Essex · England
Commercial sealant contractors in CO14
We cover every part of the CO14 postcode district, including Walton-on-the-Naze and Frinton-on-Sea. Every joint is properly prepared, with a 12-month guarantee.
Sealant contractors for CO14
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Areas within CO14
Services in CO14
- Construction and new-build mastic
- Commercial sealant contractors
- Facade and window perimeter sealing
- Coloured and colour-matched sealant
- Commercial washroom and wet-area sealing
- Expansion and movement joint sealing
- Industrial and floor joint sealing
- Mastic sealing for building owners and managing agents
- Fire-rated sealing and fire stopping
- See all services
Tell us what needs doing and your postcode and we’ll come back with a price: give us a call on 01277 525 020 or send photos by email.
Neighbouring districts
More in Essex
All places in Essex
Every area we cover
Our commercial sealant contractors service in CO14
On a commercial site, sealant turns up in more places than people expect: washroom fittings, kitchen worktops, window boards, partition heads and the line where floors meet walls. Externally it keeps rain out of frame perimeters, panel joints and movement joints. We deal with internal and external sealant joints alike, picking the product for each location rather than one tube for everything. We work on movement joints in walls and floors, washrooms and tea points and external facade joints, and what we are called in for most is wall and floor joints that have lost their seal and weathered facade sealant that no longer flexes.
Before we leave any area, we remove the tape, clean down and inspect every joint. If an area should be left alone while the sealant cures, we say how long and put signs out.
- You send photos, drawings or a list of the joints and areas involved.
- The failure is diagnosed and a fixed quote issued for the work agreed.
- Before anything is cut out, we agree access, timings and sequence.
- The failed bead is removed and the joint faces cleaned until they’re sound and dry.
- Backing and primer go in where needed, then the chosen sealant is applied and tooled.
- Each area is inspected, signed off and backed by our 12-month guarantee.
How we quote
The product called for affects the cost, as does the preparation each joint needs. Access, phasing and site rules also count.
Why choose Mastic Doctor
- Public liability insurance in place
- CSCS-carded applicators
- Work to your specification and the manufacturer’s guidance
- A Constructionline member, so easy to vet
Ask for a quote
Send details, get a quote, we seal, guaranteed: that’s how every job runs. To take the first step, ring 01277 525 020 or send photos by email.
Around Walton-on-the-Naze
In Walton-on-the-Naze, that means premises near Walton on the Naze Primary School, Tendring Technology College and The Victory pub, among other places. Other local landmarks include Frinton Park (0.8 miles south-west) and Church of All Saints (under half a mile east). Walton-on-the-Naze has its own railway station: Walton-On-The-Naze station. For a walk, there’s The Naze Nature Reserve.
Where commercial joints are in CO14
The commercial stock in CO14 mixes older town-centre buildings with newer offices and units, in places such as Walton-on-the-Naze and Frinton-on-Sea and beyond. Surfaces decide the sealant, from masonry to powder-coated frames and shop-fit panels.
We work across Greater London and the South East counties, so jobs in CO14 are planned with access, loading and parking in mind. CO14 includes coastal places, where facades, frames and external slabs take more weather than inland. Product choice and joint preparation matter more there.
Walton-on-the-Naze: Shops and cafés around stations like Walton-On-The-Naze station (to the south-east of Walton-on-the-Naze) trade from early, so work is timed around them. Shop fits at places like Triangle Shopping Centre, 0.8 miles to the west of Walton-on-the-Naze, leave counters, frontages and floor edges where the sealant colour is part of the finish.
Keeping the joints sound
Every sealant joint needs some looking after, and their life depends on movement, exposure, cleaning and use. Our advice:
- Keep a record of which joints were resealed and when
- Keep washroom and kitchen extraction working
- Check joints after other trades have worked nearby
- Keep abrasive pads and scrapers off resealed joints
Put sealant on the planned maintenance checklist. A periodic look catches splits and lifting edges early, especially on exposed elevations and in washrooms. Should something look amiss, you can phone 01277 525 020 or send photos by email and send a picture.
Once sealant fails in a movement joint, grit and debris get in. With nothing soft to close against, the materials either side take the load and start to break up. That turns a sealant job into something bigger.
For managing agents and facilities managers
CHAS accredited and a Constructionline member, we make supplier vetting simple. We’re fully insured, and our insurance certificate can go with the quote.
Main contractors use us as their sealant subcontractor. We work to your programme, your specification and your site rules, with CSCS-carded applicators on site.
Different surfaces, different methods
Shop fronts and retail fit-outs
Shop fits put sealant right in front of clients. Counters, display units, shopfront frames and floor trims all need a neat line, frequently colour-matched to the fit-out. We will confirm the colours available for the specified product.
Washrooms and toilets
Around WCs, urinals, vanity tops, IPS panels and cubicles, sealant is wet most of the day. Old sealant comes out and a sanitary silicone with anti-mould additives goes in.
Honest limits
Being straight saves everyone time. New sealant won’t cure:
- Roof leaks that only look like a joint problem
- Suspect materials that need testing and specialist removal
- A dripping trap, valve or pipe behind a fitting
What we’re called out for in CO14
A split down the middle of the bead tells a different story. Usually the movement was too much for the sealant chosen. Replacing it like for like rarely holds.
Clients normally get in touch after noticing one or more of the following:
- Movement joints packed with grit and debris
- External beads that have gone brittle and cracked
- Window and door perimeter joints that have cracked open
- Messy, uneven beads from earlier work that let the building down
Questions we’re asked in CO14
Does the weather affect the work?
For external joints, yes. Sealant needs a dry joint and a temperature within the product’s range, so damp, frosty or very cold days can stop external work. Inside work is seldom held up.
Could the old sealant in an older building contain asbestos?
Some older mastics did contain asbestos. That’s why we ask for the asbestos information first, and stop if a material is suspect until it’s tested. HSE guidance on asbestos is a useful reference.
Is the old sealant taken out first?
Removal comes first, every time. After that come cleaning, primer where needed, backing and the new sealant.
Can you handle sealant work across several sites?
Yes, we can. Give us the sites and the scope at each, and fixed prices follow, with a suggested sequence.
Do your applicators hold CSCS cards?
Yes. Our applicators hold CSCS cards, as many construction sites ask for.
Will you just go over the old sealant?
No, never. Sealing over old material is one of the classic causes of early joint failure, so everything comes out first.
Do you work to architects’ specifications?
Yes. Include it with the drawings when you ask for a quote, and we’ll price the work to it.