facade joints. Close to Old Heath, our area also takes in The Hythe (1 mile north), Berechurch (1 mile south-west), Rowhedge (1 mile south-east), Greenstead (1 mile north) and Wivenhoe Cross (2 miles east). Nearby towns on our patch include Clacton-on-Sea (11 miles south-east), Maldon (14 miles south-west), Witham (13 miles west), Harwich (15 miles east), Halstead (13 miles west) and Heybridge (13 miles south-west).
What’s near Old Heath
Recent enquiries here include premises near The Bell pub, Thomas Lord Audley School and Language College and Donyland Lodge and the streets around them. The closest station to Old Heath is Hythe station, roughly 1 mile north. Nearby you will also find Essex County Hospital (1.9 miles north-west) and Grandad's Photography Museum (1.5 miles north-west). Green spaces nearby include Cockaynes Wood.