Industrial and floor joint sealing in Bonnington, Edinburgh
Floor joint sealing for Bonnington, from a contractor working since 2005. Fully insured, with a 12-month guarantee.
- A rough ride across broken joints
- A gap opening alongside old joint filler
- Broken arrises where pallet trucks cross
Floor joint sealing across Bonnington
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
When to bring in a specialist
Putting right a botched joint often costs more than sealing it well at the start, because the whole bead must be removed and the faces cleaned back again. That’s why many clients bring in a specialist from the beginning.
There’s also the paperwork. Main contractors and clients often ask for CSCS cards, RAMS and insurance details, and our CSCS-carded applicators are used to working under those rules.
Floor joint sealing for commercial buildings in Bonnington
Concrete floors in warehouses and factories are cut into bays with saw cuts and day joints, and every one of those joints is an exposed edge under hard wheels. We fill or seal them with a product matched to the traffic and the movement so the edges are held up and debris can’t pack in. Site teams most often ask us about loading bay joints breaking down and unfilled floor joints collecting dirt and grit, on loading bays, joints along racking aisles and construction joints. For commercial sealant work in Bonnington, you deal with one contact from quote to sign-off, whether it’s one building or several.
In Scottish cities, where newer extensions meet older stone buildings, movement joints take the difference. They need the right movement class and correct width and depth to last.
Every job ends the same way: guaranteed. You get a 12-month guarantee on our workmanship, and we explain exactly what that covers when we quote.
- Where
- Bonnington (EH6, EH7, EH5)
- Wider area
- Edinburgh
- Guarantee
- 12 months on our workmanship
- Quotes
- Quoted before any work starts
- Phone
- 01277 525 020
- Last updated
- 3 November 2026
Also near Bonnington
More services for Bonnington
Traffic, movement and joints around Bonnington
Bonnington lies within about 1 mile of the sea. Near the sea, external slabs, ramps and decks see salt air and driven rain as well as their usual loads, and edges left open tend to break up faster. The east of Scotland, where Bonnington is, gets less rain than the west. Frost and de-icing salt still find their way into open external joints. Resealing before the cold months helps protect the edges.
Campuses like University of Edinburgh - Holyrood Campus (to the south of Bonnington) mix old and new buildings, with movement joints wherever they meet. Across sites such as Swanfield Industrial Estate (less than half a mile north-east of Bonnington), floor and movement joints can be sealed in phases so units keep working.
Bonnington is about 2 miles north-east of Edinburgh, in Edinburgh. Any commercial site in Bonnington is covered, for single jobs and planned programmes alike. Across Edinburgh, 174 places are covered, including Bonnington.
We cover the EH6, EH7 and EH5 postcode districts. We cover commercial and managed buildings on Fyfe Lane, Haig Lane and Mill Lane and the roads nearby. Nearby places we also cover include North Leith (1 mile north), Pilrig (1 mile south), Powderhall (1 mile south-west), Timber Bush (1 mile north-east) and Victoria Park (1 mile north-west). Further afield, our area takes in Merchiston (3 miles south-west), Queensferry (8 miles west), Burgh Muir (3 miles south), South Portobello (3 miles south-east), Southhouse (5 miles south) and Mayfield (3 miles south). Bonnington ranks among the main centres of Edinburgh, with offices, shops, schools and other public and commercial buildings, and we cover them all.
Around Bonnington
Locally, jobs take us to sites close to London Street Primary School, The Foot of the Walk pub and Leith Academy. Nearby too are Taylor Gardens (under half a mile north) and McDonald Road Library (0.7 miles south). Bonnington’s nearest station is Edinburgh Waverley station, roughly 1.4 miles south of the centre. Well-known places in the area include Museum of Scottish Fire Heritage (0.5 miles south) and Ocean Terminal (0.7 miles north). For a walk, there’s Whinny Hill and The New Leaf Co-op.
How the job changes by surface
Isolation joints at walls and columns
Perimeter and column joints get forgotten, and they collect dust and debris. We record them with the rest of the floor joints.
Loading bays and dock areas
Dock areas see tight turns, heavy loads and weather blowing in. Joints here normally fail first so many programmes begin here.
When to call us in Bonnington
Small, hard wheels put a lot of load through a very small area. Where a joint is open, the wheel dips and strikes the far edge and those knocks chip the edge apart bit by bit.
Most enquiries start with one or more of the following:
- Grimy joint lines spoiling a showroom floor
- Flexible sealant torn out by wheels
- Cracked and crumbling joint fill
- Failing joints at loading bays and dock doors
Parks like Bonnington Business Centre (to the east of Bonnington) combine paved areas, car parks and building elevations, each with joints that move.
Questions to ask before you book
- Their pre-qualification and accreditations
- The terms of the workmanship guarantee
- Their public liability cover
- Is the sealant right for the movement and the substrate?
Commercial clients in Bonnington
Housing associations and managing agents often need work done across blocks and communal areas. We phase the work so people keep access, and each stage is agreed with your contact.
Planned maintenance programmes are welcome: working through a building or an estate in stages that fit your budget. Bonnington can form part of a wider programme.
FAQs: Bonnington
Can you work on a hospital site such as Western General Hospital (Edinburgh)?
Yes. We work in healthcare settings as well as offices and schools. We follow the site’s permits, sign-in and infection-control procedures in every area.
Do you cover business parks and estates near Bonnington, such as Bonnington Business Centre?
Yes. Our area takes in Bonnington and its surroundings, with estates and business parks such as Bonnington Business Centre included. A few photographs and the unit address let us price the work.
Can you phase floor joint work around operations?
Typically only the zone we’re working in has to close. Each zone reopens when the product can take traffic and the next zone follows.
Do you seal on top of existing sealant?
No. Failed sealant is removed and the faces cleaned back to sound, dry material first, since fresh sealant will not bond reliably to aged material.
How long will the new sealant last?
Nobody can honestly give a figure in years, because life depends on how much the joint moves, how exposed it is and how it’s cleaned and used. Regular checks let you plan resealing before leaks or damage.
Should floor joints be filled or sealed?
There isn’t one answer for a whole floor. Hard wheels need edge support, which points to a semi-rigid filler and perimeter or movement joints need flexibility. You will see the choice for each area in the quote.
How long before trucks can use the joints?
Cure times vary with the product and the conditions. We will give you a time for each zone before we start.
How a job runs
Site rules come first: sign-in, induction and whatever permit system the building uses. With the paperwork done, we take the joints in the sequence agreed with you. Work on a big city site in Scotland normally involves inductions and permits. Pass on the site’s contractor rules when you get in touch.
- We agree the traffic routes and phasing with your site team.
- Any joints with broken edges are flagged before work starts.
- Failed material and debris are removed and the joint cleaned.
- The chosen filler or sealant goes in flush with the slab.
- Each area is handed back when ready for traffic.
Getting the site ready
- Point out any areas we must not close
- Confirm the product named in the specification
- Tell us what induction or permit system the site runs
Getting a fixed quote
Send us photographs, drawings or a joint schedule and a fixed quote comes back to you. Where a site visit makes more sense, we will arrange one.
Advice
Honest limits
We seal joints; we don’t mend everything behind them. Sealant alone won’t deal with:
- A floor that is out of level for the racking or trucks
- A floor that rocks at the joints, which needs a structural fix
- Broken concrete either side of the joint
Not sure which it is? You can give us a call on 01277 525 020 or send photos by email and we will tell you honestly before you book.
What we seal
- Joints along racking aisles
- Construction joints
- Forklift and pallet-truck routes
- Retail and showroom floors
- Saw-cut induced joints
- Loading bays