Essex · England
Commercial sealant contractors in IG7
Commercial sealant, construction mastic and joint sealing across IG7, from Chigwell, Chigwell Row and Redbridge, with a fixed quote before we start.
Need sealant work in IG7?
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Towns and villages in IG7
Our services across IG7
- Fire-rated sealing and fire stopping
- Facade and window perimeter sealing
- Commercial washroom and wet-area sealing
- Expansion and movement joint sealing
- Commercial sealant contractors
- Construction and new-build mastic
- Mastic sealing for building owners and managing agents
- Coloured and colour-matched sealant
- Industrial and floor joint sealing
- See all services
Let us know the job and your postcode for a fixed quote: give us a call on 01277 525 020 or use the quote form.
About commercial sealant contractors in IG7
Mastic Doctor has been sealing joints for businesses and contractors since 2005, and the documents buyers ask for are ready: we’re CHAS accredited and a Constructionline member, our applicators hold CSCS cards, and we carry five million pounds of public liability insurance. Let us know which site documents you need and they’ll be confirmed with the quote. We work on window and door perimeters, washrooms and tea points and movement joints in walls and floors, and what we’re called in for most is gaps behind commercial kitchen worktops and sinks and hardened, chalky sealant on south-facing or exposed elevations.
Before we leave any area, the masking comes off, the area is cleaned and every joint is checked, ready for your sign-off. Where the sealant needs time to cure before use, we tell you and sign the area.
- Send details through our quote form, or ask for a site visit.
- We diagnose the cause of failure and price a fixed scope.
- Where parts of the building must stay open, the work is phased.
- Old sealant is cut out completely, never sealed over.
- A suitable product for each joint goes in at the right depth and is tooled.
- A final walk-round, then the 12-month guarantee applies.
Pricing in IG7
The product called for affects the cost, as does the preparation each joint needs. Access, phasing and site rules also count.
Why clients in IG7 choose us
- Sealing commercial buildings since 2005
- A range of standard colours, depending on the product
- One number for every site we cover
- Products installed to the manufacturer’s instructions
Request a quote
Every job follows the same four steps: send details, get a quote, we seal, guaranteed. To take the first step, phone 01277 525 020 or email the details over.
Local landmarks in Chigwell
Around Chigwell, our work takes us to commercial buildings near Chigwell Row Wood, West Hatch High School and St Winifred. Nearby too are Limes Farm Infant School and Nursery (0.5 miles south-east) and The Kings Head Hotel (0.8 miles north). The nearest railway station is Chingford station, about 3.2 miles north-west. Nearby you’ll also find The Epping Forest Museum (3 miles north-west) and Claybury Hospital (0.8 miles south-west). Not far away are Roding Valley Meadows and Pole Hill.
Commercial sealant contractors across IG7: the area picture
Across IG7, from Buckhurst Hill, Chigwell and Fairlop to the smaller places between, commercial buildings run from high-street shops and offices to hotels, schools and business parks. Because we cover all of it, multi-site occupiers can bring every building under one quote, with colours matched site to site where the brand needs it.
The South East is one of the UK’s drier regions, but external sealing in IG7 still needs a dry joint and the right temperature, and damp or frosty mornings can hold it up.
Chigwell: Refits at hotels like The Kings Head Hotel, 0.8 miles north of Chigwell, bring joints at vanity tops, bars and reception desks that guests see every day. Offices and shops close to stations such as Chingford station (to the north-west of Chigwell) tend to be busy all day, so sealant work is planned around opening hours.
Why it fails
When a bead peels cleanly off one face, it has failed in adhesion. The usual causes are poor preparation, a missed primer, contamination on the joint face or sealant bonded to the base of the joint. It’s one of the commonest faults we find on earlier work.
Clients typically get in touch after noticing one or more of the following:
- Mouldy silicone around WCs, urinals and vanity tops
- Movement joints packed with grit and debris
- Hardened, chalky sealant on south-facing or exposed elevations
- Untidy joints in a reception, shop floor or lobby
Work for main contractors and building owners
FMs need a contractor who is easy to get on site. Let us know the documents you need (RAMS, insurance certificate, CSCS details) and we’ll confirm them with the quote.
Agents, factors and owners’ representatives all follow the same route: send details, get a fixed quote, we seal, guaranteed. We can agree access arrangements and keyholder contacts beforehand.
Cost factors for sealant joints
Your fixed quote is built from the real scope. It takes account of:
- The site’s rules and procedures
- Joint width, depth and condition
- Removal of failed or old sealant
- Phasing around occupants
A quote for sealant joints depends on quantities, condition and access, plus any specification you’re working to. Call for a quote.
Sending details for a quote
Whether it’s one area or a whole building, the same details help:
- Asbestos survey details if the building is older
- Clear photographs of the problem areas
- How the joints are reached, and at what height
- Whether the building will be occupied during the work
Need a figure for a tender or a budget? We’ll quote against your scope and drawings that you can work with. For a chat about it beforehand, ring 01277 525 020 or email a schedule or drawings.
Looking after the joints
Sealant joints are maintenance items, and how long they last depends on how they’re treated. Our advice:
- Make sure ventilation in wet areas is switched on and working
- Report cracked or peeling sealant early
- Look at the sealant around anything that has been moved or replaced
- Make sure contractors see the asbestos survey before cutting out old mastic
Later works are the usual way new joints get damaged. Shop refits, new services and replaced fittings often break the seal around them and the joint gets left open. If that happens, phone 01277 525 020 or send details through our quote form and we’ll price putting it right.
An open joint in a food area or toilet collects dirt and moisture that cleaning can’t reach. Cleanability is something environmental health officers pay attention to, which makes sound joints worth keeping on top of.
Surface by surface
Movement joints in walls and floors
Floor joints that take trolleys or forklifts need a tougher filler or sealant. The choice comes down to how much the joint moves and what runs over it, and tell you if the edges need repairing first.
Commercial kitchens and tea points
Kitchen joints along worktops, sinks, splashbacks and wall cladding collect grease and moisture. Proper degreasing comes before any new sealant, with a food-safe or hygienic product wherever food contact can happen.
Questions about IG7
How do we get a quote?
Send photographs, drawings or a list of locations. If a visit is needed we’ll book one, and a fixed quote follows.
When can the area be used after sealing?
We will confirm how long the chosen product needs to cure, and sign any area that should be left alone.
Are your applicators CSCS-carded?
Yes. Should the site need card details in advance, tell us and we’ll confirm them with the quote.
Is it fine to apply new sealant on top of old?
No, never. Sealing over old material is one of the classic causes of early joint failure, so everything comes out first.
Can you follow the specification on our project?
Yes. Include it with the drawings when you ask for a quote, and the quote will be based on it, flagging anything that needs clarifying.
Do you check for asbestos before removing sealant?
On older buildings, our first request is the asbestos survey. The duty to manage asbestos sits with the dutyholder.
Is the old sealant taken out first?
Removal comes first, every time. After that come cleaning, primer where needed, backing and the new sealant.