Redhall floor joint sealing
Floor joint sealing in Redhall, backed by over 20 years in commercial sealing. Fully insured and CHAS accredited.
- Old filler gone hard, cracked or loose
- Dock area joints that have failed first
- Drivers complaining about joints on a route
Floor joint sealing for businesses in Redhall
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
About our floor joint sealing in Redhall
Floor joint sealing for us covers warehouse aisles, loading bays, production halls, retail floors and showroom slabs. Pricing depends on the length of joint, how worn the edges are and when we can get in, and the quote is fixed before we mobilise. We work on joints along racking aisles, construction joints and forklift and pallet-truck routes, and the failures we are asked to look at most are a rough ride across broken joints and failing joints at loading bays and dock doors. One point of contact handles commercial sealant work in Redhall from the first photographs to the final walk-round, whether it’s one building or several.
In Scotland’s cities, buildings from car parks and malls to university and hospital estates rely on movement joints. When the sealant goes, water and grit get in, and a Scottish winter makes it worse.
Guaranteed is the last step of every job. You get a 12-month guarantee on our workmanship, and the quote explains what it covers.
- Location
- Redhall (EH14, EH11, EH13)
- Region
- Edinburgh
- Guarantee
- 12 months on our workmanship
- Quote
- Quoted before any work starts
- Call
- 01277 525 020
- Page updated
- 3 November 2026
Your questions answered
Does your area include sites such as Hailes Park Industrial Estate, near Redhall?
Yes. Estates, retail parks and business parks around Redhall, Hailes Park Industrial Estate among them, are all within reach. A few photos and the unit address let us price the work.
Will our site in Redhall have to close for joint sealing?
Typically not: we work in sections and hand each one back once it has cured. Tell us which hours and entrances we can use and we’ll plan from there.
Will we need to close the floor?
The work is phased. Areas are taken out of use a section at a time. Tell us your site hours and access windows and we will plan around them.
Which sealant will you use?
A specification, where there is one, decides it. Without one, the joint decides: its movement, its surfaces and what it has to cope with.
What site paperwork can you supply?
Requirements differ from site to site, so tell us what you need and we will confirm it when we quote.
What happens if old sealant might contain asbestos?
The duty to manage asbestos sits with the building’s dutyholder, so we will ask for the register before work on an older building. If anything suspect turns up, we stop until it’s tested.
How do we get a quote for floor joints?
Use our quote form, or email photos and a plan, with the traffic on each area. We then send a fixed quote that shows the products and zones.
Where floor joints take the most wear near Redhall
Redhall is on Scotland’s drier eastern side. Freezing weather and salt still attack open external joints. Sealing them in drier months limits winter damage. Less than 3 miles from Redhall there are at least three named estates and business parks. Sites like these are full of saw-cut floor joints, yard slabs and car park joints.
For an estate such as Spire Murrayfield Hospital (1.5 miles north of Redhall), the joints in ramps, decks and long building elevations all need attention over time. Schools like Merchiston Castle School often have long brick elevations with movement joints that age quietly. Estates like Hailes Park Industrial Estate (0.6 miles west of Redhall) combine warehouse slabs, yards and loading bays, all with joints under wheels.
Redhall is about 2 miles south-west of Edinburgh, in Edinburgh. We send applicators to Redhall for floor joints, handled exactly as we handle every other area. Redhall is one of 174 places in Edinburgh on our list for floor joints.
Work on floor joints is covered throughout EH14, EH11 and EH13, for business premises of every kind. Among the streets we cover are Redhall Road, New Mart Road and Katesmill Road. Being close to the A71, Redhall is straightforward for us to reach. Just outside Redhall, we also work in Parkhead (1 mile north-west), Longstone (1 mile west), Kingsknowe (1 mile south-west), Chesser (1 mile north-east) and Saughton (1 mile north-west). Nearby towns on our patch include Leith (5 miles north-east), Bonnington (4 miles north-east), Greenside (4 miles north-east), Broughton (4 miles north-east), Bellevue (4 miles north-east) and Silvermills (3 miles north-east).
Landmarks near Redhall
We work on buildings around Balgreen Primary School, Cross Keys Tavern and Saughton Park and the streets around them. There’s a railway station in Redhall itself: Kingsknowe station. Other landmarks nearby include Merchiston Tower (1.8 miles north-east) and The Gyle Shopping Centre (2.5 miles north-west). Open spaces near Redhall include Duddingston Loch and Craiglockhart Hill.
What sets the cost
The price varies from site to site. It mainly depends on:
- Specialist products, such as fire-rated or hygienic sealants
- Phasing around occupants
- Whether old sealant has to be cut out first
- Backing rod, priming and other preparation
No two sites price the same: joint size, product, access and site hours all play a part. Send the details and a fixed figure follows.
Sending details for a quote
A good diagnosis starts with the right details. Tell us:
- Whether an asbestos survey exists
- How the joints are reached, and at what height
- Where the site is, with the postcode
- Whether the building will be occupied during the work
Specifications, drawings and tender packages are welcome with any enquiry, and we’ll price against exactly what is specified. For smaller jobs, photographs and a description will do.
Other services in Redhall
Doing it in-house
The visible bead is only part of the job. Backing rod, primer where specified and a joint designed to move with the building are where general trades tend to cut corners.
For most general trades, sealant is a sideline. A specialist brings correct preparation, depth control with backing rod and a product suited to that particular joint, which is what makes a joint last.
Why it’s worth doing now in Redhall
Open joints are where dirt collects, out of reach of the floor cleaner. In shops, showrooms and clean production areas that matters for hygiene and appearance. Flush, filled joints leave nothing for cleaners to dig out. In a tenement or shared city building, water from a failed joint can reach other owners’ property. Acting early avoids disputes and bigger repairs.
Access often affects the price as much as the sealing: joints within easy reach take less time than ones that need access equipment. Tell us how the joints are reached and call for a quote.
Why us?
- Joints cleaned back to sound surfaces
- CHAS accredited
- One contact handling all your sites
- Constructionline member for supplier checks
See how commercial sealant jobs are priced and our accreditations and insurance.
When something else is needed
Honesty saves time and money. Fresh joints won’t solve:
- A failing floor coating, which is a flooring contractor’s job
- A floor that is out of level for the racking or trucks
- Joint edges that have already broken away, which need repairing before filling (we will tell you if so)
If in doubt, call the office on 01277 525 020 or send photos by email and we will say what we think.
Where we work in Redhall
- Saw-cut induced joints
- Joints along racking aisles
- Forklift and pallet-truck routes
- Retail and showroom floors
- Loading bays
- Construction joints
Surface by surface
Semi-rigid joint fillers
Semi-rigid fillers are designed to support joint edges under hard wheels. They allow only small movement so timing matters on newer slabs.
Loading bays and dock areas
Bays can be treated one or two at a time so goods in and out carry on. Your site hours and access windows set the order.
Our process
Before any cutting starts, the area is protected: tape along each joint edge and covers over finishes, stock and equipment close by. On site, the work usually takes anything from a day for one loading bay to several days for a large floor, split into phases, and our waste is bagged and taken away as we go. Work on a big city site in Scotland normally involves inductions and permits. Tell us the rules and we’ll work to them.
- Each area is assessed for joint width, arris damage and the wheels that cross it.
- You get a fixed quote with the product and the phasing set out.
- Each joint is cleared of old fill and dirt and taken back to clean, sound edges.
- Dust is extracted from the joint and primer applied where the manufacturer specifies it.
- We fill each joint to depth and finish it flush so wheels roll straight across.
- Each phase reopens when the product is ready for wheels, then we start the next.
Before we start on site
- Tell us what induction or permit system the site runs
- Have the specification and drawings to hand
- Send asbestos survey details if the building is pre-2000
Request a quote
To get a fixed quote, give us a call on 01277 525 020 or email drawings and photos, telling us the site location and the nature of the job. You can also send details through our quote form.