Industrial and floor joint sealing in Broughton, Edinburgh
Floor joint sealing and filling in warehouses, factories and industrial units in Broughton. CHAS accredited, Constructionline member, with a 12-month guarantee on workmanship.
- Broken arrises where pallet trucks cross
- Open saw cuts full of debris
- Trucks and loads jolting over damaged joints
Need floor joint sealing in Broughton?
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Floor joint sealing for commercial buildings in Broughton
Before quoting, we look at what the floor is telling us: joint widths, whether the joints are still opening, what runs over them and how the edges have held up. That tells us whether semi-rigid filler or flexible sealant suits each run and the answer can differ from one zone to the next. If you have saw-cut joints left open and packed with grit and a gap opening alongside old joint filler, we can put it right. For commercial sealant work in Broughton, you deal with one contact from quote to sign-off, whether it’s one building or several.
Around the edges of Scotland’s cities are warehouses, trade counters and distribution units, whose floor joints take forklift and pallet-truck traffic daily. We work in phases with a product suited to the traffic, so operations carry on.
Every job we finish is backed by a 12-month workmanship guarantee. If our installation lets you down in that time, we return and fix it.
- Location
- Broughton (EH7, EH1, EH3)
- Wider area
- Edinburgh
- Cover
- 12 months on our workmanship
- Price
- A fixed quote before we start
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
From enquiry to sign-off
We schedule the visit to fit the site hours and access windows you give us. While we are working, the area stays contained and tidy, and your contact hears from us before we move to the next area. For premises in Broughton, tell us about access times, shared entrances and any building rules, so the work can be phased and areas kept in use.
- We look at joint widths, edge condition and the traffic on each route.
- The quote fixes the price, names the filler or sealant and shows how the floor will be zoned.
- Old filler, debris and contamination are cut or routed out back to clean concrete.
- Dust is extracted from the joint and primer applied where the manufacturer specifies it.
- Filler or sealant goes in to the right depth and is finished flush with the slab.
- We tell you when each zone can carry trucks again and move on to the next.
Preparing the site
- Warn occupants and staff about the work
- Tell us which areas need to stay in use
- Arrange parking or a loading space
Get a fixed quote
A handful of photos and a postcode is the fastest way to a quote. Upload them with the quote form, or give us a call on 01277 525 020 or email the details over if you’d rather talk the job through.
Advice
Warehouse floors and decks around Broughton
Broughton is within about 1 mile of the coast. Near the sea, external slabs, ramps and decks see salt air and driven rain as well as their usual loads, and edges left open tend to break up faster. Broughton is on Scotland’s drier eastern side. Freezing weather and salt still attack open external joints. Sealing them in drier months limits winter damage.
University campuses such as University of Edinburgh - Holyrood Campus, 0.6 miles to the south-east of Broughton, have car parks, paved walkways and building elevations with movement joints. Office parks like Beaverbank Business Park (to the north-west of Broughton) have decks, ramps and clad elevations whose joints take movement every day.
Broughton is about 1 mile north-east of Edinburgh, in Edinburgh. Broughton sits inside our coverage, and jobs here get the same fixed quote and 12-month guarantee as anywhere else. Across Edinburgh, 174 places are covered, Broughton among them.
We cover the EH7, EH1 and EH3 postcode districts. Buildings on York Lane, Meuse Lane and Canon Lane are within our area for floor joints. With the A900 nearby, Broughton is straightforward for us to reach. Close to Broughton, our area also takes in Gayfield (1 mile north-east), Greenside (1 mile south-east), Bellevue (1 mile north-west), New Town (1 mile west) and Canonmills (1 mile north-west). Nearby towns on our patch include Queensferry (8 miles west), South Portobello (3 miles east), Southhouse (4 miles south), Gilmerton (4 miles south-east), Muirhouse (3 miles west) and Slateford (3 miles south-west). Among the larger centres in Edinburgh is Broughton, and its commercial and public buildings are all within our area.
Local landmarks in Broughton
Recent enquiries here include premises near King George V Park, McDonald Road Library and Public House. Broughton has its own railway station: Edinburgh Waverley station. Nearby you’ll also find Victorian Pharmacy Museum (under half a mile south-west) and St. James Centre (under half a mile south). For a walk, there’s Salisbury Crags and The New Leaf Co-op.
What affects the price in Broughton
Quotes vary with the job. It mainly depends on:
- How much existing material needs removing
- Joint width, depth and condition
- How much there is to seal
- How accessible the joints are
Access can matter as much as the joints themselves: easy-to-reach joints are quicker than those that need equipment to get to. Mention the access as part of your enquiry.
Sending details for a quote
For an accurate fixed quote, we need to understand the site. Useful things to include:
- Anything awkward about access or site hours
- Where the site is, with the postcode
- Whether the building will be occupied during the work
- Specification clauses that apply
Let us know the site, the scope and your timescale, and we will put a fixed quote together. To get it moving, ring 01277 525 020 or use the quote form.
How the job changes by surface
Flexible floor sealants
A flexible sealant suits perimeter and movement joints away from the heaviest traffic. Closed-cell backing rod goes in first, keeping the bead shallow and gripping only the two faces.
Loading bays and dock areas
Loading bays combine the heaviest turning loads with wet tyres and cold air from open doors. Joints here normally fail first so many programmes begin here.
Why deal with it now?
Duct tape or a general builders’ sealant can seem to buy some time. None of it is designed for wheel loads, and it normally ends up dragged across the floor. A product chosen for the traffic and movement does the job once. In Broughton, as across Scotland, rain finds any gap, so a split or hardened joint lets water into the wall. Resealing promptly protects the stone and the interior.
The specified product makes a difference, as does the preparation each joint needs. Access, phasing and site rules also count.
Why us?
- Work to your specification and the manufacturer’s guidance
- CHAS accredited contractor
- Clear, fixed quotes
- Constructionline member for supplier checks
Common problems we fix in Broughton
Unfilled joints soon pack with grit, shrink-wrap scraps and pallet splinters. Packed debris acts like a wedge every time a wheel crosses so the arrises break sooner.
Clients usually get in touch after noticing one or more of the following:
- A gap opening alongside old joint filler
- Brittle joint filler breaking up
- Open saw cuts full of debris
- Loading bay joints breaking down
For an estate such as Western General Hospital (Edinburgh), 1.8 miles west of Broughton, the joints in ramps, decks and long building elevations all need attention over time.
What your quote should include
- How they’ll work around occupants
- Is depth set with backing rod, or bond-breaker tape in shallow joints?
- Whether primer will be used where the manufacturer specifies it
- Is the sealant right for the movement and the substrate?
Keeping the joints sound
After handover, a little attention goes a long way:
- Clear packed debris from open joints regularly
- Keep photos of joints that look like they’re failing
- Check joint lines on busy aisles regularly
- Expect fillers on young slabs to need a top-up
A routine walk of the busiest aisles shows how the joints are holding up. Look for separation down one side, new chips in the arris and debris gathering and keep photos so changes are easy to compare.
Grit in an open joint does damage every time a wheel crosses it. Filling it ends that cycle while it is still a straightforward job.
Your questions answered
Is Beaverbank Business Park, near Broughton, within your area?
Yes. We cover Broughton and the area around it, including industrial estates, business parks and retail parks such as Beaverbank Business Park. Photos and a short description are enough for a first look.
Is hospital work, at somewhere like Western General Hospital (Edinburgh), something you do?
Yes, hospitals are one of the sectors we cover. Work is phased so departments keep running, under the site’s own rules.
Is the floor joint work guaranteed?
A 12-month guarantee covers the work we do. It covers our workmanship, not later slab movement or damage from impacts.
Do you hold CHAS accreditation?
Yes. We’re CHAS accredited and a Constructionline member, which helps with supplier vetting.
What do you need from us to quote?
Use our quote form, or email photographs and a plan and tell us what runs on the floor. A fixed quote follows that shows the products and zones.
How do you choose the sealant?
Where there’s a specification, we use the product it names. Otherwise, we recommend a product to suit the joint’s movement, the substrate and the conditions, following the manufacturer’s guidance.
Which is better for warehouse joints, filler or sealant?
The answer comes from the traffic and the joint’s movement. Forklift routes generally call for a semi-rigid filler that holds the arrises and joints with more movement take a flexible sealant.