Essex · England
Commercial sealant contractors in CO1
Sealant work for contractors, FMs and building owners across CO1, covering The Hythe, Colchester and Camulodunum, with a fixed quote before we start.
Sealant work in CO1
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Places in CO1
Our services across CO1
- Commercial washroom and wet-area sealing
- Fire-rated sealing and fire stopping
- Mastic sealing for building owners and managing agents
- Industrial and floor joint sealing
- Coloured and colour-matched sealant
- Construction and new-build mastic
- Commercial sealant contractors
- Facade and window perimeter sealing
- Expansion and movement joint sealing
- All services
Let us know the job and your postcode and we’ll come back with a price: phone 01277 525 020 or send details through our quote form.
Our commercial sealant contractors service in CO1
Mastic Doctor has been sealing joints for businesses and contractors since 2005, and the paperwork side is in order: we are CHAS accredited and a Constructionline member, our applicators hold CSCS cards, and we carry five million pounds of public liability insurance. If your site needs RAMS, an insurance certificate or CSCS details, say so and we’ll confirm with the quote. Site teams most often ask us about sanitary sealant that has gone black and patchy and water staining near frames, panels or ceilings, on floor and threshold joints, kitchen worktops and splashbacks and window and door perimeters.
We begin with a short walk round with whoever looks after the building, agreeing which joints are in scope, where to start and what must stay open. Then we strip out anything that has failed, prepare every joint and seal it.
- We begin with whatever information you have, whether that’s photographs, a drawing or a list of locations.
- We work out why the joints have failed and fix a quote for the agreed scope.
- We plan around your site hours and access windows, phasing the work where areas have to stay in use.
- The failed bead is removed and the joint faces cleaned until they’re sound and dry.
- Backing and primer go in where needed, then the chosen sealant is applied and tooled.
- Each area is inspected, signed off and backed by our 12-month guarantee.
What you will pay
The work involved drives the cost: stripping out, preparation, sealing, access and phasing. Call for a quote.
Why appoint us
- Health and safety: CHAS accredited
- Sealing commercial buildings since 2005
- Coloured sealants to suit the setting, where available
- One contact handling all your sites
Get a fixed quote
Tell us about the building, the joints and when you need the work done, and a fixed quote will follow. To get it moving, give us a call on 01277 525 020 or email a schedule or drawings.
Landmarks near The Hythe
Recent enquiries here include premises near Kendall Church of England Primary School, Colchester Academy and The Rising Sun Public House, among other places. You will also find Salary Brook Local Nature Reserve (0.8 miles east), Donyland Lodge (1.5 miles south) and Church of St Leonard at the Hythe (under half a mile north-west). There’s a railway station in The Hythe itself: Hythe station. Other landmarks nearby include Colchester Castle (1.1 miles north-west) and Essex County Hospital (1.6 miles west). For a walk, there’s Cockaynes Wood.
Commercial premises across CO1
Across CO1, from Colchester, Camulodunum and Greenstead to the smaller places between, commercial buildings run from high-street shops and offices to hotels, schools and business parks. Because we cover all of it, multi-site occupiers can bring every building under one quote.
All of Greater London is inside the ULEZ, and much of the South East is within easy reach of the capital, so jobs in CO1 are planned with access, loading and parking in mind.
The Hythe: A unit on an estate like Port Lane Industrial Estate (to the south-west of The Hythe) typically has an office front, a trade counter and staff facilities with joints of their own. Offices and shops close to stations such as Hythe station (to the north of The Hythe) tend to be busy all day, so sealant work is planned around opening hours.
Surface by surface
Commercial kitchens and tea points
Kitchen joints along worktops, sinks, splashbacks and wall cladding collect grease and moisture. They’re degreased thoroughly before resealing.
Fire-rated seals where specified
Not every penetration suits a sealant. Collars, wraps, batts and boards are specified for other services and gaps.
Why act early?
Reactive resealing, a leak at a time, tends to cost more overall than a plan. Planning the work across a year or a portfolio means fewer separate visits and a predictable spend. We can help you prioritise, starting with the joints most likely to let water in.
Comparing quotes
- How long is the guarantee, and what does it include?
- Can the work be phased to keep areas open?
- How the existing material will be dealt with
- What level of public liability insurance do they hold?
Quoting for work in CO1
To price the job, we consider:
- How much existing material needs removing
- Travel to remote or island sites
- The size and state of each joint
- Induction, permit and paperwork requirements
The price depends on the quantity of joints, what has to come out first and how the joints are reached. Call for a fixed quote when you are ready.
What to include in your enquiry
There’s no need for a formal survey. These details are enough to start:
- Rough lengths or quantities, or drawings if you have them
- Your programme or deadline
- The asbestos register, for older buildings
- The postcode of the building
Send details, get a quote, we seal, guaranteed: that’s how every job runs. The first step is to call the office on 01277 525 020 or email drawings and photos with what you know.
Should maintenance staff do it?
Site maintenance staff can often handle a short internal joint. Where it goes wrong is preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.
Using site staff can make sense for a small touch-up, but larger jobs are different: a specialist works through quantities efficiently, leaves a consistent finish and backs it with a 12-month guarantee.
Work for main contractors and building owners
Housing associations and managing agents often need work done across blocks and communal areas. We phase the work so people keep access, with each stage agreed with your site contact.
Hospitality, education, healthcare, office and retail clients come to us directly as well. The work is planned around how the building runs, so guests, pupils, patients or staff are disturbed as little as possible.
CO1: questions and answers
Can you work to our specification?
Yes. The specification and the manufacturer’s installation guidance are what we work to, and we raise anything unclear before work begins.
Is it OK to apply fresh sealant over existing beads?
Removal of the failed sealant is always part of the job. New sealant can’t grip the old bead, so laying over it never lasts.
How long will the new sealant last?
It depends on movement, UV and weather, cleaning, traffic and the product. Treat them as maintenance items and inspect them regularly.
Which sealant will you use?
A specification, where there is one, decides it. Without one, the joint decides: how much it moves, what it bonds to and whether it’s wet, trafficked or fire-rated.
What do you need from us to quote?
Start with whatever information is to hand. We follow up with questions or a visit where needed, then a fixed quote.
Is your work guaranteed?
The work is guaranteed for 12 months. Should a joint we sealed give trouble during those 12 months, let us know and we will look at it.
Can areas stay open during the work?
Most of the buildings we work in stay occupied. We agree the order of areas, protect what’s nearby and close off only the section we’re sealing for as long as the cure needs.