Floor Joint Sealing contractors in Longstone
Floor joint sealing and filling in warehouses, factories and industrial units throughout Longstone and nearby, by CSCS-carded applicators. CHAS accredited and fully insured.
- Joint fill separating from the concrete
- Old filler gone hard, cracked or loose
- Loading bay joints breaking down
Floor joint sealing for Longstone sites
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Floor joint sealing in Longstone
For sites in Longstone and across Edinburgh, the process is short: you send details, we send a fixed quote, the joints are done and the 12-month guarantee follows. A rough length of joint, photos of the worst areas and a site plan let us give a quick quote and a visit can be arranged where that is easier. If you have untidy open joints in a retail unit and open saw cuts full of debris, we can help, on saw-cut induced joints, forklift and pallet-truck routes and retail and showroom floors alike. Facilities teams, main contractors and managing agents in Longstone tend to want the same three things: a clear scope, tidy work and joints that don’t fail again.
Around the edges of Scotland’s cities are warehouses, trade counters and distribution units, whose floor joints take forklift and pallet-truck traffic daily. We work in phases with a product suited to the traffic, so operations carry on.
The 12-month guarantee covers our workmanship: the preparation, the sealing and the tooling. Damage, later alterations by others and movement beyond what the joint was designed for sit outside it.
- Where
- Longstone (EH14, EH11, EH13)
- Wider area
- Edinburgh
- Guarantee
- A 12-month guarantee
- Price
- A fixed quote before we start
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
How the job changes by surface
Retail and showroom floors
Retail joints see trolleys, footfall and scrubber-driers. The product is chosen for that traffic and the appearance is part of the brief.
Loading bays and dock areas
We normally work through dock areas a few bays at a time so deliveries keep moving. Tell us your site hours and access windows and we’ll plan around them.
Quoting for work in Longstone
Before we quote, we look at:
- The product specified
- Travel to remote or island sites
- The size and state of each joint
- The site’s rules and procedures
Quantities, awkward access and phased working all shape the price. Site requirements like inductions and permits play a part as well.
What we need to price the job
A few photographs plus some basic facts will normally do. It helps to include:
- Any specification or named product
- Whether an asbestos survey exists
- Anything awkward about access or site hours
- What the building is and how it’s used
To get a fixed quote, give us a call on 01277 525 020 or email a schedule or drawings. Our quote form is another easy route.
Signs you need floor joint sealing in Longstone
Small, hard wheels put a lot of load through a very small area. Where a joint is open, the wheel dips and strikes the far edge, and repeated impacts break the concrete away.
Things that typically lead to an enquiry:
- Loading bay joints breaking down
- A rough ride across broken joints
- Joint fill separating from the concrete
- Chipped and spalling edges along forklift routes
At places like Dumbryden Industrial Estate, 0.6 miles south-west of Longstone, joints are sealed a section at a time so operations carry on.
Questions to ask before you book
- Will RAMS and insurance details be available?
- The terms of the workmanship guarantee
- Proof of insurance
- Can the work be phased to keep areas open?
Leave it or put it right?
Every jolt over a broken joint passes into the truck, the load and the driver. That means extra wear on wheels and a rougher ride for staff, which nobody budgets for. A filled joint takes most of that out. In a Scottish city, access often needs scaffold, permits or factor approval, so it makes sense to renew every failing joint while it’s in place.
No two sites price the same: joint size, product, access and site hours all play a part. A fixed quote follows once we understand the job.
Why us?
- Work to your specification and the manufacturer’s guidance
- A Constructionline member, so easy to vet
- CSCS-carded applicators
- CHAS accredited
What sealant work can’t fix
Being straight saves everyone time. Fresh joints won’t solve:
- Spalled arrises, which need an edge repair first
- Cracks across panels caused by settlement or overload
- Unstable slabs moving under traffic
Not sure which it is? You can call the office on 01277 525 020 or use the quote form and we’ll tell you honestly before you book.
What we seal
- Forklift and pallet-truck routes
- Retail and showroom floors
- Saw-cut induced joints
- Loading bays
- Construction joints
- Joints along racking aisles
Floor joint sealing around Longstone: how the place shapes the job
At least three named trading, business or retail sites lie within about 3 miles of Longstone. Their warehouses, yards and car parks are exactly where joints take the most punishment. Being in the east of Scotland, Longstone gets less rain than the west coast. Freezing weather and salt still attack open external joints. Resealing before the cold months helps protect the edges.
Schools such as Merchiston Castle School have movement joints in their walls and floors that are easy to overlook. A campus such as Edinburgh Napier University, under half a mile north-east of Longstone, has long runs of movement joint in its buildings, decks and paving.
Longstone is about 3 miles south-west of Edinburgh, in Edinburgh. We cover commercial sites throughout Longstone. 174 places across Edinburgh fall within our area, Longstone among them.
We cover the EH14, EH11 and EH13 postcode districts for floor joints. We cover commercial and managed buildings on Redhall Road, New Mart Road and Dumbryden Road. Access to Longstone is via the A71. If your building is just outside Longstone, we cover Parkhead (1 mile north-east), Redhall (1 mile east), Kingsknowe (1 mile south), Saughton (1 mile north-west) and Chesser (1 mile north-east). Bigger towns within reach include Edinburgh (3 miles north-east), Leith (5 miles north-east), Bonnington (5 miles north-east), Greenside (4 miles north-east), Broughton (4 miles north-east) and Bellevue (4 miles north-east).
Local landmarks in Longstone
Locally, jobs take us to sites close to Saughton Park, Balgreen Primary School and Firrhill High School. Longstone has its own railway station: Kingsknowe station. Well-known places in the area include Craiglockhart Hydropathic (0.9 miles south-east) and The Gyle Shopping Centre (2.4 miles north-west). Not far away are Craiglockhart Hill and The New Leaf Co-op.
Longstone: questions and answers
Will you take on work at estates like Hailes Park Industrial Estate, close to Longstone?
Yes. Our area takes in Longstone and its surroundings, with estates and business parks such as Hailes Park Industrial Estate included. A few photos and the unit address let us price the work.
Is hospital work, at somewhere like Spire Murrayfield Hospital, something you do?
Yes, provided the work is planned with the site’s estates team. Before anything starts, the estates team agrees permits, inductions and infection-control measures with us.
What happens if old sealant might contain asbestos?
The duty to manage asbestos sits with the building’s dutyholder, so for older buildings we ask for the asbestos register first. If anything suspect turns up, we stop until it’s tested.
How long before trucks can use the joints?
The wait is set by the product’s cure time, and cold floors slow it down. We plan the phasing so that waiting time fits your operation.
What happens if the joint edges are damaged?
Edge condition is recorded when we look at the floor. Damaged edges are flagged up front, so nothing is filled that won’t hold.
Are you insured?
Yes. Mastic Doctor is fully insured, public liability included.
How long do sealant joints last?
There’s no fixed lifespan: movement, exposure, cleaning, traffic and the product all play a part. Sealant joints are maintenance items, so inspect them regularly.
Also in Longstone
On site: what to expect
We follow your site rules from the start: sign-in, induction and whatever permit system the building uses. Once we are cleared to begin, the joints are worked through in the order agreed with your site contact. In a Scottish city, kerbside space and loading need planning, especially near the centre. Tenement closes, shared stairs and factor approvals may also be involved.
- We look at joint widths, edge condition and the traffic on each route.
- The quote fixes the price, names the filler or sealant and shows how the floor will be zoned.
- Each joint is cleared of old fill and dirt and taken back to clean, sound edges.
- We vacuum each run and prime it if the chosen product requires a primer.
- We fill each joint to depth and finish it flush so wheels roll straight across.
- The area is handed back once it has cured enough to take traffic.
Preparing the site
- Move anything stored against the joints
- Tell us your opening times and when work is allowed
- Arrange parking or a loading space
Getting a fixed quote
We quote a fixed sum against the scope you give us, so the cost is agreed before work starts. To ask for one, speak to us on 01277 525 020 or send photos by email.